Page 1
Contact Customer Service:
1-847-775-8123 or 1-888-689-2831
M-F 8:00AM to 4:30PM (CST)
picsupport@hearthware.com
www.nuwaveperfectgreen.com
Eco Friendly:
No PTFE
No PFOA
No BPA
No Cadmium
See back for more details
Page 2
Important Safeguards
• Do not allow children near appliances while you cook.
• To avoid injury, always use caution when handling cookware.
• For safety reasons, make sure handles do not extend over the edge of any
cooking appliances and never leave cookware unattended while in use.
• The handles of this cookware are constructed to minimize heat transfer,
however lids and handles may become hot during prolonged cooking.
• Use caution when removing lids or lifting handles. Touch lightly to be certain the
handles are safe for lifting. Use oven mitts or potholders if necessary.
• Use caution when removing lids. Steam may accumulate in the cookware.
• Always use oven mitts when removing pans from any heat source
About Duralon™ Coating
Duralon™ is a natural and safe ceramic material that is long lasting and
eco-friendly because it contains no PFOA*, PTFE* or Cadmium. Duralon™
coating is very durable, registering a 9H grade compared to ordinary teon
coatings between 2-3H grade. A diamond is 10H grade.
When using natural ceramic there are no chemical reactions during the
application process. This means there are no harmful chemicals used in our
Duralon™ non-stick coating which makes it healthier. Even if you accidentally
overheat your pan, no toxic fumes will be released which are especially
dangerous to small animals. In addition, the coating itself will not blister or peel.
The PerfectGreen™ pan can withstand heats up to 932°F for short periods. The
recommended cooking temperature should not exceed 480°F.
*See more information on the back of this manual.
For more information regarding induction cooking, Precision™ Induction
Cooktop products or recipes, visit us at: www.nuwavepic.com.
NuWave PerfectGreen™ Pan
Fry Pan: Fry Pan Lid (Optional):
9-inch (#32009) 9-inch Fry Pan Lid (#32012)
10.5-inch (#32010) 10.5-inch Fry Pan Lid (#32004)
11.5-inch (#32011) 11.5-inch Fry Pan Lid (#32013)
Pan Materials: 18/10 Stainless Steel with 9H Duralon™ Ceramic Coating.
Lid Materials: Tempered Glass with Stainless Steel handle, rim and vent.
Page 3
Care & Usage
• Always wash new cookware prior to initial use.
• Hand wash only. Use warm soapy water with a soft sponge or dishcloth and
rinse and dry. You can also simply wipe and clean with a damp paper towel.
• Most dishwasher detergents can damage the surface. Do not use a dishwasher
or dishwasher detergents.
• Do not use steel wool or any other abrasive materials that may scratch the
surface of your pan.
• Use plastic or wooden utensils while cooking. Metal whisks, mashers and/or
sharp knifes will scratch the surface. Never attempt to cut foods while they are
in the pan. Any misuse will void the warranty (See back of manual for details).
• Handle using pot holders or oven gloves to avoid injury.
• For best results, before cooking, allow pan to heat up to 1 minute, heating the
empty pan between 280°F - 300°F, before inserting foods.
• After cooking, always allow the pan and lid to cool down to room temperature
before cleaning.
• Although the natural ceramic nish is extremely durable, it can become
damaged if not stored properly. A hanging rack is ideal. When storing in a
drawer or cabinet use care when stacking with other pots and pans. This will
help avoid scratches or dings that may cause the ceramic surface to separate
from the stainless steel.
Making Your NuWave PerfectGreen™ Pans Last
• Use your non-stick cookware on medium to medium/high heat (275°F - 375°F).
High heat can cause food to scorch, burn and discolor the pan.
• Avoid over heating of empty cookware. If empty, the maximum temperature
should not exceed 300°F.
• Avoid pre-heating pans on high temperature settings. The nature of Duralon™
non-stick coating is to hold and distribute the heat more effectively which will
help protein-rich foods cook more quickly.
• Always let your pan cool down to room temperature before washing.
• Never run cold or warm water onto a hot pan or immerse the heated pan in
cold water.
• The ideal temperature for washing Duralon™ coated pans is between 90°F
and 110°F.
Keep in mind, discoloration and small surface markings may appear with use.
This will not affect the quality or performance of the pan.
Page 4
Limited Warranty
This product is warranted to be free from defects in material and workmanship
under normal household use for 10 years for the cookware (coating not
included).
Warranty does not apply to damages resulting from accidents, abuse or
misuse, including damage caused by overheating. Warranty does not apply
to scratches, stains, discoloration or other damage, or anything that does not
impair the functionality of the products. Damages caused by heating above
the recommended temperatures or abuse will not be covered under the limited
warranty.
The manufacturer’s obligation shall be limited to repairing and/or replacing, any
part of the product that is defective. The customer is responsible for any shipping
cost incurred.
Discoloration and small surface markings may appear with use. This will not
affect the quality or performance of the pan.
What is PFOA and PTFE?
How can it be harmful to me?
PFOA is a chemical that is used in the manufacturing of traditional PTFE-based
non-stick cookware coatings and other products. PFOA is a carcinogen and has
been found in normal climates, and can damage the environment and risk your
health. We at Hearthware want to help eliminate product content of PFOA. Our
Duralon™ coating is made without this chemical.
PTFE is a chemical found in certain non-stick coatings. PTFE can begin to
degrade at temperatures over 500ºF. With our Duralon™ coating, no PTFE
will be released, even if you accidently overheat your pan. In addition, the coating
itself will not blister or peel. Our coating can resist higher temperatures than
many of our competitors, so there is less risk of damage.
Any material containing PTFE is not recommended for use around birds. For
more information go to http://www.ewg.org/node/21780.
US Patents Pending.
Manufactured and Distributed by:
Hearthware, Inc.
1755 N. Buttereld Road • Libertyville, IL • 60048, U.S.A.
© 2011 Hearthware, Inc. All Rights Reserved
Manual Model#
32057 - GRP-M6
www.NuWaveNow.com
Loading...