Nutri Ninja BL490UK Instruction manual

OWNER’S GUIDE

BL490UK

®

www.ninjakitchen.eu

08 00 8 62 0453

2

®

www.ninjakitchen.eu

Welcome to the Nutri Ninja® with Auto-iQ® Pro Compact System all-purpose,
customisable, everyday kitchen assistant. The Nutri Ninja with Auto-iQ Pro
Compact System features pre-programmed settings that take the guesswork out of
drink and meal making. These programs are timed to deliver consistent, delicious
results that finish on their own so all you have to do is press a button and enjoy.

Select accessories are included. Additional accessories are available for
purchase at www.ninjakitchen.eu. For a list of what is included with this
model, refer to the top of the box or online.

If you should have a question about your Nutri Ninja with Auto-iQ Pro Compact System,
please call the Ninja Customer service line at 0800 862 0453.

THANK YOU!

REGISTER YOUR PURCHASE:

www.ninjakitchen.eu

0800 862 0453

RECORD THIS INFORMATION:

Model Number: ���������������������������������������������

Date of Purchase (Keep receipt):

����������������������������������������������������������

THIS BOOK COVERS MODEL NUMBER:

BL490UK 30

TECHNICAL SPECIFICATIONS:
Voltage: 220-240V~, 50/60Hz
Power: 1200W

Processor Bowl Capacity: 1.2 L

Nutri Ninja

®

Cup Capacity: 500ml

650ml

This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical and electronic equipment (WEEE).

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To
return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take
this product for environmental safe recycling.

This appliance complies with the European directives for electromagnetic compatibilit y (EMC) 2004/108/EC and its revisions, as well as Low Voltage
Directive (LVD) 2006/95/EC and its revisions.

Guarantee: This product is unconditionally guaranteed for one year against all defects of workmanship and materials. This guarantee does not affect your statutor y
rights. If this product proves unsatisfactory please contact our customer ser vice department on freephone 0800 862 0453 or by e-mail [e-mail].

3

®

08 00 862 04 53

IMPORTANT SAFEGUARDS

FOR HOUSEHOLD USE ONLY

READ ALL INSTRUCTIONS BEFORE USE

SAVE THESE INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be
observed, including the following:

IMPORTANT: This appliance is not intended for use by persons with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.

Children shall not use or play with this appliance. Close supervision is necessary
to keep appliance and cord out of reach of children during use.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1 WARNING: Extension cords are not recommended for use with this

product.

2

WARNING: Never leave the appliance unattended while in use.

3

CAUTION: ln order to avoid a hazard due to inadvertent resetting of

the thermal cut-out, this appliance must not be supplied through an
external switching device, such as a timer, or connected to a circuit
that is regularly switched on and off by the utility.

4

CAUTION: Blade assembly is sharp, handle with care. When handling the

blade assembly, always hold by the top of the blade assembly.

5

CAUTION: DO NOT BLEND HOT LIQUIDS. Allow hot ingredients to cool

beforeprocessing.

6

CAUTION: DO NOT process dry ingredients without adding liquid to the

cup. This product is not intended for dry blending.

7

CAUTION: Never attempt to remove the container (cup, processor bowls,

etc.) while the appliance is still running.

8 IMPORTANT: Never add ingredients to the containers (processor bowl, etc.)

before inserting the blade assembly first.

9 IMPORTANT: Do not attempt to operate the container (processor bowls, etc.)

without the lid on.
10 IMPORTANT: Never run the appliance empty.
11 IMPORTANT: Make sure that the motor base is plugged in for use.
12 IMPORTANT: Make sure that the motor base is unplugged when not in use.
13 To protect against electrical shock, do not submerge the appliance or allow the power

cord to come into contact with water or any other liquid.
14 DO NOT allow young children to operate the appliance or use as a toy. Close

supervision is necessary when any appliance is used by or near children.

