NutriBullet N9C-0907 User Manual

USER GUIDE

& RECIPE BOOK

123

IMPORTANT SAFEGUARDS &
CAUTIONARY INFORMATION

FOR YOUR SAFETY, CAREFULLY READ ALL INSTRUCTIONS
BEFORE OPERATING YOUR NUTRIBULLET.

When using any electrical appliance, basic safety precautions should always be
observed, including the following:

PERSONAL SAFETY

• DO NOT PUT HOT LIQUIDS IN ANY OF THE BLENDING VESSELS BEFORE
BLENDING. Start with cool or room temperature ingredients. Heated
ingredients can create internal pressure in a sealed blending vessel, which
may erupt on opening and cause thermal injury.

• FRICTION FROM THE ROTATING BLADE CAN CAUSE INGREDIENTS TO HEAT
AND GENERATE INTERNAL PRESSURE IN THE SEALED VESSEL. Do not
continuously operate for more than one minute. If the vessel is warm to
touch, allow to cool before carefully opening pointed away from your body.

• NEVER PERMIT ANY BLENDED MIXTURE TO SIT INSIDE A SEALED VESSEL
WITHOUT FIRST RELEASING INTERNAL PRESSURE.

• NEVER STORE THE precision extractor BLADE ON THE POWER BASE! NEVER
LEAVE THE precision extractor BLADE ON the POWER BASE WITHOUT A
CUP OR VESSEL ATTACHED.

• REMOVE SPOON OR OTHER FOREIGN OBJECTS BEFORE BLENDING.

• NEVER LEAVE THE NUTRIBULLET UNATTENDED WHILE IT IS IN USE. CLOSE
SUPERVISION IS NECESSARY WHEN ANY APPLIANCE IS USED BY OR NEAR
CHILDREN.

• TO AVOID RISK OF ELECTRIC SHOCK, NEVER IMMERSE THE CORD, PLUG, OR
POWER BASE OF BLENDER IN WATER OR OTHER LIQUIDS.

• AT ALL TIMES, AVOID CONTACT WITH MOVING PARTS

• NEVER BLEND CARBONATED INGREDIENTS OR LIQUIDS. BUILT-UP
PRESSURE FROM RELEASED GASES CAN CAUSE CONTAINER TO BURST,
RESULTING IN POSSIBLE INJURY.

4

• To reduce the risk of personal injury or damage to the device, keep hands and
utensils away from the cutting blade.

• To reduce the risk of injury and leakage, make sure the blade base is securely
screwed onto the cup before placing it on the Power Base and operating the
appliance.

• Blades are sharp. Handle carefully.

• The use of attachments not recommended or sold by the manufacturer may
cause fire, electric shock, or injury.

• Never remove cup/blade assembly from the Power Base until the motor
comes to a complete stop. Removing the cup/blade assembly while Power
Base is still running may cause damage the blade coupling or motor gear.

• Do not allow blended mixtures to sit for long periods in a sealed container.
The sugars in the fruit and vegetables can ferment, causing pressure to build
up and expand in the vessel which can cause ingredients to burst and spray
out when moved or opened.

• Never blend carbonated beverages. Built-up pressure from released gases
can cause container to burst, resulting in possible injury.

• If the NutriBullet malfunctions or is dropped, or damaged in any manner,
discontinue use and contact Customer Service for further assistance.

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

5

EXTRACTION SAFETY PRECAUTIONS

The NutriBullet Select has the following modes: Pulse, Blend, Crush and
Variable Speed Mode, which are discussed in the "How It Works" section of
this manual. Carefully read and follow all safety precautions, particularly when
operating the NutriBullet Select in each of the aforementioned modes.

• NEVER USE THE PRECISION EXTRACTOR BLADE TO BLEND WITHOUT

LIQUID AS DOING SO MAY DAMAGE IT.

• NEVER PUT YOUR HANDS OR UTENSILS NEAR THE MOVING PRECISION

EXTRACTOR BLADE AND NEVER USE YOUR HANDS OR UTENSILS TO
PRESS THE ACTIVATOR BUTTONS DOWN WHILE THE NUTRIBULLET
SELECT IS PLUGGED IN.

• THE PRECISION EXTRACTOR BLADE IS SHARP! HANDLE CAREFULLY. USE

CARE WHILE HANDLING THE PRECISION EXTR ACTOR BLADE. DO NOT
TOUCH THE PRECISION EXTRACTOR BLADE EDGES TO AVOID INJURY.

