Nutri Ninja BL488 User Manual

Download

Page 1

OWNER’S GUIDE

BL488ANZ

Page 2

READ ALL INSTRUCTIONS BEFORE USE

THANK YOU!

Welcome to the Nutri Ninja® with Auto-iQ™ Pro Complete all-purpose, customisable, everyday kitchen assistant. The Nutri Ninja with Auto-iQ Pro Complete features pre-programmed settings that take the guesswork out of drink and meal making. These programs are timed to deliver consistent, delicious results that ﬁnish on their own so all you have to do is press a button and enjoy.

AU: 01800 890 840

RECORD THIS INFORMATION:

Model Number: ��

Date of Purchase (Keep receipt):

��

THIS BOOK COVERS MODEL NUMBER:

BL488ANZ 30

NZ: 0800 002 999

If you should have a question about your Nutri Ninja with Auto-iQ Pro Complete, please call AU: 1800 890 840 or NZ: 0800 002 999.

TECHNICAL SPECIFICATIONS: Voltage: 220-240V~, 50/60Hz Power: 1100W

Ninja

Nutri Ninja® Cup Capacity: 650ml

Ninja® Double Wall Stainless Steel Cup Capacity:

Jar Capacity: 1.4 L

650ml

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using your Ninja® product. When using an electrical appliance, basic safety precautions should always be observed, including the following:

IMPORTANT: This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children shall not use or play with this appliance. Close supervision is necessary to keep appliance and cord out of reach of children during use.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: 1 WARNING: Remove utensils prior to processing. Failure to

remove may cause the jar to be damaged or to shatter which may cause personal injury.

2 CAUTION: Do not blend hot liquids, doing so may cause

excessive pressure build-up, resulting in risk of the user being burned.

3 CAUTION: We do not recommend grinding in any of our

Nutri Ninja® cups.

4 CAUTION: Remove the Pro Extractor Blades™ Assembly

from the Nutri Ninja cup or Nutri Ninja XL Multi-Serve Jar upon completion of blending. Do not store ingredients before or after blending them in the cup or jar with the blade assembly attached. Some foods may contain active ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup or jar, use Sip & Seal Lid® to cover.

5 WARNING: Extension cords are not recommended for use

with this product.

CAUTION: ln order to avoid a hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on

and off by the utility. 7 IMPORTANT: Attachments are not interchangeable. 8 IMPORTANT: Never run the appliance empty. 9 IMPORTANT: Make sure that the motor base is plugged in for use. 10 IMPORTANT: Make sure that the motor base is unplugged

when not in use. 11 To protect against electrical shock, do not submerge the appliance or

allow the power cord to come into contact with water or any other

liquid. 12 DO NOT allow the appliance to be used by children. Close attention is

necessary when used near children. This is not a toy.

13 Never leave the appliance unattended when in use. 14 Turn the appliance off and remove the power cord from the electrical

outlet when not in use, before assembling or disassembling parts,

accessing parts that move while in use, and before cleaning. To

unplug, grasp the plug and pull from the electrical outlet. Never pull

from the power cord. 15 DO NOT abuse the power cord. Never carry the appliance by the

power cord or yank it to disconnect from the electrical outlet; to

unplug, grasp the plug, not the cord.

16 DO NOT use with damaged cord or plug. 17 DO NOT USE if the appliance is not working, after it has been

dropped, dropped into water, damaged, or left outdoors. 18 NO SERVICEABLE PARTS. Incorrect re-assembly or repair can cause a

risk of electrical shock or injury to persons when the appliance is used. 19 DO NOT let the power cord hang over the edge of a table or counter

or touch hot surfaces such as the stove.