15 Never leave the appliance unattended when in use.
16 Turn the appliance off and remove the power cord from the electrical outlet when not

in use, before assembling or disassembling parts, accessing parts that move while in

use and before cleaning. To unplug, grasp the plug and pull from the electrical outlet.

Never pull from the power cord.
17 DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it

to disconnect from the electrical outlet; to unplug, grasp the plug, not the cord.

18 DO NOT use with damaged cord or plug.

19 DO NOT USE if the appliance is not working, after it has been dropped, dropped into

water, damaged or left outdoors.

20 NO SERVICEABLE PARTS. Incorrect re-assembly or repair can cause a risk of electrical

shock or injury to persons when the appliance is used.

21 DO NOT let the power cord hang over the edge of a table or counter or touch hot

surfaces such as the stove.

22 Always use the appliance on a dry, level surface. Make sure the suction-cup feet are

wiped clean and no crumbs or residue are on the bottom of them.

23 Keep hands, hair, clothing, and utensils out of container while processing to reduce

the risk of severe injury to persons or damage to the appliance. A scraper may be used
ONLY when the appliance is not running.

24 Avoid contact with moving parts.
25 DO NOT attempt to sharpen blade assemblies.
26 DO NOT use the appliance if the blade assembly is bent or damaged.
27 To reduce risk of injury, never place the blade assembly on the motor base without the

proper container.

28 DO NOT operate this appliance on or near any hot surfaces (such as on a gas or

electric burner or in a heated oven).

29 The use of attachments or accessories (including canning jars), that are not

recommended or sold by the manufacturer may cause fire, electric shock, or personal
injury.

30 DO NOT remove the container (cup, processor bowl, etc.) from the motor base while

the appliance is running.

31 To reduce the risk of injury, NEVER operate the appliance without the blade assembly

installed in a container. DO NOT try to defeat the interlock mechanism; make sure the
blade is properly installed before operating the appliance.

32 DO NOT expose containers (cups, processor bowls, etc.) to extreme temperature

changes.

33 DO NOT overfill.
34 Max ON time is 60 seconds under 1200W load. If the appliance overheats, a thermal

switch will become activated and shut off the motor. To reset, unplug the appliance
and let it cool down for approximately 30 minutes before using again.

35 MAX Chop program run is 2 full runs (30 pulses). After 2 consecutive Chop program

runs allow 10 minutes to pass before running the Chop program again for up to an
additional further 2 consecutive runs (30 pulses).

36 To reduce the risk of burns, always allow the appliance to cool before taking off parts

and before cleaning.

37 To avoid injury, never attempt to place the Pro Extractor Blades

™

onto the motor base

without first assembling the blade assembly to the Nutri Ninja

®

Cup.

38 THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this appliance

for anything other than its intended use. Do not use outdoors.

39 Appliance accessories are NOT intended to be used in the microwave. DO NOT place

the container (cups, processor bowls, lids, etc.) in the microwave as it may result in
damage to the accessories.

40 The maximum power rating is based on the chopping blade (processor bowl) that

drives the greatest power; other recommended attachments may draw significantly
less power or current.

4

®

www.ninjakitchen.eu

ACCESSORIES

Select accessories are
included. Others are
available for purchase at
www.ninjakitchen.eu
or by calling
0800 862 0453.

1.2 L

Processor Bowl

Chopping Blade

(food processor)

Dough Blade

(food processor)

NOT E: Sip & Se al lid and Pro E xtr actor Blad es can be used w ith all N inja Cups .

Pro Extractor Blades

™

(2) Sip & Seal® Lids

WARNIN G: DO

NOT B LEND HO T

LIQUIDS

Nutri Ninja® Cups

500 ml 650 ml

5

®

08 00 862 04 53

†

Extract a drink containing vitamins and nutrients
from fruit s and vegetables.

