Nux AC-80 Owner`s Manual
Control Panel
Control Panel
1. INPUT JACK
Connect electric-acoustic guitar with cable to the 1/4”
INPUT jack.
2. Ch1 3-WAY TOGGLE SWITCH
You can choose 3 different EQ scenes for channel 1 input.
NOR=Normal means flat EQ
FINGER=Finger Style means a little bit bright,
STRUM=Strum Style means strong mid-low end response.
3. GAIN KNOB
Controls the input level.
4. BASS / MIDDLE / TREBLE KNOBS
These 3 knobs control related low / mid / high end
response.
5. REVERB KNOB
Controls Reverb MIX level.
6. EFX KNOB
Controls related effect MIX, you can choose the effect
model through APP.
0403
Control Panel
Control Panel
1. COMBO INPUT JACK
You can connect with electric-acoustic guitar or dynamic
microphone.
2. 2-WAY TOGGLE SWITCH
You can switch to phase to avoid feedback issue while
you use dual output system.
3. GAIN KNOB
Controls the input level.
4. BASS / MIDDLE / TREBLE KNOBS
These 3 knobs control related low / mid / high end
response.
5. EFX KNOB
Controls related effect MIX, you can choose the effect
model through APP.
6. REVERB KNOB
Controls Reverb MIX level.
7. BLUETOOTH INDICATOR
While the amp connects with mobile device
(Bluetooth Audio Stream), the indicator will turn on,
and you can hear “bi~” from the amp. If there is no
connection, the indicator will flash.
For APP connection, please open the STAGMEN APP,
and go to “Settings” to choose “Current Amp” as
“Stageman II”. Then click to scan devices, and you will
find Stageman II. Click it, it will connect
automatically. Since connected, you can tweak all the
parameters from mobile phone.
8. LOOP INDICATOR
REC=Red , DUB=Orange , PLAY=Green
9. MASTER KNOB
Controls the overall level to power amp section.
10. POWER SWITCH & INDICATOR
Toggle the switch to turn on the amp, the indicator
will also turn on.
0605
Loading...