GMA-102233-EA-014

SAVE THESE INSTRUCTIONS

CUS TOMER CARE - N Z: 0 800 0 02 9 99

FOR HOUSEHOLD USE ONLY

CUS TOMER CARE - AU: 1800 8 90 8 40

Page 3

READ ALL INSTRUCTIONS BEFORE USE

IMPORTANT SAFETY INSTRUCTIONS

Nutri Ninja

Cups

Double Wall

Stainless Steel

Cup

Ninja

Nutri Ninja XL

Multi-Serve Jar

20 Always use the appliance on a dry, level surface. Make sure the

suction cup feet are wiped clean and no crumbs or residue are on the bottom of them.

21 Keep hands, hair, clothing, and utensils out of container while processing

to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used ONLY when the appliance is not running.

22 Avoid contact with moving parts. 23 DO NOT attempt to sharpen blade assemblies. 24 DO NOT use the appliance if the blade assembly is bent or damaged. 25 To reduce risk of injury, never place the blade assembly on the motor

base without the proper container.

26 DO NOT operate this appliance on or near any hot surfaces (such as

on a gas or electric burner or in a heated oven).

27 The use of attachments or accessories (including canning jars), that

are not recommended or sold by the manufacturer may cause ﬁre, electric shock, or personal injury.

28 DO NOT remove the container from the motor base while the

appliance is running.

29 To reduce the risk of injury, NEVER operate the appliance without

the blade assembly installed in a container. DO NOT try to defeat the interlock mechanism; make sure the blade assembly is properly installed before operating the appliance.

30 DO NOT expose containers to extreme temperature changes. 31 DO NOT overﬁll. Do not exceed "MAX" ﬁll line.

32 Max ON time is 60 seconds under 1100W load. If the appliance

overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 30 minutes before using again.

33 To reduce the risk of burns, always allow the appliance to cool before

taking off parts and before cleaning.

34 To avoid injury, never attempt to place the Pro Extractor Blades™

Assembly onto the motor base without ﬁrst assembling the blade assembly to the Nutri Ninja® Cup.

35 THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not

use this appliance for anything other than its intended use. Do not use outdoors.

36 Appliance accessories are NOT intended to be used in the

microwave. DO NOT place the containers (cups, processor bowls, lids, etc.) in the microwave as it may result in damage to the accessories.

37 The maximum power rating is based on the chopping blade

(processor bowl) that drives the greatest power; other recommended attachments may draw signiﬁcantly less power or current.

ACCESSORIES

Select accessories are included. Others are available for purchase.

650 ml

Sip &

™

Lid

Seal

NOT E: Sip & Se al lid and Pro E xtr actor Blad es Assem bly

can be us ed with al l Ninja Cup s.

Motor Base

Pro Extractor

™

Assembly

Blades

650 ml

1.4 L

START

PULSE

STOP

YES

BLEND

SMOOTH

EXTRACT

BOOST

SAVE THESE INSTRUCTIONS

CUS TOMER CARE - N Z: 0 800 0 02 9 99

CUS TOMER CARE - AU: 1800 8 90 8 40

Page 4

® ®

or or

START STOP

PULSE

SMOOTH

BOOST

YES

EXTRACT

BLEND

FEATURES:

• Nutrient & Vitamin Ex traction*

• 1100 Watt Motor

• User Interface:

START/STOP START/STOP is a manual set ting that runs at High speed for 60 seconds. This button can be pressed at any time if you wish to stop a program.

SMOOTH BOOST™

SMOOTH BOOST YES/ NO is a special feature available when using the Auto-iQ™ EXTRACT and Auto-iQ BLEND. This set ting can be used to control the consistency of your beverage

recipes. Selec t SMOOTH BOOST YES when smoother, creamier results are desired. This is the default program for both Auto-iQ EX TRACT and Auto-iQ BLEND programs. Select SMOOT H BOOST NO when more of a textured consistenc y is desired.

PULSE

Offers greater control to help prevent over-processing or over-blending. Simply hold down the but ton and our blades will run at a high speed for a quick burst of power to break through

ice or chop vegetables.

