NutriBullet NBR-0507LG User Manual

CARE AND INSTRUCTIONS

THE SUPERFOOD NUTRITION EXTRACTOR

IMPORTANT SAFEGUARDS &
CAUTIONARY INFORMATION

FOR YOUR SAFETY, CAREFULLY READ ALL INSTRUCTIONS
BEFORE OPERATING YOUR NUTRIBULLET.

When using any electrical appliance, basic safety precautions should always be
observed, including the following:

PERSONAL SAFETY

• DO NOT PUT HOT LIQUIDS IN ANY OF THE BLENDING VESSELS BEFORE
BLENDING. Start with cool or room temperature ingredients. Heated
ingredients can create internal pressure in a sealed blending vessel, which
may erupt on opening and cause thermal injury.

• FRICTION FROM THE ROTATING BLADE CAN CAUSE INGREDIENTS TO HEAT
AND GENERATE INTERNAL PRESSURE IN THE SEALED VESSEL. Do not
continuously operate for more than one minute. If the vessel is warm to
touch, allow to cool before carefully opening pointed away from your body.

• NEVER PERMIT ANY BLENDED MIXTURE TO SIT INSIDE A SEALED VESSEL
WITHOUT FIRST RELEASING INTERNAL PRESSURE.

• NEVER INSERT BLADE INTO THE POWER BASE WITHOUT FIRST ATTACHING
THE CUP.

• REMOVE SPOON OR OTHER FOREIGN OBJECTS BEFORE BLENDING.

• NEVER LEAVE THE NUTRIBULLET UNATTENDED WHILE IT IS IN USE. CLOSE
SUPERVISION IS NECESSARY WHEN ANY APPLIANCE IS USED BY OR NEAR
CHILDREN.

• TO AVOID RISK OF ELECTRIC SHOCK, NEVER IMMERSE THE CORD, PLUG, OR
POWER BASE OF BLENDER IN WATER OR OTHER LIQUIDS.

• AT ALL TIMES, AVOID CONTACT WITH MOVING PARTS

• To reduce the risk of personal injury or damage to the device, keep hands and
utensils away from the cutting blade.

• To reduce the risk of injury and leakage, make sure the blade base is securely
screwed onto the cup before placing it on the Power Base and operating the
appliance.

• Blades are sharp. Handle carefully.

• The use of attachments not recommended or sold by the manufacturer may
cause fire, electric shock, or injury.

• Never remove cup/blade assembly from the Power Base until the motor
comes to a complete stop. Removing the cup/blade assembly while Power
Base is still running may cause damage the blade coupling or motor gear.

• Do not allow blended mixtures to sit for long periods in a sealed container.
The sugars in the fruit and vegetables can ferment, causing pressure to build
up and expand in the vessel which can cause ingredients to burst and spray
out when moved or opened.

• Never blend carbonated beverages. Built-up pressure from released gases
can cause container to burst, resulting in possible injury.

• If the NutriBullet malfunctions or is dropped, or damaged in any manner,
discontinue use and contact Customer Service for further assistance.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

32

PRODUCT SAFETY

• Check gasket to make sure it is completely seated in the blade unit before each
use. If seal damaged replace the unit online.

• If the motor stops for any reason, unplug the power base and let it cool for at
least an hour as this will reset the internal thermal breaker.

• Never use a NutriBullet with the blade to blend without liquid a doing so may
damage the blade.

• Do not run the NutriBullet when the cup is empty, this can damage the unit.

• The NutriBullet is not intended for use in microwave ovens. Do not place the
NutriBullet cups, power base or any accessories in a microwave as this may
result in damage to the appliance.

• Use of adapters and converters is considered an unauthorized modification of
the product and as such will void the warranty. Use of this product in locations
with dierent electrical specifications may result in damage to the product.

• Periodically inspect cord and plug for damage. Do not operate any appliance
with a damaged cord or plug.

• Do not pull, twist, or damage the power cord.

• Do not allow the cord to hang over the side of the counter or table.

• Do not allow cord to touch hot surfaces, including stove.

• The NutriBullet Power Base is made exclusively to work with the NutriBullet
Cups and Blades only and not other Bullet Branded Products such as the Magic
Bullet. Use with items not specifically manufactured for the NutriBullet will
void the Warranty.

• The cyclonic action of your NutriBullet requires the use of liquids to make
NutriBlasts and other nutritious beverages. The NutriBullet is not intended
to be used as an ice crusher, and not without liquids. To make a delicious
cold NutriBlast, we suggest that you use frozen fruit and chilled liquids.
Alternatively, you may add crushed ice, up to 25% of the total cup volume, with
water or other liquid filled up to the “MAX” line. Do not crush ice or other hard
items without liquid, as such prolonged use over time may dull or damage the
blades. Always inspect your blades before each use.

• Do not use NutriBullet outdoors. If exposed to inclement weather elements
such as rain or other wet conditions, discontinue use.

• Unplug the NutriBullet when it is not in use. Make sure the power base is unplugged
before assembling, disassembling, adding additional parts, or cleaning.

• To prevent overheating, never allow the motor to run for more than one
minute at a time, as this may cause damage to the motor as well as increase
the thermal pressure inside the cup which can cause personal injury.

