Nuvico PA-WMJB200 User Manual

PA-WMJB200

www.nuvico.com

Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

Before You Begin

Read these instructions before installing or operating this product.

Note: This installation should be made by a qualified service person and should conform to local codes.

This manual provides installation and operation information. To use this document, you must have
the following minimum qualifications:

 A basic knowledge of CCTV systems and components
 A basic knowledge of electrical wiring and low-voltage electrical connections

Intended use

Only use this product for its designated purpose; refer to the product specification and user
documentation.

Customer Support

For assistance in installing, operating, maintaining and troubleshooting this product refer to this
document and any other documentation provided. If you still have questions, please contact Norbain
Technical Support and Sales:

Norbain House
Eskdale Road, Winnersh Triangle, Wokingham, Berks
RG41 5TS
0118-944-0123

Note: You should be at the equipment and ready with details before calling Technical Support.

Conventions Used in this Manual

Boldface or button icons highlight command entries. The following WARNING, CAUTION and Note

statements identify potential hazards that can occur if the equipment is not handled properly:

* WARNING:

Improper use of this equipment can cause severe bodily injury or equipment damage.

** Caution:

Improper use of this equipment can cause equipment damage.

Note: Notes contain important information about a product or procedure.

RoHS Announcement

All lead-free products offered by the company comply with the requirements of the European law on the
Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and
products are strictly “lead-free” and without the hazardous substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must be
collected separately at the product end-of-life. This applies to your product and any peripherals marked with
this symbol. Do not dispose of these products as unsorted municipal waste.

CE Mark

This apparatus is manufactured to comply with the radio interference. The company does not warrant that
this manual will be uninterrupted or error-free. We reserve the right to revise or remove any content in this
manual at any time.

2

* This symbol indicates electrical warnings and cautions.
** This symbol indicates general warnings and cautions.

WARNINGS AND CAUTIONS:

To reduce the risk of fire or electric shock, do not insert any metallic objects through the ventilation grills or other
openings on the equipment.

CAUTION:

PRECAUTIONS

Safety-----------------------------------------------

Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by a qualified
person before operating it again.

Unplug the unit from the wall outlet if it is not going
to be used for several days. To disconnect the
cord, pull it out by the plug, never by the cord itself.

Allow adequate air circulation to prevent internal
heat build-up. Do not place the unit on surfaces
(rugs, blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation holes.

Features

* Simple and Easy Installation

* Wall Mounting Die cast aluminium box
* Included a Wall Mount at Front panel with hinge
* Indoor/ Outdoor applications
* Weatherproof - IP66

The height and linearity controls located at the rear
panel are for adjustments by qualifies personnel
only.

Installation----------------------------------------

Do not install the unit in extremely hot or humid
environments or places exposed to excessive dust
or mechanical vibrations.

Cleaning-------------------------------------------

Clean the unit with a slightly damp soft cloth. Use a
mild household detergent. Never use strong
solvents such as thinner or benzene as they might
damage the finish of the unit.

3