nVent 4180400EG User Manual

Page 1
418 J-Hanger–4180400EG
A
RS
B
C
F
• Recommended for the suspension of stationary non-insulated pipe lines
• T-slot hole for bolt head permits disengagement of side bolt without removing the nut (sizes 1/2” thru 4” only)
• Side hole permits wall mounting (sizes 1/2” thru 4” only)
• Conforms with Manufacturers Standardization Society (MSS) SP-58 (Type 5)
Part Number 4180400EG
Material Steel
Finish Electrogalvanized
Pipe Size 4"
Rod Size (RS) 5/8"
A 9"
B 5 7/16"
C 3 11/16"
Static Load (F) 800 lb
Standard Packaging Quantity 25 pc
UPC 78285634002
WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent 's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
© 2020nVentAll rights reserved nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.
Loading...