NutriChef NCIT1S Users manual

Page 1
NCIT1S
Portable Single Burner Induction Cooktop
Electronic Plug-in Flameless Burner Design
with Digital Display and Warmer Hot Plate,
Auto Shut Off Function
Page 2
Please read all the instructions carefully before using the appliance
Table of Contents
Induction Technology
Parts Identication
Operation
Selection of Cookware
Maintenance
Troubleshooting
Technical Specications
2
3
4
4
5
5
6
7
Safety and Warranty
1. Do not place the unit near re or gas or any hot environment in order to avoid damages or malfunction.
2. To reduce the risk and damage, the plug should be t into an individual outlet and the rated electrical current should be not less than 16A.
3. Place the unit on a level and dry surface. Ensure there is a minimum free area of at least 10cm surrounding the unit on all sides.
4. Do not immerse the appliance or electric cord in water or any other liquid.
5. Do not allow any liquid to enter the unit’s cabinet. This will damage the inner electrical parts.
6. Ensure the power code is removed from the power socket before cleaning.
7. Do not cover the air vent with anything during cooking.
8. Before heating any tinned food please uncap its cover.
9. Do not place any metallic accessories like spoon, ladles etc on the cooktop while cooking in order to avoid heating. It is advisable to keep even non-metallic objects at least 10cm away from the unit while it is in use.
10. Do not cook with an empty pot. It may cause malfunction or pose danger.
11. If power cord gets damaged, please ensure you replace it only with a manufacturer recommended cord.
12. If the unit is not working for some reason even after basic troubleshooting by you, please immediately contact with our service points. Do not attempt to open the unit by yourself as it may be dangerous.
www.NutriChefKitchen.com
2
Page 3
13. Always clean the unit to avoid dirt going into the fan. This will aect its normal functioning.
14. Do not touch the plate while the unit is working, it may cause burns.
15. Users with cardiac pacemakers are advised to consult their doctors before using this product.
16. Do not place the unit on or near a gas stove.
17. Do not place any inammable item like paper, cloth or other such articles under the unit. It may cause a re hazard.
18. Do not place the unit on a cloth or carpet etc. This may block the air vent and be of danger to the unit and the user.
19. Avoid hitting the plate of the unit as it may crack or break the unit. In case you spot any cracks on the cooktop surface, turn o the unit and remove the cord from the electric outlet immediately and contact the service centers.
20. Do not touch the control panel with any sharp objects.
Induction Technology
When the power connection is ON, the electric current will produce a magnetic eld in the induction coil, which is embedded in the machine. As soon as the magnetic force lines in the magnetic eld touch the alloy steel pot/boiler, it will produce a heating eect, which then heats the good in the saucepan or pot.
Eddy current
Panel
Electric eld Coil produce electromagnetic
www.NutriChefKitchen.com
3
Page 4
Parts Identication
1. Black Crystal Plate
2. Heating Area
3. LED Screen
4. ON/OFF
5. Decrease Button
6. Increase Button
Operation
1. Basic Operation
•
Insert the plug into AC 120V~, 60Hz Socket
•
Place induction compatible cooking utensils in the center of the cooktop plate.
•
Press ON/OFF button to power the unit on. The LED screen displays “ON”, then press “+” or “-” . The default temperature 300°F will auto select, dierent Level, setting and adjustments
•
To power o the unit, press the ON/OFF button again.
•
Remove the plug from the socket if the unit is not going to be used for a long time.
2. Cooking Mode
Cooking Mode
•
There is 1 cooking mode: Temperature
Temperature
•
Press the [+] or [-] button, the display will show the default temperature of 300°F
•
The temperature can be adjusted by the [+] and [-] buttons through the range of 140°F, 210°F, 260°F, 300°F, 350°F, 390°F, 430°F, 460°F.
www.NutriChefKitchen.com
4
Page 5
•
Once cooking is nished, press the [ON/OFF] button to turn o the induction cooker.
•
The induction cooker will turn o automatically after 2 hours if no other function button is pressed.
Selection of Cookware
1. Material Required: Please use only induction compatible cookware made of steel, cast iron, enameled iron, stainless steel, at-bottom pans/pots with diameter from 12 to 26cm
2. Pans/Pots/Utensils should have a at surface. Do not try to use any other kind of utensils or vessels (especially pressure sensor vessels)
3. While buying your cookware, look for an “Induction Compatible” sign or wording to ensure it will work with this cooktop.
