nVent 812MATS User Manual

MATS Conduit to T-Grid Clip–812MATS

OD

• Provides a method of securing conduit above acoustical tee bar

• Clip rotates for securing conduit in either horizontal or vertical orientation

• No tools required for installation

• Eliminates need for offset bending conduit

Part Number 812MATS

Material Spring Steel

Finish nVent CADDY Armour

EMT Conduit Size 1/2"

Outer Diameter (OD) 0.709" – 1.181"

Standard Packaging Quantity 100 pc

UPC 78285660810

EAN-13 8711893772036

No load rating, for positioning only.
Additional support required per NEC® 300.11.

NEC is a registered trademark of, and National Electrical Code (NEC) standard is a copyright of the National Fire Protection Association, Inc.



WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from
your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent 's instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your warranty.



© 2020nVentAll rights reserved
nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX and nVent LENTON are owned by nVent or its global affiliates.
All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

3/4"