Page 1
TPEN-H1BK Digital Pen
Instructions
This NuVision Digital Pen works
with any device using Windows
INK with MPP protocol.
PACKAGE CONTENTS:
• Digital Pen
• (1) AAAA Battery
• (2) Soft Tips
• (2) Hard Tips
• Tip Replacement Tool
NOTE: One of the Tips is
installed in the Digital Pen.
INSTALL THE BATTERY
1. Unscrew the top of the pen by
turning it counter-clockwise.
2. Insert one battery, positive (+)
side down, into the battery
compartment.
3. Replace the pen top by
screwing back on, clockwise.
Battery
TMAX Digital Inc. warrants this product against defects
in material or workmanship for a period of one (1) year
from the date of original purchase (“Limited Warranty
period”) and at its own option either to (a) repair your
product with new or refurbished parts, or (b) replace it
with a new or a refurbished product. TMAX Digital Inc.
will incur no liability whatsoever to provide packaging
for warranty items. Upon receipt of the warranty item,
should it be determined that the packaging is insufficient,
TMAX Digital Inc may at its discretion, void the warranty.
The consumer is responsible for the transportation cost
to TMAX Digital Inc. A nominal handling fee does apply.
You must receive a return authorization number before
sending a unit in for service.
TO OBTAIN WARRANTY SERVICE
Should it be necessary to contact Customer Support,
call (800) 890-1288 or email at cs@nuvision.com. You
will be instructed on how your claim will be processed.
Have pertinent information available including proof of
purchase and an understanding of the issue.
You must retain the original bill of sale to provide proof
of purchase. Call or email Customer Support to assess the
problem. No service or shipment will be accepted unless
an RMA # is provided to you and attached or printed to
the shipping carton along with a copy of the bill of sale.
This warranty is effective only if the product was
purchased through an Authorized Retail Seller and the
unit is operated in North America. You are responsible for
all tariffs and taxes imposed to ship or receive warranty
or replacement units to and from the U.S. Warranty
extends only to defects in materials or workmanship and
does not extend to any other products that have been
lost, discarded or damaged by misuse, accident, neglect,
acts of God, such as lightning, improper installation,
improper maintenance or modification. The Limited
Warranty ALSO DOES NOT COVER damages from having
been previously altered, modified, repaired or serviced
by anyone other than the service facilities authorized by
TMAX Digital Inc. to render such services. Warranty does
not cover cosmetic damage or lost accessories.
TMAX DIGITAL Inc. reserves the rights to change the
warranty from time to time without written notice to you.
DISCLAIMER OF WARRANTY
EXCEPT FOR THE FOREGOING WARRANTIES, TMAX
DIGITAL INC. HEREBY DISCLAIMS AND EXCLUDES
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO ANY AND/OR
ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY
WARRANTY WITH REGARDS TO ANY CLAIMS OF
INFRINGEMENT.
LIMITATION OF LIABILITY
BOTH YOURS AND TMAX’S LIABILITY SHALL BE
LIMITED TO THE PRICE PAID FOR PRODUCT. IN NO
EVENT SHALL TMAX DIGITAL INC. BE LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION, REIMBURSEMENT OR
DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS OR FOR ANY OTHER REASON
WHATSOEVER.
Contact NuVision Technical Support
Email: cs@nuvision.com
Phone: (800) 890-1288
Hours: 8:30am to 5:30pm PST M-F
Page 2
USING THE DIGITAL PEN
To ‘awaken’ the pen from sleep
mode, press either Eraser or Alt
buttons. Your pen will be active
and ready to use.
PARTS OF THE PEN
RECOMMENDED: Keep the
unused tips in the foam portion
of the package.
1
2
4
5
6
3
Battery
1
Tip
2
Pen Head
3
Eraser Button
4
Alt Button (Mouse Right-Click)
5
Clip
6
Top of Pen
7
AAAA Battery (Inserts Positive
end towards the Tip)
8
Use Tip Replacement Tool to
remove/replace Tip
REPLACING THE TIP
The NuVision Digital Pen comes
with 2 types of Tips, Soft and
Hard. They can be removed and
replaced by using the included
Tip Replacement Tool as follows:
1. With the Tip Replacement Tool
in one hand, and the Pen in
another, bring the Tool over the
tip of the Pen.
2. Pinch the tool closed around
the Tip, and slowly pull the Tip
out of the body of the Pen.
3. To place a new tip, use the Tip
Replacement Tool to remove a
tip from the packaging. With
the pointed end of the Tip
pinched in the Tool, slide the
new Tip into the Pen until the
neck of the Tip is not visible.
WARNING: Choking Hazard
This device may contain small
parts which may be a choking
hazard to children under 3. Keep
small parts away from children.
Erase Button
Alt Button
Loading...