Maintenance and Daily Care
1. Keep the unit clean at all times. Avoid dirt getting into the fan or other inner parts of the Unit.
2. Before starting to clean the Unit, ensure the Unit is powered o and remove the power plug from socket. Do not clean the Unit until the surface cools down.
3. Remove grease, dirt, stains etc by cleaning the Unit with a clean soft cloth and mild detergent.
4. The fan in the air vent of the Unit is bound to get dirt stuck on it. Please remove it regularly with a soft brush or cotton stick.
5. Do not immerse the Unit or power cord directly into water or any other liquid to clean it. It will damage the Unit. To protect the Unit from any kind of power surge, ensure the plug is t properly into the socket.
6. Do not pull out the power cord directly during operation. To extend the appliance’s life, press the “ON/OFF” button rst, then unplug the power cord from the socket.
7. The fan will run to cool the heating plate even after the Unit is powered o. It is better to remove the plug after the fan stops working.
8. When not using the Unit for a long time, remove the plug from the socket.
9. Some models will have structural design to prevent cockroaches from entering inside the Unit. If needed, you can use mothball or equivalent cockroach repellent to protect the Unit.
www.NutriChefKitchen.com
5
Page 6
Troubleshooting and Treatment
During operations, if there is any error, please check the following table for common troubleshooting options before calling for service. Below are common errors and the checks to perform
ERROR SCENARIO CHECK POINTS REMEDY
Use after resuming the electricity
Check the root cause carefully. If the problem can’t be xed, please contact service center for checking and repairs.
Place cookware. Check if the cookware is induction compatible.
Place the cookware at the center of dened heating zone
Use cookware with diameter within 12-26cm
Please check whether the appliance is being misused
Remove the dirt clogging the air intake/exhaust vent. Operate the appliance again after cooling down.
Reset cooking modes or use timer function
When showing error signal E0, E3, E5, please check whether the cookware is induction compatible or not? Or switch on the appliance again after it is cooled down naturally. When Show E1, E2, E4, E6, please contact service center for checking and repairs
After connecting the power and pressing the “Power” key, the appliance has no response
Induction Cooker sends out “Beep” Sound
No Operation during the heating being in use
Error codes occur E0
Error codes occur E1
Error codes occur E2
Error codes occur E3
Error codes occur E4
Error codes occur E5
Is there power supply in the outlet?
Is there plug connected rmly?
Is the fuse broken down?
Has a cookware been placed on the surface? Is the cookware induction compatible?
Is the cookware placed on the center of the heating zone?
Is the cookware bigger than 12cm?
Is the cookware empty or the temperature too high?
Is the air intake/exhaust vent clogged or dirt has accumulated
Is the cooker working over 2 hours without any external instruction?
Without Cookware or Incompatible cookware used
Low-Voltage
High-Voltage
Top plate Overheat
Top Plate Sensor Open Circuit
IGBT Overheat
Top Plate Sensor Short CircuitError codes occur E6
www.NutriChefKitchen.com
6
Page 7
FEATURES:
• Ceramic Tempered Glass Induction Cooktop
• Simple Electronic Plug-in Flameless Burner Design
• Circular Top Panel Heating Zones
• Congurable Temperature Zone Setting
• High-Powered Heating Elements
• Quickly Heats for Instant Food Prep
• Digital LCD Display Screens
• Sensor Touch Controls
• Stain-Resistant & Easy-to-Clean
• Compact & Space-Saving Style
• Energy Ecient: Low Power Consumption
• Safety Certied & Approved
• For Use with All of Your Steel Kitchen Cookware, Pots & Pans
WHAT’S IN THE BOX:
• Single Burner Induction Cooktop
TECHNICAL SPECS:
• Heating Element Power: 1500W
• Circular Heat Zone Diameter: 6.7’’ -inches
• Adjustable Temperature Controls: 140°F - 460°F (60°C – 237.8°C)
• Construction Materials: Top Body (ABS) + Bottom Body (PP)
• Tempered Ceramic Glass (Crystal Plate)
• Power Cord Length: 4.9’ ft
• Power: 120V
• Unit Size (L x W x H): 11.1’’ x 12.24’ x 2.83’’ –inches
This product can expose you to a chemical or group of chemicals, which may include “Cadmium” which is known in the state of California to cause cancer, birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.
www.NutriChefKitchen.com
7
Page 8
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Loading...