NutriBullet Select 1000 10-delig User manual

USER GUIDE & RECIPE

IMPORTANT SAFEGUARDS & CAUTIONARY INFORMATION

SAVE THESE INSTRUCTIONS

FOR YOUR SAFETY, CAREFULLY READ ALL INSTRUCTIONS BEFORE OPERATING YOUR NUTRIBULLET SELECT.

MEDICAL WARNING!

• IF YOU ARE TAKING ANY MEDICATION, ESPECIALLY CHOLESTEROLLOWERING MEDICATION, BLOOD THINNERS, BLOOD PRESSURE DRUGS, TRANQUILIZERS, OR ANTIDEPRESSANTS, PLEASE CHECK WITH YOUR DOCTOR BEFORE CONSUMING ANY OF THE NUTRIBLAST RECIPES.

• THE FOLLOWING LIST OF SEEDS AND PITS CONTAIN CHEMICALS THAT RELEASE CYANIDE INTO THE BODY WHEN INGESTED. DO NOT USE THE FOLLOWING SEEDS AND PITS IN THE NUTRIBULLET SELECT: APPLE SEEDS, APRICOT PITS, CHERRY PITS, PLUM PITS, PEACH PITS.

ELECTRICAL SAFETY

When using any electrical appliance, basic safety precautions should always be observed, including the following:

• CAUTION! TO AVOID RISK OF ELECTRIC SHOCK, NEVER IMMERSE THE CORD, PLUG, OR POWER BASE OF BLENDER IN WATER OR OTHER LIQUIDS.

• DO NOT USE THIS PRODUCT WITH ANY TYPE OF ADAPTER OR VOLTAGE CONVERTER DEVICE.

• USE OF ADAPTERS AND CONVERTERS IS CONSIDERED AN UNAUTHORIZED MODIFICATION OF THE PRODUCT AND AS SUCH WILL VOID THE WARRANTY. USE OF THIS PRODUCT IN LOCATIONS WITH DIFFERENT ELECTRICAL SPECIFICATIONS MAY RESULT IN DAMAGE TO THE PRODUCT.

• THE USE OF ATTACHMENTS, INCLUDING CANNING JARS, NOT RECOMMENDED OR SOLD BY MANUFACTURER MAY CAUSE FIRE, ELECTRIC SHOCK, OR INJURY AND WILL VOID THE WARRANTY.

• UNPLUG THE NUTRIBULLET SELECT AND MAKE SURE TO TURN THE POWER KNOB TO THE UPRIGHT OFF POSITION WHEN IT IS NOT IN USE. MAKE SURE THE POWER BASE IS UNPLUGGED BEFORE ASSEMBLING, DISASSEMBLING, ADDING ADDITIONAL PARTS, OR CLEANING.

• This appliance has important markings on the plug and is not

suitable for replacement. If damaged, please call Customer Service for a replacement.

• Do not pull, twist, or damage the power cord.

• Do not allow the cord to hang over the side of the counter or table.

• Do not allow cord to touch hot surfaces, including the stove.

• Periodically inspect the cord and plug for damage. Do not operate

any appliance with a damaged cord or plug. If the appliance malfunctions or is dropped or damaged in any manner, discontinue use and contact Customer Service for assistance in obtaining a replacement.

• To clean the inside of the power base, unplug the unit and wipe with

a sponge moistened with warm water.

•

THIS APPLIANCE CAN BE USED BY CHILDREN AGED 8 YEARS AND ABOVE AND BY PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN INSTRUCTION OR ARE SUPERVISED CONCERNING THE USE OF THE APPLIANCE IN A SAFE MANNER AND UNDERSTAND THE HAZARDS AND RISKS INVOLVED.

• IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY NUTRIBULLET, ITS SERVICE AGENT OR IN ORDER TO AVOID A HAZARD.

