Nuvico CF-ED2N User Manual

Disclaimer

• While every effort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions.

• NUVICO reserves the right to change the specifications of the hardware and software
described herein at any time without prior notice.

• No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language in any form, by any means, without prior written
permission of NUVICO.

• NUVICO makes no warranties for damages resulting from corrupted or lost data due to a
mistaken operation or malfunction of the Speed Dome Cameras, peripheral devices, or
unapproved/unsupported devices.

3

Warning and Caution

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS
THROUGH THE VENTILATION GRILLS OR OPENINGS ON THE EQUIPMENT.

CAUTION

The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instruction in the literature accompanying the product.

4

FCC Compliances Statement

FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO

COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO
PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN
THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE
INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL
AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE
USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN

EXPENSE.

CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY
THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL EQUIPMENT COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA

NORME NMB-003 DU CANADA.

CE Compliances Statement

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS
PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER
MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

5

Important Safeguards

1. Read these instructions.

2. Heed all warnings.

3. Follow all instructions.

4. Do not use this equipment near water.

5. Clean only with dry cloth.

6. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.

7. Do not install near any heat sources such as radiators, heat registers, stoves, or other
equipment (including amplifiers) that produce heat.

8. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

9. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the equipment.

10. Only use attachments/accessories specified by the manufacturer.

11. Unplug this equipment during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualified service personnel. Servicing is required when the
equipment has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the equipment, the
equipment has been exposed to rain or moisture, does not operate normally, or has
been dropped.

13. CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED
SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE
OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

14. Use Certified/Listed Class 2 power supply transformer only.

6

Introduction

IMPORTANT:

ABOUT THIS MANUAL

Thank you for purchasing NUVICO Fixed Camera.

Our Fixed Cameras are all equipped with high resolution 1/3” Interline transfer CCD Imager
for enhanced low light sensitivity. Super 700 TV Lines combined with ICR-filter, HLC (High
Light Compensation), and, ATR (Adaptive Tone Reproduction) feature.

checking and complying with local, state, and federal laws and
statutes concerning the recording and monitoring of audio
signals.

The user of this camera is responsible for

7

Table of Contents

Disclaimer ............................................................................................................................. 3

Warning and Caution ........................................................................................................... 4

FCC Compliances Statement............................................................................................... 5

Important Safeguards .......................................................................................................... 6

Introduction........................................................................................................................... 7

Table of Contents ................................................................................................................. 8

Contents Verification ........................................................................................................... 9

Camera Overview ............................................................................................................... 10

Installing Auto Iris Lens ..................................................................................................... 11

OSD Menu Tables (1) .......................................................................................................... 12

OSD Menu Tables (2) .......................................................................................................... 13

OSD Menu Controls & Navigation ..................................................................................... 14

OSD Menu Terms & Settings ............................................................................................. 15

1. LENS ........................................................................................................................... 15

2. SHUTTER/AGC .......................................................................................................... 15

3. WHITE BAL (WHITE BALANCE CONTROL) .............................................................. 16

4. BACKLIGHT (BACKLIGHT COMPENSATION) .......................................................... 17

5. PICT ADJUST (PICTURE ADJUSTMENT) ................................................................. 17

6. ATR (ADAPTIVE TONE REPRODUCTION) ............................................................... 18

7. MOTION DET (MOTION DETECTION) ...................................................................... 18

8. PRIVACY (PRIVACY ZONE MASKING) ..................................................................... 19

9. DAY/NIGHT ................................................................................................................. 19

10. NR (NOISE REDUCTION) ........................................................................................ 20

11. CAMERA ID .............................................................................................................. 21

12. LANGUAGE .............................................................................................................. 21

13. CAMERA RESET ...................................................................................................... 21

14. BACK ........................................................................................................................ 21

15. EXIT .......................................................................................................................... 21

16. SAVE ALL ................................................................................................................. 21

MEMO .................................................................................................................................. 22

8

Contents Verification

Installation of the camera must be performed by qualified service personnel in accordance
with all local and national electrical and mechanical codes.

Before installing the camera, please make sure that all of the following items are included in
the box.

1. Fixed Camera

2. Mini-DIN connector (DC Auto Iris Lens)

3. CS adapter ring (C mounting “C” Lens)

4. Manual

9