• CHECK GASKET TO MAKE SURE IT IS COMPLETELY SEATED IN THE PRECISION

EXTRACTOR BLADE UNIT BEFORE EACH USE. CONTACT CUSTOMER SERVICE
FOR ASSISTANCE IF THE GASKET IS NOT COMPLETELY SEATED.

• WE RECOMMEND REPLACING YOUR PRECISION EXTRACTOR BLADE

EVERY 6 MONTHS OR AS NEEDED FOR OPTIMAL PERFORMANCE. TO
ORDER A REPLACEMENT PRECISION EXTRACTOR BLADE, SIMPLY VISIT:
WWW.BULLETBRANDS.COM.AU OR WWW.BULLETBRANDS.CO.NZ

• THE NUTRIBULLET SELECT IS NOT INTENDED FOR USE IN MICROWAVE

OVENS. DO NOT PLACE THE NUTRIBULLET SELECT CUPS, POWER BASE
OR ANY NUTRIBULLET SELECT ACCESSORY IN A MICROWAVE OVEN AS
THIS MAY RESULT IN DAMAGE TO THE ACCESSORY. TO HEAT SOUPS
AFTER BLENDING COOL OR ROOM TEMPERATURE INGREDIENTS,
TRANSFER MIXTURE TO A MICROWAVE SAFE CONTAINER OR TO A
STOVE-TOP POT PRIOR TO HEATING.

• NEVER MICROWAVE ANY UNVENTED, SEALED CONTAINERS AS THEIR

CONTENTS MAY EXPAND WITH HEAT PRESSURE AND EXPLODE,
RESULTING IN POSSIBLE INJURY OR PROPERTY DAMAGE.

6

• DO NOT PUT HOT INGREDIENTS INTO THE BLENDER PITCHER

CONTAINER. ALWAYS START WITH ROOM TEMPERATURE OR COOLER
INGREDIENTS. THE BLENDER CONTAINER SHOULD ALWAYS BE USED
WITH THE VENTED LID. TO HEAT SOUPS AFTER BLENDING COOL
OR ROOM TEMPERATURE INGREDIENTS,TRANSFER MIXTURE TO A
MICROWAVE SAFE CONTAINER OR A STOVE-TOP POT PRIOR TO HEATING.
DO NOT RUN THE NUTRIBULLET SELECT WITH EMPTY CUPS OR AN
EMPTY PITCHER AS THIS CAN DAMAGE THE UNIT.

• AFTER BLENDING INGREDIENTS, ALLOW THE CONTENTS TO SETTLE

AND RELEASE ANY PRESSURE THAT MAY HAVE BUILT UP DURING THE
EXTRACTION PROCESS. ALWAYS UNSCREW THE PRECISION EXTRACTOR
BLADE ASSEMBLY FROM THE VESSEL SLOWLY AND POINTED AWAY FROM
YOU IN CASE THERE IS ANY BUILT UP PRESSURE.

• IF YOU WILL NOT CONSUME YOUR BLAST / SOUP IMMEDIATELY, USE THE

STAY FRESH LID TO CLOSE THE CONTAINER. REMEMBER TO UNSCREW
THE LID AND RELEASE PRESSURE PERIODICALLY AS THIS WILL RELEASE
ANY ADDED PRESSURE THAT MAY HAVE BUILT UP DUE TO FERMENTATION.
THE SUGARS IN THE FRUIT AND VEGETABLES CAN FERMENT, CAUSING
PRESSURE TO BUILD UP AND EXPAND IN THE VESSEL, WHICH CAN CAUSE
INGREDIENTS TO BURST AND SPRAY OUT WHEN MOVED OR OPENED.

• NEVER PERMIT ANY BLENDED MIXTURE TO SIT INSIDE A SEALED CUP

WITH A PRECISION EXTRACTOR BLADE WITHOUT FIRST RELEASING
THE PRESSURE. BY UNSCREWING THE LID AND OPENING THE CUP FOR
A FEW MOMENTS, THE PRESSURE WILL DISSIPATE. DO NOT USE THE
PITCHER ON THE MOTOR BASE WITHOUT THE BLACK LID AND CLEAR
VENT TOP IN PLACE WHEN RUNNING THE NUTRIBULLET SELECT.

WARNING! POTENTIAL OF PERSONAL INJURY FROM MISUSE.