• TURN THE KNOB TO OFF TO POWER DOWN THE APPLIANCE AFTER

EACH USE. DISCONNECT FROM POWER SOURCE BEFORE CHANGING ACCESSORIES AND DO NOT ATTEMPT TO HANDLE UNTIL ALL PARTS HAVE STOPPED MOVING.

• THERE IS POTENTIAL FOR PERSONAL INJURY FROM MISUSE OF

THE NUTRIBULLET SELECT. TAKE CARE WHEN HANDLING THE SHARP CUTTING PRECISION EXTRACTOR BLADES AND EMPTYING THE PITCHER/CUP. UNPLUG THE UNIT AND USE CAUTION DURING CLEANING.

• THE NUTRIBULLET SELECT IS NOT A TOY, AND CHILDREN SHOULD NOT PLAY WITH IT.

WARNING: VENTILATION CAUTION

Always operate the NUTRIBULLET SELECT on a level surface, leaving unobstructed space beneath and around the power base to permit proper air circulation. Slots and openings on the bottom of the product are provided for ventilation to ensure reliable motor operation and to prevent over-heating. Warning: To prevent ﬁre hazard, power base openings should be free of dust or lint and never obstructed with ﬂammable materials such as newspapers, tablecloths, napkins, dishtowels, place mats or other similar type materials.

EXTRACTION SAFETY PRECAUTIONS

The NutriBullet Select has the following modes: Pulse, Blend, Crush and Variable Speed Mode, which are discussed in the "How It Works" section of this manual. Carefully read and follow all safety precautions, particularly when operating the NutriBullet Select in each of the aforementioned modes.

• NEVER LEAVE THE NUTRIBULLET SELECT UNATTENDED WHILE IN USE!

• CLOSE SUPERVISION IS NECESSARY WHEN ANY APPLIANCE IS

USED BY OR NEAR CHILDREN.

• NEVER USE THE PRECISION EXTRACTOR BLADE TO BLEND

WITHOUT LIQUID AS DOING SO MAY DAMAGE IT.

• NEVER PUT YOUR HANDS OR UTENSILS NEAR THE MOVING PRECISION EXTRACTOR BLADE AND NEVER USE YOUR HANDS OR UTENSILS TO PRESS THE ACTIVATOR BUTTONS DOWN WHILE THE NUTRIBULLET SELECT IS PLUGGED IN.

• THE PRECISION EXTRACTOR BLADE IS SHARP! HANDLE CAREFULLY. USE CARE WHILE HANDLING THE PRECISION EXTRACTOR BLADE. DO NOT TOUCH THE PRECISION EXTRACTOR BLADE EDGES TO AVOID INJURY.

• CHECK GASKET TO MAKE SURE IT IS COMPLETELY SEATED IN THE PRECISION EXTRACTOR BLADE UNIT BEFORE EACH USE. CONTACT CUSTOMER SERVICE FOR ASSISTANCE IF THE GASKET IS NOT COMPLETELY SEATED.

• WE RECOMMEND REPLACING YOUR PRECISION EXTRACTOR BLADE EVERY 6 MONTHS OR AS NEEDED FOR OPTIMAL PERFORMANCE. TO ORDER A REPLACEMENT PRECISION EXTRACTOR BLADE, SIMPLY VISIT: WWW.NUTRILIVING.COM

• THE NUTRIBULLET SELECT IS NOT INTENDED FOR USE IN

MICROWAVE OVENS. DO NOT PLACE THE NUTRIBULLET SELECT CUPS, POWER BASE OR ANY NUTRIBULLET SELECT ACCESSORY IN A MICROWAVE OVEN AS THIS MAY RESULT IN DAMAGE TO THE ACCESSORY. TO HEAT SOUPS AFTER BLENDING COOL OR ROOM TEMPERATURE INGREDIENTS, TRANSFER MIXTURE TO A MICROWAVE SAFE CONTAINER OR TO A STOVE-TOP POT PRIOR TO HEATING.