FEATURES:

• Nutrient & Vitamin Extraction

†

• 1200 Watt Motor

• User Interface:

Start/Stop
Start /Stop is a manual setting that runs at High speed for 60 seconds. This button can be pressed at any time if you wish to stop a program.

Smooth Boost™

SMOOTH BOOST YES/NO is a special feature available when using the Auto-iQ® EXTRACT and Auto-iQ BLEND. This set ting can be used to control the consistency of your beverage

recipes. Select SMOOTH BOOST YES when smoother, creamier results are desired. This is the default program for both Auto-iQ EX TRACT and Auto-iQ BLEND programs. Select
SMOOTH BOOST NO when more of a textured consistency is desired.

Pulse

Offers greater control to help prevent over-processing or over-blending. Simply hold down the button and our blades will run at a high speed for a quick burst of power to break through

ice or chop vegetables.

Low

LOW is a manual setting that runs for 30 seconds and will automatically shut off. On this setting, blades rotate at a slower speed, allowing heavy recipes like doughs to be mixed.

AUTO-IQ EX TRACT†

EXTRACT should be used when blending hard, leafy, or fibrous whole fruits and vegetables, including apples, kale, and celery. This optimized program allows you to blend fresh items
with their skins, seeds, and stems into nutrient ex tractions. Before using EX TRACT, select Smooth Boost YES or NO depending on your desired consistency.

AUTO-IQ BLEND

BLEND can be used to make a range of beverages that do not include hard or fibrous fresh ingredients, such as milkshakes, protein smoothies, soft fresh-fruit smoothies, and frozen

cocktails. Before using BLEND, select SMOOTH BOOST YES or NO depending on your desired consistency.

AUTO-IQ CHOP

CHOP is a program composed of timed pulses and pauses to deliver consistent chopping results for a range of recipes including ingredient prep, salsas, and ground meat. When

ingredients have reached your desired consistency, stop by selecting AUTO-IQ CHOP or Start/Stop.

• Sip & Seal® lids for drinks on the go.

• Nutri Ninja® Cups and Sip & Seal lids, BPA free, and dishwashersafe.

• 1.2 L Food Processor Bowl & lid, are BPA free, and dishwasher safe.

• Cord Wrap located on back of the motor base.

Ice to Snow

Crushing Ice to Snow is easy – take ice cubes directly from your freezer, and put in a dr y Ninja® Cup – use the pulse feature in short quick bursts until it’s a snow like consistency.

6

®

www.ninjakitchen.eu

ASSEMBLY &
USE OF THE
NUTRI NINJA®
CUP

NOTE: Ninja® Auto-iQ®

Technology can sense
which container is on the
motor base. The function
lights will illuminate
depending on which
Nutri Ninja Cup is placed
on the motor base.

BEFORE FIRST USE:

• Remove all packaging material and labels from

the appliance.

• Wash the lids, cups, blades, and processor bowl

in warm, soapy water with a soft cloth.

• Rinse and dry thoroughly.

• Lids, cups, blades, and processor bowl are all
dishwasher safe. It is recommended that the
lids and at tachments be placed on the top
rack. Ensure that the Pro Extractor Blades™
are removed from the cups before placing in
thedishwasher.

• Wipe the motor base clean with a damp cloth.

ASSEMBLY:

WARNING: NEVER LE AVE T HE APPLIANCE

UNAT TENDED WHILE IN USE.

CAUTION: USE CAUTION WHEN HANDLING
THE BL ADE ASSEMBLY AS IT IS VERY SHA RP.

IMPORTANT: MAK E SURE THE MOTOR

BASE IS PLUGGED IN FOR USE.

1 Place the motor base on a clean, dry, level

surface such as a counter or tabletop. Press
down on the motor base to make sure the
suction cups adhere to the counter or tabletop.

2 Add ingredients to the Nutri Ninja cup.

3 Place the Pro Extractor Blades onto the cup and

tightly screw on clockwise (A) until you have a
good seal.