TAKE CARE WHEN HANDLING THE SHARP CUTTING BLADES,

EMPTYING THE PITCHER AND DURING CLEANING.

• Avoid contact with moving parts.

• NEVER STORE THE PRECISION EXTRACTOR BLADE ON THE POWER BASE!

NEVER LEAVE THE PRECISION EXTRACTOR BLADE ON THE POWER BASE
WITHOUT A CUP OR VESSEL ATTACHED.

• Do not use the precision extractor blade for grinding dr y materials such as grains,

cereal, or coee.

• Do not use the NutriBullet Select outdoors or in inclement weather.

7

SAFETY WARNINGS: EXTRACTING FOR NUTRIBLASTS

• THE NUTRIBULLET SELECT IS PROGRAMMED TO RUN FOR 1 MINUTE IN

EACH SELECTED MODE.

• IF THE POWER DOES NOT SHUT OFF AFTER 1 MINUTE DURING ANY

SELECTED MODE, STOP IT MANUALLY BY TURNING THE KNOB TO OFF OR
SIMPLY TWIST THE VESSEL TO THE RIGHT AND LIFT CUP OFF POWER BASE.

• TO TURN OFF THE MACHINE AT ANY TIME DURING THE CYCLE (G BUTTON

WILL BE GREEN), TURN THE POWER KNOB TO THE UPRIGHT OFF POSITION
OR SIMPLY PUSH DOWN ON THE CUP AND TWIST TO THE RIGHT AND LIFT
THE CUP OFF THE POWER BASE, WHICH WILL TURN OFF THE UNIT. THE
LIGHT WILL STOP GLOWING, AND THE MOTOR WILL STOP, SIGNIFYING THAT
THE POWER IS OFF. ALWAYS ALLOW THE MOTOR TO STOP COMPLETELY
BEFORE REMOVING THE CUP/ PRECISION EXTRACTOR BLADE. ALWAYS
UNPLUG THE POWER BASE UPON COMPLETION OF USE.

• DO NOT TOUCH COUPLING GEAR DIRECTLY WITH HANDS AFTER USE!

THE COUPLING GEAR IN PRECISION EXTRACTOR BLADE BASE AND
POWER BASE WILL BE HOT!

• DO NOT RUN IN ANY MODE FOR MORE THAN 1 MINUTE INTERVALS.

• AFTER INITIAL CYCLE, ALLOW POWER BASE TO SHUT OFF COMPLETELY

AND WAIT FOR 15 SECONDS BEFORE STARTING ANOTHER CYCLE.

• DO NOT RUN FOR MORE THAN 3 CONSECUTIVE 1 MINUTE INTERVALS

WITHOUT ALLOWING THE POWER BASE TO COOL TO PREVENT
OVERHEATING AND ALLOW INGREDIENTS TO SETTLE FOR 2-3 MINUTES
AFTER THE 3RD EXTRACTION CYCLE.

• POWER BASE IS EQUIPPED WITH AN INTERNAL THERMAL BREAKER THAT

SHUTS OFF THE POWER BASE IF THE UNIT OVERHEATS.

• IF THE POWER BASE OVERHEATS AND SHUTS OFF, UNPLUG THE POWER

BASE AND LET IT COOL FOR AN HOUR OR MORE BEFORE ATTEMPTING TO USE
IT AGAIN. POWER BASE WILL RESET WHEN THE UNIT IS POWERED OFF AND
THE THERMAL BREAKER HAS COOLED DOWN SUFFICIENTLY.

• ALLOW MACHINE TO COOL DOWN FOR 10 MIN AFTER 4-5 CYCLES TO

PREVENT OVERHEATING AND DAMAGING THE UNIT.

• To prevent leakage, always align and hand-tighten the precision extractor

blade to the vessel or cup prior to inverting it and placing the assembly on to
the motor base.

• TO TURN ON THE NUTRIBULLET SELECT: Choose the desired Mode

by turning the dial to align with the desired mode as indicated on the
NutriBullet Select Power Base. Press the center button. The light will glow

GREEN and the motor will cycle up.

8

• In Pulse Mode, push and release until you achieve the desired consistency.

For Blend and Crush Modes, once you push the button it will continuously
glow GREEN while it performs the pre-programmed function. Aer 1 minute,
the light will glow RED and the motor will power down automatically.