AUTO-IQ EX TRACT*

EXTRACT should be used w hen blending hard, leafy, or ﬁbrous whole fruits and vegetables, including apples, kale, and celery. This optimized program allows you to blend fresh items with their skins, seeds, and stems into nutrient ex tractions. Before using EX TRACT, select SMOOTH BOOST YES or NO depending on your desired consistency.

AUTO-IQ BLEND

BLEND can be used to make a range of beverages that do not include hard or ﬁbrous fresh ingredients, such as milkshakes, protein smoothies, soft fresh-fruit smoothies, and frozen

cocktails. Before using BLEND, select SMOOTH BOOST YES or NO depending on your desired consistency.

• Sip & Seal™ lids for drinks on the go.

• Nutri Ninja® Cups and Sip & Seal lids, BPA Free, and dishwashersafe.

NOTE: The Stainless Steel Ninja® Cup is NOT dishwasher safe.

• Cord Wr ap located on back of the motor base.

Ice to Snow

Crushing Ice to Snow is easy – take ice cubes directly from your freezer, and put in a dr y Ninja® Cup – use the pulse feature in short quick bursts until it’s a snow like consistency.

ASSEMBLY AND USE FOR THE NUTRI NINJA® CUP OR JAR

ﬁg. 6

START

PULSE

STOP

YES

BLEND

SMOOTH

EXTRACT

BOOST

ﬁg. 2 ﬁg. 3 ﬁg. 4 ﬁg. 5

For best results, follow the recipe/ingredient loading instructions found in your Inspiration Guide.

WARNING: Handle the Pro Extractor Blades™ Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned.

CAUTION: Remove the Pro Extractor Blades™ Assembly from the Nutri Ninja cup or Nutri Ninja XL Multi-Serve Jar upon completion of blending. Do not store ingredients before or after blending them in the cup or jar with the blade assembly attached. Some foods may contain active ingredients or release gases that will expand if lef t in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup or jar, use Sip & Seal Lid® to cover.

START

PULSE

STOP

YES

BLEND

SMOOTH

EXTRACT

BOOST

START

PULSE

STOP

YES

BLEND

SMOOTH

EXTRACT

BOOST

START

PULSE

STOP

YES

BLEND

SMOOTH

EXTRACT

BOOST

START STOP

PULSE

YES

SMOOTH

EXTRACT

BLEND

BOOST

ﬁg. 7ﬁg. 1

USE REMOVALASSEMBLY

NOTE: Ninja® Auto-iQ™ Technology can sense which jar is on the motor base. The func tion lights will illuminate depending on which container is

placed on the motor base.

* Extract a nutritious drink containing vitamins and nutrients from fruits and vegetables.

6 7

IMPORTANT: When processing sof t

dry ingredients such as day-old bread or cheese use quick, short 1 second pulses. Do not overﬁll to avoid overheating the appliance. Allow the appliance to cool after each use.

1 Review warning and caution statements

above before proceeding to number 2.

Place the motor base on a clean, dry, level surface such as a counter or tabletop. Press down on the motor base to make sure that the suction cups adhere to the counter or tabletop.

3 Add ingredients to the Nutri Ninja cup.

NOTE: Do not overﬁll! To avoid spilling, do

not add ingredients past the “MAX” ﬁll line.

4 Place the Pro Extractor Blades Assembly

onto the cup and tightly screw it on clockwise until you have a good seal. (Fig. 1)

Turn the Nutri Ninja cup upside down and place it onto the motor base, aligning the tabs on the

CUS TOMER CARE - AU: 1800 8 90 8 40CUS TOMER CARE - N Z: 0 800 0 02 9 99

cup with the motor base. Rotate the Nutri Ninja cup clock wise until it locks in place, you will hear a click when the lock is engaged. (Fig. 2)

6 Once the cup is engaged, the programs

available for that at tachment will illuminate. Select the program desired based on your recipe. (Fig. 3)

7 To pause the appliance, press the selected

speed or Auto-iQ program a second time. When the program is paused, the light on the program button will ﬂash until you press it again to resume the rest of the program.

