Page 1
nVent CADDY Speed Link SLK with Y-Toggle–SLK15Y500L3R2
YL
F
A
B
H
W
T
a
• Complete system includes wire, locking device and two pre-assembled toggle end fittings
• Attaches to clearance holes in a variety of structures or hanging devices
• Ideal for supporting lighting fixtures
Part Number SLK15Y500L3R2
Material Steel
Finish Electrogalvanized
Static Load Safety Factor 5:1
Complies With SMACNA HVAC-DCS
Wire Rope Diameter 1.5 mm
Wire Rope Length 9.9'
Wire Rope "Y" Length (YL) 19.6"
A 1.54"
B 0.2"
Static Load (F) 44 lb
Height (H) 2.15"
Width (W) 3/4"
Thickness (T) 1/2"
Angle (a) 90° Max
Certifications cULus
Standard Packaging Quantity 15 x 2 pc
UPC 78285685439
Zinc Alloy
Polypropylene
Page 2
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.
WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from
your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent 's instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your warranty.
© 2020nVentAll rights reserved
nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX and nVent LENTON are owned by nVent or its global affiliates.
All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.
Loading...