• Note: In the Pulse Mode, the motor will run for a maximum of one minute

while pressing the G-button. Aer one minute, to reset it to pulse again,
simply rotate the knob back to the OFF position to reset and then back to the
Pulse mode. Always turn the dial so that the pointer is in pointing to OFF and
unplug the unit when processing is finished.

• Once activated, the unit will run for 1 minute in Blend, Crush and Variable

modes before it automatically turns off. The G-button will stop glowing

GREEN at the end of the 1-minute cycle. To turn off completely before the

cycle is complete, rotate the knob to the upright OFF position. The light on
the G-button will no longer be lit, signifying the power is off.

• In Crush Mode, the unit will turn on and o several times and run for a total of 75

seconds then stop. To reset, rotate the knob to the OFF position to reset and then
back to crush mode. This is a normal function of the NutriBullet Select.

• Turn the NutriBullet Select o aer each use by rotating the G-button

knob to the upright OFF position. The GREEN light will stop glowing,
signifying power is o.

PITCHER INSTRUCTIONS

• Always attach the precision extractor blade to Pitcher and hand tighten it to

prevent leakage prior to adding ingredients into the pitcher.

• NEVER USE THE PRECISION EXTRACTOR BLADE TO BLEND WITHOUT

LIQUID AS DOING SO MAY DAMAGE THE BLADE.

• Do not use the pitcher on the motor base without the black lid and clear vent

top in place when running the NutriBullet Select.

• Always allow the power base motor and precision extractor blade to come to a

complete stop prior to adding additional ingredients during the processing period.

• WARNING! NEVER PUT YOUR HANDS IN THE PITCHER WHEN ATTACHED TO

THE POWER BASE AS DOING SO MAY CAUSE SERIOUS INJURY.

POWER OFF INSTRUCTIONS

• To turn off the machine at any time while running (indicated by the GREEN

glowing G-button), simply press the G-Button. The motor will stop. Then
rotate the knob to the upright OFF position. Always make sure that the knob
is in the upright OFF position and the unit is unplugged when the machine is
not in use.

9

CLEANING

THE NUTRIBULLET

ALWAYS UNPLUG THE NUTRIBULLET WHEN CLEANING OR ASSEMBLING.

• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN THE
DISHWASHER.

• RINSE BLADES (AND CUP) IMMEDIATELY AFTER USE TO PREVENT DEBRIS
FROM DRYING AND STICKING TO VESSELS – IF NECESSARY, USE A DISH
BRUSH TO LOOSEN ANY DEBRIS.

• HAND WASH ONLY WITH MILD DISH SOAP AND WARM WATER (NOT HOT).

• DRY IMMEDIATELY.

• FOR TOUGH DEBRIS, FILL THE CUP
MILD SOAPY WATER. THEN, SIMPLY TWIST ON THE BLADE, POP IT ON THE
BASE AND GIVE IT A RUN FOR 30- 45 SECONDS. FOLLOW UP WITH A QUICK
BRUSH.

• DO NOT PUT THE BLADES IN THE DISHWASHER AS ELEVATED
TEMPER ATURES CAN DAMAGE GASKETS. SIMPLY HAND WASH WITH WARM,

MILD SOAPY WATER.

• WHEN WASHING BLADE, DO NOT ATTEMPT TO REMOVE THE GASKET
RING. SIMPLY HAND WASH THE BLADES IN WARM, MILD SOAPY WATER.
IF NECESSARY, USE A DISH BRUSH TO LOOSEN DEBRIS. IF DESIRED, THE
BLADE AND GASKET MAY BE FURTHER DISINFECTED BY RINSING IN A 10%
DILUTED SOLUTION OF WHITE VINEGAR AND WATER OR USE LEMON JUICE.
ATTEMPTED REMOVAL OF THE GASKET MAY PERMANENTLY DAMAGE THE
BLADE CONFIGURATION AND CAUSE LEAKAGE.

• IF IN TIME, A GASKET BECOMES LOOSE OR DAMAGED WITH USE, PLEASE
CONTACT CUSTOMER SERVICE FOR A REPLACEMENT BLADE HOLDER AT
WWW.BULLETBRANDS.AU OR
WWW.BULLETBRANDS.CO.NZ

½ FULL WITH WARM (NOT HOT),

BLADES AND CUPS ARE CONSUMABLE PARTS
AND WILL REQUIRE REPLACEMENT.

WE RECOMMEND 6 MONTHS ON BLADES AND
CUPS AS REQUIRED.

10

WARNING:

DO NOT WASH THE BLADES IN THE DISHWASHER. THE NUTRIBULLET
CUP AND BLADE SHOULD NOT BE IMMERSED IN BOILING WATER FOR ANY
REASON AS THIS WILL WARP THE PLASTIC AND DAMAGE THE

GASKETS.

STUBBORN CLEANUP

If ingredients dry inside the NutriBullet, make your cleanup a snap by filling the cup
about

 full with warm (not hot) soapy water and screw on the Blade. Place the cup

assembly on the NutriBullet, Power Base for about 20-30 seconds. That will loosen
the stuck ingredients, and with a light scrub, you’ll be all done.

MAINTENANCE

For the most part the Power Base doesn’t really get dirty, but if you neglect
to twist the blade on to the cup tightly, liquids can leak out and get into the
base and activator buttons.

Here’s how to clean it up.

Step 1: The most important thing is to UNPLUG the Power Base before cleaning!
Step 2: Make sure the blade is not attached to the Power Base.
Step 3: Use a damp cloth to wipe down the inside and outside of the Power Base.

IN THE EVENT OF SPILL, CHECK THE UNDERSIDE OF THE BASE. IF LIQUID
FOOD IS EXITING THE VENTS, DO NOT USE UNTIL INSPECTED BY A CERTIFIED
ELECTRICIAN AS THE MOTOR HAS LIKELY BEEN COVERED IN FOOD, POTENTIALLY
GIVING USER AN ELECTRIC SHOCK.

Never put your hands or utensils near the moving blade and never use your hands
or utensils to press the activator buttons down while the Power Base is plugged in.

11

PULSE BLEND

RPM

USER INSTRUCTIONS RECIPE USAGE

4,000 20,000

Rotate dial to the le to
Pulse setting. Press and
release the center button
until the desired texture is
achieved. Pulse will run for
a maximum of one minute
while holding the center
button. Aer one minute,
rotate back to "o" to reset.

For creating chunky
textured foods. Salsa,
diced tomatoes, minced
garlic, onions, and dips.

Rotate dial to the le
to Blend setting. Press
center button. Blend
will run for one minute.
Aer one minute, unit
will stop. Rotate back to
"o" to reset.

For silky smooth
consistencies like
smoothies, soups
and purees.

12

CRUSH

20,000 4,000-20,000

VARIABLE SPEED

Rotate dial to the le to
Crush setting. Press center
button. This is a SMART
Technology Pre-Program.
Unit will turn on and o
several times and run for
a total of 75 seconds then
stop. Rotate back to "o"
to reset.

For crushing ice, frozen fruit,
nuts, seeds and more.

Rotate dial to the right to
desired speed. Press center
button and the unit will
run for one minute. Change
variable speed at any time
during the one-minute
cycle to achieve desired
consistency. Aer one minute,
unit will stop. Rotate back to
"o" to reset.

This setting is for complete
control of your own recipes.
With Variable Speed control
you decide how you blend
your ingredients!

13

USER GUIDE

& RECIPE BOOK

TABLE OF

CONTENTS

18 WHY NUTRIBULLET

SELECT

?

20 WHAT YOU GET

26 USING THE

NUTRIBULLET SELECT

27 Icons
28 How It Works

30 OVERVIEW

33 RECIPES

34 Pulse

48 Blend
62 Crush

72 Variable Speeds

82 WARRANTY

WHY
NUTRIBULLET
SELECT?

Now you can enjoy all the power and ease
of the original NutriBullet coupled with a
whole new level of versatility and control.
NutriBullet Select has the settings and
variable speeds you need to have the
perfect amount of control over your recipe
output. With three useful settings: pulse,
blend and crush, along with 5 variable
speeds you get all the power, control and
versatility of other high priced blenders,
without the gigantic price tag and without
giving up precious counter top space!
Chunky salsas and chutneys, silky smooth
smoothies, soups and dips, healthy fruit
sorbets and tangy icees...are all made
in seconds with the powerful, versatile
NutriBullet Select.

18

/ WHAT YOU GET

THE POWER BASE

NutriBullet Select comes
with a powerful 1000-watt*
power base with 3 pre­programmed settings and
5 variable speeds.

PULSE – Press the button as many times as you need to

achieve your desired consistency. This is the setting you
use for chunkier recipes like salsas, chutneys and minces.

BLEND – Just push the button to get 60 seconds of

straight nutrient extraction power. Use this setting when
you want your dish to turn out silky smooth.

20

CRUSH – Transform rock-hard ice into tasty treats with

the Crush setting. Simply select Crush and press the
button. The NutriBullet Select hands-free technology takes
over and crushes your hard ingredients to perfection.

VARIABLE SPEED SETTINGS – The variable speeds

run from setting 1 at 4,000 RPM, through setting 5 which goes
up to 20,000 RPM. Low settings are great for whipping foods,
then slowly move up to higher settings for foods such as cream
cheese and sauces.

*The 1000 wat t rating of this appliance was obtained by using the 700ml Cup with

Blade Holder A ssembly and 500g of Rice at max speed.

PULSE

You control the power
with the Pulse setting.
Make chunky salsas or
creamy dips, and
mince, chop and dice
with ease.

BLEND

Precise 60-second Blend
setting for smoothies,
shakes, and creamy
soups—anything you
want to have a silky
smooth consistency.

POWER SETTINGS:

CRUSH

Use the Crush setting for
rock-hard foods like ice,
frozen fruits, nuts,
cinnamon sticks, etc.

VARIABLE SPEEDS

Use Variable Speeds for whipping
foods by starting slow and
increasing to high—for foods
such as cream cheese,
mayonnaise, sauces, etc.

21

PRECISION
EXTRACTOR BLADE

Chop, blend and crush your ingredients
to perfection with the state-of-the-art
Precision Extractor Blade. Simply twist
the Precision Extractor Blade onto the
Pitcher or NutriBullet Select Cups and
you are ready to start.

PITCHER WITH LID

The 800ml Pitcher is a perfect vessel for
making multiple servings of your favorite
drinks, smoothies and sauces. Plus, you
can add ingredients as you blend. Just
use the pop out lid. Simply twist on the
Precision Extractor Blade, choose your
favorite setting and give it a whirl!

22

COMFORT LIP RING

Attach this Lip Ring for comfortable,
easy sipping.

SHORT CUP

When making smaller-sized recipes like
dips, salsas, minced foods and chutneys,
the 290ml Short Cup is the perfect vessel
for the job. Simply twist on the Precision
Extractor Blade, choose your favorite setting
and either pulse or blend your ingredients
to the exact consistency you desire.

COLOSSAL CUP

Enjoy a hefty serving of your favorite
beverages, shakes, sauces and dips with
the handy 700ml Colossal Cup. Simply
twist on the Precision Extractor Blade,
choose your favorite setting and enjoy
your favorite recipe in just seconds!

FLIP-TOP LID

Take your masterpiece on the go with
the handy Flip-Top Lid. Simply twist the
lid onto your cup and you are ready to
run out the door!

VESSEL GRIP

Attach this Vessel Grip for comfortable,
easy handling.

RESEALABLE LID

Store your recipes and leftovers right in
the cup! Just twist on the Resealable Lid
and you have a perfect storage vessel.

MORE PARTS AVAILABLE AT

WWW.BULLETBRANDS.AU OR

WWW.BULLETBRANDS.CO.NZ

23

NUTRIBULLET SELECT
USER GUIDE
& RECIPE BOOK

This book features nutritional
information and recipes to inspire
you on your journey to optimal
health. Learn the ins and outs
of your new NutriBullet Select
including important safety
precautions and care for safe,
effective, long-term use.

24

/ SUPPORT TOOLS

NutriLiving.com has hundreds of Blast recipes, as well as
informative articles and professional advice from a team of
Registered Dietitians. At NutriLiving.com, you will also find
amazing NutriBullet success stories.

NUTRIBULLET APP

Make the perfect NutriBlast
smoothie every time! With hundreds
of recipes featuring your favorite
fruits and vegetables, our free
recipes app will ensure you have
every resource you need to achieve
your personal health goals.

24/7 ACCESS TO
NUTRILIVING.COM

PROFESSIONAL SUPPORT WHEN
YOU NEED IT MOST.

Get answers to your health-related
questions from our NutriBullet
community and Registered
Dietitians 24/7.

SHOP ONLINE

WWW.BULLETBRANDS.COM.AU
WWW.BULLETBRANDS.CO.NZ

25

26

USING THE
NUTRIBULLET
SELECT

Each NutriBullet Select recipe comes with a suggested
vessel and technique. Simply follow the directions
provided and you are sure to create a recipe you’ll want to
enjoy again and again.