• NEVER MICROWAVE ANY UNVENTED, SEALED CONTAINERS

AS THEIR CONTENTS MAY EXPAND WITH HEAT PRESSURE AND EXPLODE, RESULTING IN POSSIBLE INJURY OR PROPERTY DAMAGE.

• NEVER BLEND CARBONATED INGREDIENTS OR LIQUIDS. BUILT-UP

PRESSURE FROM RELEASED GASES CAN CAUSE CONTAINER TO

BURST, RESULTING IN POSSIBLE INJURY.

• DO NOT PUT HOT INGREDIENTS IN ANY OF THE BLENDING VESSELS

BEFORE BLENDING. THE HEAT FROM THE INGREDIENTS CAN CAUSE PRESSURE TO BUILD IN THE SEALED VESSEL CAUSING POSSIBLE EXPULSION OF THE INGREDIENTS AND CAUSING PERSONAL INJURY

• OR PROPERTY DAMAGES. START WITH COOL OR ROOM

TEMPERATURE INGREDIENTS. (21ºC/70ºF OR LESS).

• DO NOT PUT HOT INGREDIENTS INTO THE BLENDER PITCHER

CONTAINER. ALWAYS START WITH ROOM TEMPERATURE OR COOLER INGREDIENTS. THE BLENDER CONTAINER SHOULD ALWAYS BE USED WITH THE VENTED LID. TO HEAT SOUPS AFTER BLENDING COOL OR ROOM TEMPERATURE INGREDIENTS,TRANSFER MIXTURE TO A MICROWAVE SAFE CONTAINER OR A STOVE-TOP POT PRIOR TO HEATING. DO NOT RUN THE NUTRIBULLET SELECT WITH EMPTY CUPS OR AN EMPTY PITCHER AS THIS CAN DAMAGE THE UNIT.

• AFTER BLENDING INGREDIENTS, ALLOW THE CONTENTS TO

SETTLE AND RELEASE ANY PRESSURE THAT MAY HAVE BUILT UP DURING THE EXTRACTION PROCESS. ALWAYS UNSCREW THE PRECISION EXTRACTOR BLADE ASSEMBLY FROM THE VESSEL SLOWLY AND POINTED AWAY FROM YOU IN CASE THERE IS ANY BUILT UP PRESSURE.

• IF YOU WILL NOT CONSUME YOUR BLAST / SOUP IMMEDIATELY,

USE THE STAY FRESH LID TO CLOSE THE CONTAINER. REMEMBER TO UNSCREW THE LID AND RELEASE PRESSURE PERIODICALLY AS THIS WILL RELEASE ANY ADDED PRESSURE THAT MAY HAVE BUILT UP DUE TO FERMENTATION. THE SUGARS IN THE FRUIT AND VEGETABLES CAN FERMENT, CAUSING PRESSURE TO BUILD UP AND EXPAND IN THE VESSEL, WHICH CAN CAUSE INGREDIENTS TO BURST AND SPRAY OUT WHEN MOVED OR OPENED.

• NEVER PERMIT ANY BLENDED MIXTURE TO SIT INSIDE A SEALED

CUP WITH A PRECISION EXTRACTOR BLADE WITHOUT FIRST RELEASING THE PRESSURE. BY UNSCREWING THE LID AND OPENING THE CUP FOR A FEW MOMENTS, THE PRESSURE WILL

DISSIPATE. DO NOT USE THE PITCHER ON THE MOTOR BASE WITHOUT THE BLACK LID AND CLEAR VENT TOP IN PLACE WHEN RUNNING THE NUTRIBULLET SELECT.

WARNING! POTENTIAL OF PERSONAL INJURY FROM MISUSE.

TAKE CARE WHEN HANDLING THE SHARP CUTTING BLADES,

EMPTYING THE PITCHER AND DURING CLEANING.

• Avoid contact with moving parts.