8 Once you have reached your desired

consistency, press the START/STOP button to turn the program off. Turn the Nutri Ninja cup anticlockwise (Fig. 4) and pull straight up to remove. (Fig. 5)

9 Turn the cup upright and remove the Pro

Extractor Blades Assembly by twisting the Pro Extractor Blades Assembly anticlockwise.

10 Do not store blended contents in the Nutri

Ninja cup or Nutri Ninja XL Multi-Serve Jar with the Pro Extractor Blades Assembly attached. (Fig. 6)

11 Place the Sip & Seal™ lid onto the Nutri

Ninja® cup, twist to seal and enjoy!

NOTE: Sip & Seal lid not intended for use

with the Nutri Ninja XL Multi-Serve Jar.

12 For storage in the cup, use Sip & Seal lid to

cover.

13 Make sure that the motor base is unplugged

when not in use.

To remove the motor base unit, tip the unit forward from the rear to easily disengage the suction cups.

Be sure to store the Pro Extractor Blades

(Fig. 7)

Assembly attached to an empt y cup when not in use.

Page 5

® ®

CARE & MAINTENANCE

CLEANING:

CAUTION: Make sure that the motor

base is unplugged from the power source before inserting or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor

base into water or any other liquid.

Separate/remove all parts from each other.

Hand Washing: Wash the containers, lids,

blade assemblies and attachments in warm, soapy water. When washing the blade assemblies, use a dish-washing utensil with a handle to avoid direct hand contact with blades. Handle blade assemblies with care to avoid contact with sharp edges. Rinse and air dry thoroughly.

Dishwasher: The containers, lids, blade

assemblies and attachments are all dishwasher safe. The lids and blade assemblies are top rack dishwasher safe. Ensure that the Blade Assemblies are removed from the containers before placing in the dishwasher.

WARNING: Handle the Blade

Assemblies with care when washing, as the blades are sharp. Contact with the blades’ edges can result in laceration.

Wipe the motor base clean with a damp

cloth.

NOTE: If the appliance needs servicing, please call Customer care at: AUS T: 1800 890 840 or NZ: 0800 002 999.

STORING:

1 Store the Nutri Ninja with Auto-iQ™ Pro

Complete

upright with the blade assembly inside the corresponding container with the lid secured on top. Do not place anything on top. Store the rest of the attachments in a safe place where they will not be damaged and won’t cause harm.

on the back of the base by wrapping the cord around the cord wrap.

NOTE:

Do not store blended or unblended ingredients in the Nutri Ninja cup or Nutri Ninja XL Multi-Ser ve Jar with the blade assembly attached.

Secure the power cord

RESETTING THE MOTOR THERMOSTAT:

The

Nutri Ninja with Auto-iQ Pro Complete a safety system that prevents damage to the unit’s motor and drive system should you inadvertently overload the appliance. If the appliance is overloaded, the motor will stop. To reset the appliance, follow the resetting procedure below:

1 Unplug the appliance from the electrical outlet.

2 Remove and empty the cup and ensure that no

food is jamming the cutting blades.

3 Allow the appliance to cool for approximately

30 minutes.

4 Re-install the cup onto the motor base and re-

plug the appliance into the electrical outlet.

5 Proceed with using the appliance as before

while making sure not to exceed the ma ximum recommended capacities.

features

TROUBLESHOOTING GUIDE

Unit doesn’t turn on:

• Make sure the unit is plugged in and the START/STOP button is pressed.

• Insert and rotate cup clockwise in the base until it clicks into place. When the unit is plugged in and no jar installed, "--" is displayed on the timer.

Unit doesn’t turn off:

• Remove cup from base by rotating cup anticlockwise and lifting out. Display should turn off. Unplug the power cord from the outlet.

Lid/blade assembly hard to assemble:

• Set the cup on a level surface. Place the lid or blade assembly on the top of the cup and align the threads so that the lid/blades sit ﬂat on the cup. Twist clockwise so that the lid/blades evenly align to the cup until you have a tight seal.

