nVent BC110000EG User Manual

BC11/BC12 Multi-Function Clamp with J-Bolt–BC110000EG

FT

A

B

Sc

F1

F2

RS

C

• Structural attachment to beams to support threaded rod

• J-bolt provides additional stability in high vibration environments

Part Number BC110000EG

Material Steel

Finish Electrogalvanized

Rod Size (RS) 3/8"

1/2"

Flange Thickness (FT) 3/4" Max

Screw Diameter (Sc) 3/8"

A 8 1/2"

B 1"

C 1"

Static Load 1 (F1) 500 lb

Static Load 2 (F2) 300 lb

Standard Packaging Quantity 25 pc

UPC 78285634007

Setscrew must be tightened and torqued onto the sloped side of the I-beam.

WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from
your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent 's instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your warranty.



© 2020nVentAll rights reserved
nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX and nVent LENTON are owned by nVent or its global affiliates.
All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.