• NEVER STORE THE PRECISION EXTRACTOR BLADE ON THE POWER

BASE! NEVER LEAVE THE PRECISION EXTRACTOR BLADE ON THE POWER BASE WITHOUT A CUP OR VESSEL ATTACHED.

• Keep hands and utensils away from the precision extractor blade while chopping or blending food to reduce the risk of severe personal injury or damage to the device. A scraper may be used, but only when the blender/food chopper is not running and is unplugged.

• Do not use the precision extractor blade for grinding dry materials

such as grains, cereal, or coffee.

• Do not use the NutriBullet Select outdoors or in inclement weather.

• NEVER blend hot liquids.

SAFETY WARNINGS: EXTRACTING FOR NUTRIBLASTS

• THE NUTRIBULLET SELECT IS PROGRAMMED TO RUN FOR 1 MINUTE

IN EACH SELECTED MODE.

• IF THE POWER DOES NOT SHUT OFF AFTER 1 MINUTE DURING ANY

SELECTED MODE, STOP IT MANUALLY BY TURNING THE KNOB TO OFF OR SIMPLY TWIST THE VESSEL TO THE RIGHT AND LIFT CUP OFF POWER BASE.

• TO TURN OFF THE MACHINE AT ANY TIME DURING THE CYCLE (G

BUTTON WILL BE GREEN), TURN THE POWER KNOB TO THE UPRIGHT OFF POSITION OR SIMPLY PUSH DOWN ON THE CUP AND TWIST TO THE RIGHT AND LIFT THE CUP OFF THE POWER BASE, WHICH WILL TURN OFF THE UNIT. THE LIGHT WILL STOP GLOWING, AND THE MOTOR WILL STOP, SIGNIFYING THAT THE POWER IS

OFF. ALWAYS ALLOW THE MOTOR TO STOP COMPLETELY BEFORE REMOVING THE CUP/ PRECISION EXTRACTOR BLADE. ALWAYS UNPLUG THE POWER BASE UPON COMPLETION OF USE.

• DO NOT TOUCH COUPLING GEAR DIRECTLY WITH HANDS AFTER USE!

THE COUPLING GEAR IN PRECISION EXTRACTOR BLADE BASE AND POWER BASE WILL BE HOT!

• DO NOT RUN IN ANY MODE FOR MORE THAN 1 MINUTE INTERVALS.

• AFTER INITIAL CYCLE, ALLOW POWER BASE TO SHUT OFF

COMPLETELY AND WAIT FOR 15 SECONDS BEFORE STARTING ANOTHER CYCLE.

• DO NOT RUN FOR MORE THAN 3 CONSECUTIVE 1 MINUTE INTERVALS

WITHOUT ALLOWING THE POWER BASE TO COOL TO PREVENT OVERHEATING AND ALLOW INGREDIENTS TO SETTLE FOR 2-3 MINUTES AFTER THE 3RD EXTRACTION CYCLE.

• POWER BASE IS EQUIPPED WITH AN INTERNAL THERMAL BREAKER

THAT SHUTS OFF THE POWER BASE IF THE UNIT OVERHEATS.

• IF THE POWER BASE OVERHEATS AND SHUTS OFF, UNPLUG THE

POWER BASE AND LET IT COOL FOR AN HOUR OR MORE BEFORE ATTEMPTING TO USE IT AGAIN. POWER BASE WILL RESET WHEN THE UNIT IS POWERED OFF AND THE THERMAL BREAKER HAS COOLED DOWN SUFFICIENTLY.

• ALLOW MACHINE TO COOL DOWN FOR 10 MIN AFTER 4-5 CYCLES TO

PREVENT OVERHEATING AND DAMAGING THE UNIT.

• To prevent leakage, always align and hand-tighten the precision extractor blade to the vessel or cup prior to inverting it and placing the assembly on to the motor base.

• TO TURN ON THE NUTRIBULLET SELECT: Choose the desired Mode

by turning the dial to align with the desired mode as indicated on the NutriBullet Select Power Base. Press the center button. The light will glow GREEN and the motor will cycle up.

