Page 1
Inground Post/Mount Installation
STEP: 1
DO NOT CEMENT POSTS/MOUNTS
INTO PLACE UNTIL THE ENTIRE
STRUCTURE IS ASSEMBLED.
Refer to the General Installation
guide footing size information and
digging proper holes for the support
posts/mounts.
10859 E Washington St. Suite 200
Indianapolis, IN 46229
1-800-667-0097
Page 1 of 1 (Post Installation)
Created By: Gage Brown
Date: 04/26/2018
Page 2
3.5-inch Clamp Installation Examples
The following three pages will include examples of how to install some of the most
common types of Clamps that are present on our structures that use 3.5-inch outside
diameter posts. The structure that you are assembling might not require all the types of
clamps listed in these examples.
T
he Install Guides for specific components that come later in this document might
call for a specific type of clamp (a tube clamp for example), those sections will not include
detailed instructions for the clamps and should direct you back to this section for more
detailed information.
3.
5-inch Flat Clamp Install Example
Connect half of the flat clamp to the
component using one (1) M8*40
bolt. Then, using the other half of the
flat clamp and the hardware
provided in the clamp hardware bag,
attach the backside of the flat clamp
around the post.
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Page 1 of 3 (3.5-inch Clamp Installation Examples)
Created By: Derick H
Date: 11/01/2018
Page 3
3.5-inch Clamp Installation Examples
3.5-inch Tube Clamp Install Example
Connect half of the clamp to the
component using one (1) M8*30
bolt. Then, using the other half of the
tube clamp and the hardware
provided in the clamp hardware bag,
attach the backside of the tube
clamp around the post.
3.5-inch 90-Degree Flat Clamp Install Example
Connect half of the flat clamp to one
panel using one (1) M8*40 bolt.
Then, using the other half of the flat
clamp and the hardware provided in
the clamp hardware bag, attach the
other half of the tube clamp around
the post. Then, attach the next panel
to the other side of the clamp using
the same process.
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Page 2 of 3 (3.5-inch Clamp Installation Examples)
Created By: Derick H
Date: 11/01/2018
Page 4
3.5-inch Clamp Installation Examples
3.5-inch Double Slide Clamp Install Example
Connect half of the double slide
clamp to the double slide hood using
one (1) M8*30 bolt. Then, using the
other half of the clamp and the
hardware provided in the clamp
hardware bag, attach the backside of
the double slide clamp around the
post.
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Page 3 of 3 (3.5-inch Clamp Installation Examples)
Created By: Derick H
Date: 11/01/2018
Page 5
Right Triangle Deck Installation
After the posts are in place, using
three (3) M10*35 bolts, six (6) M10
washers, and three (3) M10 lock
nuts, attach the triangle deck to each
pre-attached deck clamp as shown in
the image.
Deck clamps are pre-attached to the
posts and should not be altered in
any way.
STEP: 1
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Page 1 of 1 (Right Triangle Deck Installation)
Created By: Aaron Price
Date: 03/20/2018
Page 6
2-foot Straight Slide Installation
STEP: 1
T
ake one (1) 3.5-inch flat clamp, and
loosely attach it around a post using
the bolts and nuts provided in the
clamp hardware bag. Repeat this
process on the other post. Then, use
one (1) M8*40 bolt, one (1) M8
washer, and one (1) M8 lock nut to
attach each side of the slide hood to
each clamp. Leave bolts loose until
slide is in place.
STEP: 2
See general installation guide
regarding footing information for the
slide end mount. Using two (2)
M8*20, two (M8) spring gaskets. And
two (2) M8 washers, attach the slide
to the slide support post.
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Page 1 of 2 (2-foot Straight Slide Installation)
Created By: Aaron Price
Date: 03/19/2018
Page 7
2-foot Straight Slide Installation
STEP: 3
Using one (1) M10*45 bolt, two (2)
M10 washers, and two (2) M10 lock
nuts, attach one side of the slide to
the deck.
STEP: 4
Using one (1) M8*45 bolt, one (1) M8
washer, one (1) M12 washer, and
one (1) M12 inner hex spiral nut,
attach the slide to one side of the
slide hood. Repeat this process for
the other side of the slide.
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Page 2 of 2 (2-foot Straight Slide Installation)
Created By: Aaron Price
Date: 03/19/2018
Page 8
3.5-inch Bubble Panel Installation
STEP: 1
Connect the bottom of the panel to
the deck using two (2) M10*50 bolts,
four (4) M10 washers, and two (2)
M10 lock nuts. Then attach the top
of the panel to the posts using two
(2) flat clamps.
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Page 1 of 1 (3.5-inch Bubble Panel Installation)
Created By: Aaron Price
Date: 03/23/2018
Page 9
3.5-inch Drum Panel Installation
STEP: 1
Connect the Drum panel to the
designated post using four (4) tube
clamps.
1 P
layground Drive Created By: Kelly D.
Greenfield, IN 46140 Date: 11/20/2020
1-800-667-0097
Page 1 of 1 (3.5-inch Drum Panel Installation)
Page 10
3.5-inch Gear Panel Installation
STEP: 1
Connect the bottom of the panel to
the deck using two (2) M10*50 bolts,
four (4) M10 washers, and two (2)
M10 lock nuts. Then attach the top
of the panel to the posts using two
(2) flat clamps.
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Page 1 of 1 (3.5-inch Gear Panel Installation)
Created By: Aaron Price
Date: 03/23/2018
Page 11
3.5-inch Metal Barrier with Ships Wheel
Installation
STEP: 1
Attach the metal barrier to the
designated posts using four (4) tube
clamps four (4) M8*30 bolts.
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Page 1 of 1 (3.5-inch Metal Barrier with Ships Wheel Installation)
Created By: Kelly D.
Date: 12/17/2020
Page 12
3.5-inch Tic Tac Toe Panel Installation
STEP: 1
Connect the bottom of the panel to
the deck using two (2) M10*50 bolts,
four (4) M10 washers, and two (2)
M10 lock nuts. Then attach the top
of the panel to the posts using two
(2) flat clamps.
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Page 1 of 1 (3.5-inch Tic Tac Toe Panel Installation)
Created By: Aaron Price
Date: 03/23/2018
Page 13
Rain Wheel Installation
Detach half of the
tube clamp
connected to the Rain Wheel, and re-
attach the clamp around the support
post, as shown in the picture.
Recommended install height is 20 to
36 inches above surfacing depending
on age range.
We recommend using Thread-locking
fluid on bolts connecting Rain wheel
to clamp to prevent hardware from
loosening over time.
(Thread-locker not supplied)
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Page 1 of 1 (Rain Wheel Installation)
C
reated By: Aaron Price
Date: 03/29/2018
Page 14
Line Roof Installation
STEP: 1
Set the line roof on top of the posts.
Take four (4) self-tapping screws and
drill them through the notch at each
corner of the roof, into the support
posts.
10859 Washington St. Suite
200, Indianapolis, IN
1-800-667-0097
Created By: Aaron Price
Date: 03/19/2018
Page 1 of 1 (Line Roof Installation)
Loading...