4 Turn the Nutri Ninja cup upside down and place

it onto the motor base (B), aligning the tabs on
the cup with the motor base. Rotate the Nutri
Ninja cup clockwise until it locks in place (you
will hear a click when the lock is engaged).

USE:

5 Once the cup is engaged, the programs available

for that attachment will illuminate. Select
the program (C) desired based on your recipe.
The Auto-iQ program will stop the appliance
automatically at the end of the program.

6 To pause the program, press the selected speed

or Auto-iQ Program a second time.

REMOVAL:

7 Once you have reached your desired

consistency, press the Power button to turn
the program of f. Turn the Nutri Ninja cup
anticlockwise (D) and pull straight up to remove
(E).

8 Turn the cup upright and remove the Pro

Extractor Blades by twisting the Pro Extractor
Blades anticlockwise.

9 Place the Sip & Seal® lid onto the Nutri Ninja

cup, twist to seal, and enjoy!

10 Make sure the appliance is unplugged when not

inuse.

11 To release the motor base from the counter or

tabletop, place your fingers under the sides of
the black paddles on the sides of the base and
lift up to release suction cup feet (F).

For best results, follow the recipe/ingredient loading instructions found in your Inspiration Guide.

CAUTION: DO NOT BLEND HOT LIQUIDS. AL LOW THE LIQUIDS OR FOODS TO COOL TO ROOM TEMPERATURE BEFORE BLENDING.

IMPORTANT: DO NOT OVERFILL. TO AVOID SPILLING, DO NOT ADD INGREDIEN TS PAST THE “MA X” FILL LINE.

USE REMOVALASSEMBLY

B C D E FA

7

®

08 00 862 04 53

ASSEMBLY

ASSEMBLY OF
THE PROCESSOR
BOWL

NOTE: Ninja® Auto-iQ®

Technology can sense
which jar is on the motor
base. The function lights
will illuminate depending
on which container is
placed on the motor base.

ASSEMBLY:

WARNING: NEVER LE AVE T HE APPLIANCE

UNAT TENDED WHILE IN USE.

CAUTION: USE CAUTION WHEN

HANDLING THE CHOPPING BL ADE AS IT
IS VERY SHARP.

IMPORTANT: MAK E SURE THE MOTOR

BASE IS PLUGGED IN FOR USE.

1 Holding the desired blade by the top of the

shaft, place it onto the drive gear

(A)

inside the
bowl. Ensure that the attachment is seated
properly and is standing upright.

NOTE: THE CHOPPING BL ADE WILL FIT

LOOSELY ON THE DRIV E GEAR.

2 Place the motor base on a clean, dry, level

surface such as a counter or tabletop. Press
down on the motor base to make sure that the
suction cups adhere to the counter or tabletop.

3 Align and lower the Processor Bowl

(B)

onto the

motor base. Handle should be aligned slightly to
the right of the LOCK symbol on the motor base.

4 Rotate the Processor Bowl clockwise (C) until

it locks in place (you will hear a click when the
lock is engaged).

5 The bowl can be placed on the motor base

two ways; the handle can be on the front right
corner

(D)

or the front lef t corner

(E)

.

6 Add the ingredients to the bowl, making sure

they do not exceed the highest measured
marking line on the side of the bowl.

7 Holding the lid by the handle in the upright

position

(F)

, place it on top of the bowl aligning
the triangle ( ) located on the lid with the
triangle ( ) located on the bowl handle. Press
the handle down until you hear a click.

8 The triangles on the lid and the Processor Bowl

handle (G) MUST be aligned for the blender to
turn on.

9 Plug the power cord into the electrical outlet.

The function lights will illuminate.

or

1.2 L PROCESSOR BOWL

A B C D E F

G

If your unit comes with this accessory, read the following instructions. For a list of what is included with this model, refer to inside flap of the box.

CAUTION: THE CHOPPING BLADE

IS NOT LOCKED IN PL ACE.
IF POURING WITH THE LID
REMOVED, ALWAYS REMOVE
THE CHOPPING BLADE FIRST.