• In Pulse Mode, push and release until you achieve the desired

consistency. For Blend and Crush Modes, once you push the button it will continuously glow GREEN while it performs the pre- programmed function. After 1 minute, the light will glow RED and the motor will power down automatically.

• Note: In the Pulse Mode, the motor will run for a maximum of one

minute while pressing the G-button. After one minute, to reset it to pulse again, simply rotate the knob back to the OFF position to reset and then back to the Pulse mode. Always turn the dial so that the pointer is in pointing to OFF and unplug the unit when processing is ﬁnished.

• Once activated, the unit will run for 1 minute in Blend, Crush and Variable modes before it automatically turns off. The G-button will stop glowing green at the end of the 1-minute cycle. To turn off completely before the cycle is complete, rotate the knob to the upright OFF position. The light on the G-button will no longer be lit, signifying the power is off.

• In Crush Mode, the unit will turn on and off several times and run

for a total of 75 seconds then stop. To reset, rotate the knob to the OFF position to reset and then back to crush mode. This is a normal function of the NutriBullet Select.

• Turn the NutriBullet Select off after each use by rotating the G-button

knob to the upright OFF position. The GREEN light will stop glowing, signifying power is off.

PITCHER INSTRUCTIONS

• Always attach the precision extractor blade to Pitcher and hand tighten it to prevent leakage prior to adding ingredients into the pitcher.

• NEVER USE THE PRECISION EXTRACTOR BLADE TO BLEND

WITHOUT LIQUID AS DOING SO MAY DAMAGE THE BLADE.

• Do not use the pitcher on the motor base without the black lid and clear vent top in place when running the NutriBullet Select.

• Always allow the power base motor and precision extractor blade to come to a complete stop prior to adding additional ingredients during the processing period.

• WARNING! NEVER PUT YOUR HANDS IN THE PITCHER WHEN

ATTACHED TO THE POWER BASE AS DOING SO MAY CAUSE SERIOUS INJURY.

POWER OFF INSTRUCTIONS

• To turn off the machine at any time while running (indicated by the

GREEN glowing G-button), simply press the G-Button. The motor will stop. Then rotate the knob to the upright OFF position. Always make sure that the knob is in the upright OFF position and the unit is unplugged when the machine is not in use.

CLEANING SAFEGUARDS

• THE PRECISION EXTRACTOR BLADE MUST BE CLEANED IMMEDIATELY AFTER EACH USE.

• ALWAYS UNPLUG THE POWER BASE AND TURN THE G-BUTTON KNOB UPRIGHT TO THE OFF POSITION PRIOR TO CLEANING, ASSEMBLING OR DISASSEMBLING.

• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE DISHWASHER. WIPE OFF ANY DEBRIS INSIDE THE POWER BASE IMMEDIATELY WITH WARM WATER TO KEEP IT IN GOOD WORKING ORDER.

• DO NOT WASH THE PRECISION EXTRACTOR BLADE IN THE DISHWASHER AS

ELEVATED TEMPERATURES CAN DAMAGE GASKET SEALS.

• THE NUTRIBULLET SELECT CUPS AND PRECISION EXTRACTOR BL ADES SHOULD NOT BE IMMERSED IN BOILING WATER FOR ANY REASON AS THIS WILL WARP THE PLASTIC AND DAMAGE THE GASKETS.

• THE PRECISION EXTRACTOR BLADE IS SHARP! USE CARE WHEN CLEANING THE PRECISION EXTRACTOR BLADES TO AVOID INJURY! RINSE PRECISION EXTRACTOR BLADES IMMEDIATELY AFTER EACH USE TO PREVENT DEBRIS FROM DRYING AND STICKING TO IT. IF NECESSARY, USE A DISH BRUSH TO LOOSEN ANY DEBRIS AROUND BLADE, GASKETS AND BLADE HOUSING THREADS WITH CARE. DO NOT USE YOUR FINGERS.

