Hammer-On Flange Clip, Bottom Mount–M1318
• Can be used to support boxes, fixtures or other applications from beam flanges
• Assorted attachment points provided to reduce inventory
• Requires only a hammer to install
Part Number M1318
Material Spring Steel
Finish nVent CADDY Armour
Flange Thickness (FT) 13/16" – 1 1/8"
Rod Size (RS) 1/4"
Static Load 1 (F1) 100 lb
Static Load 2 (F2) 25 lb
Static Load 3 (F3) 75 lb
Certifications cULus
Standard Packaging Quantity 50 pc
UPC 78285695355
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.
WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from
your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent 's instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your warranty.
© 2021nVentAll rights reserved
nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX and nVent LENTON are owned by nVent or its global affiliates.
All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.