CAUTION: CHOPPING BLADE IS

NOT LOCK ED IN PLACE. IF USING
THE POUR SPOUT, ENSURE THE
LID IS FULLY LOCKED ONTO THE
BLEND AND PREP BOWL.

IMPORTANT: DO NOT

OVERFILL. TO AVOID SPILLING,
DO NOT ADD INGREDIENTS
PAST THE “MAX” FILL LINE.

8

®

www.ninjakitchen.eu

USING THE
CHOPPING BLADE
& DOUGH BLADE

USING THE CHOPPING BLADE:

CAUTION: USE CAUTION WHEN

HANDLING THE CHOPPING BLADE AS THE
BLADES ARE VERY SHARP.

1 Holding the Chopping Blade assembly by the top

of the shaft (H), place it onto the gear shaft inside
the bowl. Ensure that the attachment fits around
the gear shaft and that it is standing straight.

2 Add the ingredients and secure the bowl lid

onto the bowl.

3 Plug the power cord into the electrical outlet.

Once the bowl is engaged, the programs
available for that attachment will illuminate.
Select the program desired based on your recipe.
The Auto-iQ

®

program will stop the appliance

automatically at the end of the program.

4 When you have reached your desired

consistency, stop the appliance by pressing the
START/STOP button or selecting the program
twice. Wait for the blade to stop turning.

REMOVAL:

5 To remove the lid, press the release button (I) on

the lid and pull the lid handle up to a 90° angle.

6 Turn the bowl anticlockwise and lift it to remove

it from the motor base (J).

7 Make sure that the motor base is unplugged

when not in use.

8 To release the motor base from the counter or

tabletop, place your fingers under the sides of
the black paddles on the sides of the base and
lift up to release suction cup feet (K).

USING THE DOUGH BLADE:

IMPORTANT: This makes 500g of dough at a time.

Do not overfill or exceed. Motor may overheat.

1 Holding the Dough Blade assembly by the top of

the shaft (L), place it onto the gear shaft inside
the bowl. Ensure that the attachment fits around
the gear shaft and that it is standing straight.

2 Add the ingredients and secure the bowl lid onto

the bowl.

3 Plug the power cord into the electrical outlet.

Press the START/STOP button to turn on the
unit. Once the bowl is engaged, the programs
available for that attachment will illuminate.
Select LOW on the control panel and process
until ingredients come together to form a mass.

4 Once finished making the dough, stop the appliance

by pressing the

START/STOP

button again or

selecting the program twice. Wait for the blade to
stop turning.

USE REMOVAL USE

Chopping blade Dough blade

H I J K L

If your unit comes with this accessory, read the following instructions. For a list of what is included with this model, refer to inside flap of the box.

CAUTION: THE CHOPPING BLADE

IS NOT LOCKED IN PL ACE.
IF POURING WITH THE LID
REMOVED, ALWAYS REMOVE
THE CHOPPING BLADE FIRST.

CAUTION: CHOPPING BLADE IS

NOT LOCK ED IN PLACE. IF USING
THE POUR SPOUT, ENSURE THE
LID IS FULLY LOCKED ONTO THE
BLEND AND PREP BOWL.

IMPORTANT: DO NOT

OVERFILL. TO AVOID SPILLING,
DO NOT ADD INGREDIENTS
PAST THE “MAX" FILL LINE.

9

®

08 00 862 04 53

CARE &
MAINTENANCE

CLEANING:

CAUTION: MAKE SURE THAT THE

MOTOR BASE IS UNPLUGGED FROM THE
POWER SOURCE BEFORE INSERTING
OR REMOVING ANY ATTACHMENT AND
BEFORE CLEANING.

CAUTION: DO NOT IMMERSE THE MOTOR

BASE INTO WATER OR ANY OTHER
LIQUID.