• HAND WASH ONLY WITH MILD DISH SOAP AND WARM WATER (NOT HOT).

• ALLOW TO AIR DRY PRIOR TO PROPER STORAGE.

• FOR TOUGH DEBRIS, FILL THE CUP ½ FULL WITH ROOM TEMPERATURE

(NOT WARM OR HOT), MILD SOAPY WATER. THEN, SIMPLY TWIST ON THE PRECISION EXTRACTOR BLADE, POP IT ON THE BASE AND GIVE IT A RUN FOR 30-45 SECONDS. FOLLOW UP WITH A QUICK BRUSH.

• WHEN WASHING PRECISION EXTRACTOR BLADE, DO NOT ATTEMPT

TO REMOVE THE GASKET RING. SIMPLY HAND WASH THE PRECISION EXTRACTOR BLADE IN WARM, MILD SOAPY WATER. ATTEMPTED REMOVAL OF THE GASKET MAY PERMANENTLY DAMAGE THE PRECISION EXTRACTOR BLADE CONFIGURATION AND CAUSE LEAKAGE. IF IN TIME A GASKET BECOMES LOOSE OR DAMAGED, PLEASE CONTACT CUSTOMER SERVICE FOR A REPLACEMENT NUTRIBULLET SELECT PRECISION EXTRACTOR BLADE HOLDER AT: 1-877-528-7761.

STUBBORN CLEANUP

If ingredients dry inside the NutriBullet Select Cups or Pitcher, make your cleanup a snap by filling the cup about  full with room temperature soapy water (not warm or hot) and screw on the Precision Extractor Blade, and if using the Pitcher, put the lid on. Place the cup assembly on the NutriBullet

Select Power Base for about 20-30 seconds. This will loosen the stuck ingredients, and with a light scrub and rinse, you’ll be all done.

CLEANING THE NUTRIBULLET SELECT POWER BASE

For the most part, the Power Base doesn’t really get dirty, but if you neglect to twist the precision extractor blade on to the cup tightly, liquids can leak out and get into the base and stick to the activator buttons.

HERE’S HOW TO CLEAN IT UP:

Step 1: The most important thing — UNPLUG the Power Base before cleaning! Step 2: Use a damp rag to wipe down the inside and utside of the Power Base.

• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN

THE DISHWASHER.

• BLADES ARE SHARP! Never put your hands or utensils near the precision

extractor blade and never use your hands or utensils to press the activator buttons down while the Power Base is plugged in.

HEAVY CLEANING:

• Should the inside of the base become sticky due to spillage you may follow

these additional cleaning instructions:

• UNPLUG the Power Base and make sure the unit is o BEFORE cleaning.

• Place the Power Base on a dish towel to catch any liquid or debris.

• Pour a Tablespoon of a diluted solution of distilled vinegar and warm (not

hot) water (1 part vinegar to 2 parts water) in to the Power Base where the precision extractor blade assembly would sit during normal use.

• Immediately use a damp dish brush to dislodge any debris and wipe it out

with a damp cloth.

• The Power Base is constructed with a drain tube that will drain any

liquid debris safely through to the dish towel without damaging the inside components.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

PULSE BLEND

RPM

USER INSTRUCTIONS RECIPE USAGE

4,000 20,000

Rotate dial to the le to Pulse setting. Press and release the center button until the desired texture is achieved. Pulse will run for a maximum of one minute while holding the center button. Aer one minute, rotate back to "o" to reset.

For creating chunky textured foods. Salsa, diced tomatoes, minced garlic, onions, and dips.

Rotate dial to the le to Blend setting. Press center button. Blend will run for one minute. Aer one minute, unit will stop. Rotate back to "o" to reset.

For silky smooth consistencies like smoothies, soups and purees.