Doesn’t mix well, food gets stuck:

• Using the Auto-iQ programs is the easiest way to achieve great results. The pulses and pauses allow the food to settle towards the blade. If food is routinely getting stuck adding some liquid will usually help.

• When packing the cups, start with fresh items, then add liquids, powders/dry ingredients, and ﬁnally frozen items or ice.

Unit moves on the counter while blending:

• Make sure the surface as well as the feet of the unit are clean and dry.

Unit is difﬁcult to remove from the counter for storage:

• To remove the motor base unit, tip the unit forward from the rear to easily disengage the suction cups.

8 9

CUS TOMER CARE - AU: 1800 8 90 8 40CUS TOMER CARE - N Z: 0 800 0 02 9 99

Page 6

® ®

NOTES

ONE (1) YEAR LIMITED REPLACEMENT WARRANTY STATEMENT

If your product becomes defective due to faulty material or workmanship within a period of 1 year from the date of purchase, we warrant to do the following:

• For New Zealand Consumers: We will replace the product with a new product, free of charge, or repair the product at our cost, at our discretion.

• For Australian Consumers: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and

for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Your warranty is subject to the following conditions:

• DO NOT operate the appliance with a damaged plug or cord, or if the unit has been dropped, damaged or dropped in water. To avoid the risk of electric shock, do not disassemble or attempt to repair the appliance on your own. If the supply cord is damaged, it must be replaced by a qualiﬁed electrician in order to avoid a hazard. Incorrect re-assembly or repair can cause a risk of electrical shock or injury to persons when the appliance is used.

• The product has not been misused, abused, neglected, altered, modiﬁed or repaired by anyone.

• The product has been subjected to fair wear and tear.

• The product has not been used for trade, professional or hire purposes.

• The product has not sustained damage through foreign objects, substances or accident.

Your warranty does not cover:

• Components that are subject to natural wear and tear caused by normal use in accordance with operating instructions.

• Unauthorised/improper maintenance/handling or overload is excluded from this warranty.

• For guarantee claims you will need to submit a proof of purchase in the form of a valid receipt that displays date and place of purchase.

This warranty does not replace but is in addition to your statutory rights.

This warranty does not apply to accessories supplied with the product.

This warranty applies only to the original purchaser and may not be transferred.

Replacement products will be covered by the limited warranty for the balance of the warranty period from the date of the original purchase.

Please note:

Only defective product or parts returned to place of purchase will be replaced under this warranty.

New Zealand Contact: Australia Contact

Brand Developers Limited Brand Developers Aust Pty Ltd

Unit H, 686 Rosebank Road, Unit 3, 2 Roussos Place,

Avondale, 1026 Auckland, NEW ZEALAND Truganiana VIC 3029, AUSTRALIA

NZ Customer Care: 0800 002 999 AUST Customer Care: 1800 890 840

10 11

CUS TOMER CARE - N Z: 0 800 0 02 9 99

CUS TOMER CARE - AU: 1800 8 90 8 40

Page 7

Exclusively Distribute Th

Brand Developers Aust Pty Lt

Unit 3, 2 Roussos Place, Truganina, VIC 3029, AUSTRALIA

Brand Developers Limite

Unit H, 686 R Av

NZ Customer Care: 0800 002 999

BL488ANZ�30�160630�1

roughout Australasia by:

ST Customer Care: 1800 890 840

ondale, 1026 Auckland, NEW ZEALAND

Illust rations may d iffer fro m actual pro duct. We are c onstantl y striving t o

impro ve our produ cts, there fore the spe ciﬁcatio ns containe d herein are

osebank Road,

GMA-102233-EA-014

subjec t to change wi thout noti ce.

Printed in China

Ninja and N utri-Ninj a are registe red tradem arks of Shar kNinja Oper ating

Auto -iQ, Pro E xtract or Blades and Sip & S eal are trad emarks of

LLC.

SharkNinja Operating LLC.

Nutri Ninja BL488 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual