nVent BC-MSM User Manual
BC-MSM Conduit to Beam Clamp, Side Mount–BC20MSM
FT
TQ
OD
F
• Easy installation to beam flanges
• Eliminates offset bending conduit
• Conduit clip rotates 360 degrees
Part Number BC20MSM
Material Spring Steel
Finish nVent CADDY Armour
EMT Conduit Size 1 1/4"
Rigid Conduit/Pipe Size 1 1/4"
Flange Thickness (FT) 1/2" Max
Torque (TQ) 20 ft lb
Static Load (F) 25 lb
Certifications cULus
Standard Packaging Quantity 100 pc
UPC 78285619820
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.
WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from
your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent 's instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your warranty.
© 2020nVentAll rights reserved
nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX and nVent LENTON are owned by nVent or its global affiliates.
All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.
Loading...