CRUSH

20,000 4,000-20,000

VARIABLE SPEED

Rotate dial to the le to Crush setting. Press center button. This is a SMART Technology Pre-Program. Unit will turn on and o several times and run for a total of 75 seconds then stop. Rotate back to "o" to reset.

For crushing ice, frozen fruit, nuts, seeds and more.

Rotate dial to the right to desired speed. Press center button and the unit will run for one minute. Change variable speed at any time during the one-minute cycle to achieve desired consistency. Aer one minute, unit will stop. Rotate back to "o" to reset.

This setting is for complete control of your own recipes. With Variable Speed control you decide how you blend your ingredients!

USER GUIDE

& RECIPE BOOK

TABLE OF

CONTENTS

18 WHY NUTRIBULLET

SELECT

20 WHAT YOU GET

26 USING THE

NUTRIBULLET SELECT

27 Icons

28 How It Works

30 OVERVIEW

33 RECIPES

34 Pulse

48 Blend

62 Crush

72 Variable Speeds

82 WARRANTY

WHY NUTRIBULLET SELECT?

Now you can enjoy all the power and ease of the original NutriBullet coupled with a whole new level of versatility and control. NutriBullet Select has the settings and variable speeds you need to have the perfect amount of control over your recipe output. With three useful settings: pulse, blend and crush, along with 5 variable speeds you get all the power, control and versatility of other high priced blenders, without the gigantic price tag and without giving up precious counter top space! Chunky salsas and chutneys, silky smooth smoothies, soups and dips, healthy fruit sorbets and tangy icees...are all made in seconds with the powerful, versatile NutriBullet Select.

/ WHAT YOU GET

THE POWER BASE

NutriBullet Select comes with a powerful 950-watt* power base with 3 preprogrammed settings and 5 variable speeds.

PULSE – Press the button as many times as you need to

achieve your desired consistency. This is the setting you use for chunkier recipes like salsas, chutneys and minces.

BLEND – Just push the button to get 60 seconds of

straight nutrient extraction power. Use this setting when you want your dish to turn out silky smooth.

CRUSH – Transform rock-hard ice into tasty treats with

the Crush setting. Simply select Crush and press the button. The NutriBullet Select hands-free technology takes over and crushes your hard ingredients to perfection.

VARIABLE SPEED SETTINGS – The variable speeds

run from setting 1 at 4,000 RPM, through setting 5 which goes up to 20,000 RPM. Low settings are great for whipping foods, then slowly move up to higher settings for foods such as cream cheese and sauces.

*The 950 watt rating of this appliance was obtained by using the 24oz Cup with Blade

Holder Assembly and 500g of Rice at max speed.

PULSE

You control the power with the Pulse setting. Make chunky salsas or creamy dips, and mince, chop and dice with ease.

BLEND

Precise 60-second Blend setting for smoothies, shakes, and creamy soups—anything you want to have a silky smooth consistency.

POWER SETTINGS:

CRUSH

Use the Crush setting for rock-hard foods like ice, frozen fruits, nuts, cinnamon sticks, etc.

VARIABLE SPEEDS

Use Variable Speeds for whipping foods by starting slow and increasing to high—for foods such as cream cheese, mayonnaise, sauces, etc.

PRECISION EXTRACTOR BLADE

Chop, blend and crush your ingredients to perfection with the state-of-the-art Precision Extractor Blade. Simply twist the Precision Extractor Blade onto the Pitcher or NutriBullet Select Cups and you are ready to start.

PITCHER WITH LID

The 28-ounce Pitcher is a perfect vessel for making multiple servings of your favorite drinks, smoothies and sauces. Plus, you can add ingredients as you blend. Just use the pop out lid. Simply twist on the Precision Extractor Blade, choose your favorite setting and give it a whirl!

COMFORT LIP RING

Attach this Lip Ring for comfortable, easy sipping.

SHORT CUP

When making smaller-sized recipes like dips, salsas, minced foods and chutneys, the 10-ounce Short Cup is the perfect vessel for the job. Simply twist on the Precision Extractor Blade, choose your favorite setting and either pulse or blend your ingredients to the exact consistency you desire.