WARNING: VENTILATION CAUTION

ALWAYS OPERATE THE NUTRIBULLET ON A LEVEL SURFACE, LEAVING
UNOBSTRUCTED SPACE BENEATH AND AROUND THE POWER BASE
TO PERMIT PROPER AIR CIRCULATION. SLOTS AND OPENINGS ON
THE BOTTOM OF THE PRODUCT ARE PROVIDED FOR VENTILATION
TO ENSURE RELIABLE MOTOR OPERATION AND TO PREVENT OVER­HEATING. WARNING: TO PREVENT FIRE HAZARD, POWER BASE
OPENINGS SHOULD BE FREE OF DUST OR LINT AND NEVER OBSTRUCTED
WITH FLAMMABLE MATERIALS SUCH AS NEWSPAPERS, TABLECLOTHS,
NAPKINS, DISHTOWELS, OR PLACE MATS.

WARNING!

• IF YOU ARE TAKING ANY MEDICATION, ESPECIALLY CHOLESTEROL­LOWERING MEDICATION, BLOOD THINNERS, BLOOD PRESSURE DRUGS,
TRANQUILIZERS, OR ANTIDEPRESSANTS, PLEASE CHECK WITH YOUR
DOCTOR BEFORE CONSUMING ANY NUTRIBLAST RECIPES.

• THE FOLLOWING LIST OF SEEDS AND PITS CONTAIN CHEMICALS THAT
RELEASE CYANIDE INTO THE BODY WHEN INGESTED. DO NOT USE THE
FOLLOWING SEEDS AND PITS IN THE NUTRIBULLET: APPLE SEEDS,
APRICOT SEEDS, CHERRY PITS, PLUM PITS, AND PEACH PITS.

54

CLEANING

WARNING:

THE NUTRIBULLET

ALWAYS UNPLUG THE NUTRIBULLET WHEN CLEANING OR ASSEMBLING.

• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE
DISHWASHER.

• RINSE BLADES (AND CUP) IMMEDIATELY AFTER USE TO PREVENT DEBRIS
FROM DRYING AND STICKING TO VESSELS – IF NECESSARY, USE A DISH
BRUSH TO LOOSEN ANY DEBRIS.

• HAND WASH ONLY WITH MILD DISH SOAP AND WARM WATER (NOT HOT).

• DRY IMMEDIATELY.

• FOR TOUGH DEBRIS, FILL THE CUP
(NOT HOT), MILD SOAPY WATER. THEN, SIMPLY TWIST ON THE BLADE, POP
IT ON THE BASE AND GIVE IT A RUN FOR 30- 45 SECONDS. THIS WILL LOOSEN
THE STUCK INGREDIENTS, AND WITH A LIGHT SCRUB AND RINSE IN WARM
WATER, YOU’LL BE ALL DONE.

• DO NOT PUT THE BLADES IN THE DISHWASHER AS ELEVATED TEMPERATURES
CAN DAMAGE GASKETS. SIMPLY HAND WASH WITH WARM, MILD SOAPY

WATER.

• WHEN WASHING BLADE, DO NOT ATTEMPT TO REMOVE THE GASKET RING.
SIMPLY HAND WASH THE BLADES IN ROOM TEMPERATURE, MILD SOAPY
WATER. IF NECESSARY, USE A DISH BRUSH TO LOOSEN DEBRIS. IF DESIRED,
THE BLADE AND GASKET MAY BE FURTHER DISINFECTED BY RINSING IN A
10% DILUTED SOLUTION OF WHITE VINEGAR AND WATER OR USE LEMON
JUICE. ATTEMPTED REMOVAL OF THE GASKET MAY PERMANENTLY DAMAGE
THE BLADE CONFIGURATION AND CAUSE LEAKAGE.

• IF IN TIME, A GASKET BECOMES LOOSE OR DAMAGED WITH USE, PLEASE
CONTACT CUSTOMER SERVICE FOR A REPLACEMENT BLADE HOLDER AT
WWW.BULLETBRANDS.COM.AU OR
WWW.BULLETBRANDS.CO.NZ

½ FULL WITH ROOM TEMPERATURE

DO NOT WASH THE BL ADES IN THE DISHWASHER. THE NUTRIBULLET
CUP AND BLADE SHOULD NOT BE IMMERSED IN BOILING WATER FOR ANY
REASON AS THIS WILL WA RP THE PL ASTIC AND DAMAGE THE

GASKETS.

STUBBORN CLEANUP

If ingredients dry inside the NutriBullet, make your cleanup a snap by filling the cup
about

 full with room temperature (not hot) soapy water and screw on the Blade.

Place the cup assembly on the NutriBullet, Power Base for about 20-30 seconds. This
will loosen the stuck ingredients, and with a light scrub and rinse in warm water,
you’ll be all done.

MAINTENANCE

For the most part the Power Base doesn’t really get dirty, but if you neglect
to twist the blade on to the cup tightly, liquids can leak out and get into the
base and activator buttons.

Here’s how to clean it up.

Step 1: The most important thing is to UNPLUG the Power Base before cleaning!
Step 2: Make sure the blade is not attached to the Power Base.
Step 3: Use a damp cloth to wipe down the inside and outside of the Power Base.

IN THE EVENT OF SPILL, CHECK THE UNDERSIDE OF THE BASE. IF LIQUID
FOOD IS EXITING THE VENTS, DO NOT USE UNTIL INSPECTED BY A CERTIFIED
ELECTRICIAN AS THE MOTOR HAS LIKELY BEEN COVERED IN FOOD, POTENTIALLY
GIVING USER AN ELECTRIC SHOCK.

Never put your hands or utensils near the moving blade and never use your hands
or utensils to press the activator buttons down while the Power Base is plugged in.

BLADES AND CUPS ARE CONSUMABLE PARTS
AND WILL REQUIRE REPLACEMENT.

WE RECOMMEND 6 MONTHS ON BLADES AND
CUPS AS REQUIRED.

76