nux nUX Time Core Deluxe NUX Device Firmware Update Guide - English

Step 1 : Connect To Computer
Step 2 : Open NUX DFU Updater
A) Unplug power supply from pedal.
B) Connect micro-USB cable from computer
to pedal.
A) Click on: B) Hold down pedal footswitch &
USB
NUX DFU Updater
Plug in the power receptor.
Open Window You Will See
NUX Firmware Updater v1
(no device found)
1. Click 'Select file’ button to select an firmware file.
Start Update Select File...
v1.1.2
v1.1.2
1. Click 'Select file’ button to select an firmware file.
NUX Firmware Updater v1
(no device found)
Start Update Select File...
v1.1.2
v1.1.2
Step 3 : Select Pedal Bin Step 4 : Start Updating
NUX Firmware Updater v1
NUX Firmware Updater v1
YOUR PEDAL NAME
1. Click 'Select file’ button to select an firmware file.
Start Update Select File...
v1.1.2
v1.1.2
Product:V1
Version:2.0.0
V2.0
1.Support Tape Core Editor
2.Add new reverb effect (need TapeCore Editor)
3.Add Smart Tap Tempo Mode (need TapeCore Editor)
4.Add Sync Mode (need TapeCore Editor)
2.Let Device into DFU mode and connect To Computer.
Ensure the firmware is match the device.
NUX Firmware Updater v1
YOUR PEDAL NAME
Start Update Select File...
v1.1.2
v1.1.2
YOUR PEDAL NAME
Product: Monterey Vibe
Version: MR01M1.1
v1.1
1.Adds new vibrato mode.
Usage: Press and hold foot switch for 2 seconds to switch effects between
chorus and vibrato.
RED LED: Chorus mode
GREEN LED: Vibrato mode
2.Adds smart tao tempo
Usage: tap the foot switch to the beat(quarter-note tempo). the speed of
effect will change to the interval between the last two taps. The two taps
must be less than 1.5 seconds apart(greater than 40 BPM).
3.Device found. Click update and continue.
Start Update Select File...
v1.1.2
v1.1.2
Light Will Flash
( During & After
Update Complete )
A) Click on:
Select File
Start Update
Step 5 : Let File Install Step 6 : Finishing Update
B) Unplug power & micro-USB from pedal A) Close the update window
C) Enjoy the pedal !
Do Not Unplug Pedal !
When Update is Complete Will Say
NUX Firmware Updater v1
YOUR PEDAL NAME
Product: Monterey Vibe
Version: MR01M1.1
v1.1
1.Adds new vibrato mode.
Usage: Press and hold foot switch for 2 seconds to switch effects between
chorus and vibrato.
RED LED: Chorus mode
GREEN LED: Vibrato mode
2.Adds smart tao tempo
Usage: tap the foot switch to the beat(quarter-note tempo). the speed of
effect will change to the interval between the last two taps. The two taps
must be less than 1.5 seconds apart(greater than 40 BPM).
4. Update Finished.
Start Update Select File...
v1.1.2
v1.1.2
NUX Firmware Updater v1
YOUR PEDAL NAME
Product: Monterey Vibe
Version: MR01M1.1
v1.1
1.Adds new vibrato mode.
Usage: Press and hold foot switch for 2 seconds to switch effects between
chorus and vibrato.
RED LED: Chorus mode
GREEN LED: Vibrato mode
2.Adds smart tao tempo
Usage: tap the foot switch to the beat(quarter-note tempo). the speed of
effect will change to the interval between the last two taps. The two taps
must be less than 1.5 seconds apart(greater than 40 BPM).
4. Update Finished.
Start Update Select File...
v1.1.2
v1.1.2
Loading...