COLOSSAL CUP

Enjoy a hefty serving of your favorite beverages, shakes, sauces and dips with the handy 24-ounce Colossal Cup. Simply twist on the Precision Extractor Blade, choose your favorite setting and enjoy your favorite recipe in just seconds!

FLIP-TOP LID

Take your masterpiece on the go with the handy Flip-Top Lid. Simply twist the lid onto your cup and you are ready to run out the door!

VESSEL GRIP

Attach this Vessel Grip for comfortable, easy handling.

RESEALABLE LID

Store your recipes and leftovers right in the cup! Just twist on the Resealable Lid and you have a perfect storage vessel.

NUTRIBULLET SELECT USER GUIDE & RECIPE BOOK

This book features nutritional information and recipes to inspire you on your journey to optimal health. Learn the ins and outs of your new NutriBullet Select including important safety precautions and care for safe, effective, long-term use.

/ SUPPORT TOOLS

NutriLiving.com has hundreds of Blast recipes, as well as informative articles and professional advice from a team of Registered Dietitians. At NutriLiving.com, you will also find amazing NutriBullet success stories and NutriBullet’s online store. When you register as a NutriLiving member, you will get 10% o all online orders, direct access to our dietitians, the ability to save recipes, take part in health assessments, and so much more!

NUTRIBULLET APP

Make the perfect NutriBlast smoothie every time! With hundreds of recipes featuring your favorite fruits and vegetables, our free recipes app will ensure you have every resource you need to achieve your personal health goals.

24/7 ACCESS TO NUTRILIVING.COM

PROFESSIONAL SUPPORT WHEN YOU NEED IT MOST.

Get answers to your health-related questions from our NutriBullet community and Registered Dietitians 24/7.

USING THE NUTRIBULLET SELECT

Each NutriBullet Select recipe comes with a suggested vessel and technique. Simply follow the directions provided and you are sure to create a recipe you’ll want to enjoy again and again.

THE FOLLOWING ICONS WILL APPEAR IN THE RECIPES:

Pitcher

Pulse

Colossal Cup

Blend

Short Cup

Crush

Speed 1 Speed 3Speed 2 Speed 4 Speed 5

If the recipe calls for using variable speed, please note how high to increase the speed as you are processing the ingredients. This will be called out in the recipe, so just follow the instructions and you are sure to get great results.

/ HOW IT WORKS

1 2 3

Fill ingredients into the Short

Cup, Tall Cup, or Pitcher.* Do

not exceed the MAX line. (Liquid is required!)

*Note: Add Precision Extractor Blade to the Pitcher before filling.

CAUTION: Friction from the rotating Precision Extractor Blade when extracting can cause ingredients to heat and generate internal pressure in the sealed vessel. If the vessel is warm to touch, allow to cool before carefully opening pointed away from your body.

Twist the Precision Extractor Blade onto the Cup or Pitcher* and tighten by hand to make sure the vessel is sealed. With Cup in place, the G-button will blink GREEN 3 times to show that the unit is powered on and

setting needs to

that a be selected.

Press the vessel Precision Extractor Blade-side down onto the Power Base and turn counter-clockwise to lock.

Turn the dial to select a setting.

Press the G-button to activate.**

PULSE – Turn the dial to “Pulse” then press the center of

the dial until you achieve the consistency you desire.

BLEND – Turn the dial to “Blend” then press the button

once. The hands-free blend cycle will start, run for 60 seconds, then stop.

CRUSH – Turn the dial to “Crush” then press the button

once. The hands-free crush cycle will start, run through its 75-second program, then stop.

VARIABLE SPEEDS – Start at number 1, then increase

the variable speed as needed for your particular recipe.

To heat, pour into an appropriate microwave safe container or stove top pot and heat to desired temperature.

+ 63 hidden pages