CAUTION: HANDLE BLADES CAREFULLY

AS THE BLADES ARE VERY SHA RP.

1 Separate/remove all parts from each other.

2 Clean the motor base with a damp cloth and

wipe dr y.

3 Place the cups, lids, blade assemblies, and bowl

in the top rack of the dishwasher.

OR

4 Carefully hand wash the cups, lids, blade

assemblies, and bowl in warm, soapy water
with a soft cloth.

NOTE: If the appliance needs servicing, please
call cus tomer service at 0 800 86 2 04 53.

STORING:

1 Store the Nutri Ninja with Auto-iQ® Pro

Compact System upright. Secure the power cord
on the back of the base by wrapping the cord
around the cord wrap. Do not place anything on
top of the unit. Store the cups and the rest of the
attachments where they will not be damaged
and won’t cause a hazard.

RESETTING THE MOTOR
THERMOSTAT:

The

Nutri Ninja with Auto-iQ Pro Compact System

features a safety system that prevents damage
to the unit’s motor and drive system should you
inadvertently overload the appliance. If the
appliance is overloaded, the motor will stop. To reset
the appliance, follow the resetting procedure below:

1 Unplug the appliance from the electrical outlet.

2 Remove and empty the cup/pitcher/bowl and

ensure that no food is jamming the cut ting
blades.

3 Allow the appliance to cool for approximately

30 minutes.

4 Re-install the cup/pitcher/bowl onto the

motor base and re-plug the appliance into the
electrical outlet.

5 Proceed with using the appliance as before

while making sure not to exceed the ma ximum
recommended capacities.

10

®

www.ninjakitchen.eu

Unit doesn’t turn on:

• Make sure the unit is plugged in and the START/STOP button is pressed.

• Insert and rotate cup clockwise in the base until it clicks into place. Display should turn on.

Unit doesn’t turn off:

• Remove cup from base by rotating cup anticlock wise and lifting out. Display should turn off. Unplug the power cord from the outlet.

Lid/blade assembly hard to assemble:

• Set the cup on a level surface. Place the lid or blade assembly on the top of the cup and align the threads so that the lid/blades sit flat on the cup. Twist clockwise so
that the lid/blades evenly align to the cup until you have a tight seal.

Food is not evenly chopped:

• For best results when chopping, make sure all ingredients are as dry as possible. Cut pieces down to even sizes, and reduce the amount of food in the cup. Use the
Auto-iQ® CHOP button for best results.

Doesn’t mix well, food gets stuck:

• Using the Auto-iQ programs is the easiest way to achieve great results. The pulses and pauses allow the food to settle towards the blade. If food is routinely getting
stuck adding some liquid will usually help.

• When packing the cups, start with fresh items, then add liquids, powders/dry ingredients, and finally frozen items or ice.

Unit moves on the counter while blending:

• Make sure the surface as well as the feet of the unit are clean and dry.

Unit is difficult to remove from the counter for storage:

• To release the motor base from the counter or tabletop, place your hands underneath both sides of the motor base and gently pull the unit up and towards you.

TROUBLE­SHOOTING
GUIDE

11

®

08 00 862 04 53

NOTES

The Euro-Pro, Sip & Seal, Auto-iQ, Nutri-Ninja and Ninja are registered trademarks of Euro-Pro Operating LLC.
Pro Extractor Blades is a trademark of Euro-Pro Operating LLC.

BL4 90UK �30 �IB�15 0616�1

© 2015 Eur o-Pro Op erating LL C

Illust rations may d iffer fro m actual pro duct. We are consta ntly striving to

impro ve our produ cts, there fore the spe cificatio ns containe d herein are

subject to change wit hout notice.

Printed in China

Euro-Pro Europe Limited

15 Mariner Court

Calder Park

Wakefield

WF4 3FL

Freephone 0800 862 04 53

www.ninkjakitchen.eu

www.ninjakitchen.eu

08 00 8 62 0453