NutriBullet | 1000 & 1200 SERIES.
USER GUIDE & RECIPE BOOK
Important safeguards &
cautionary information.
Warning! To avoid the risk of serious injury, carefully
read all instructions before operating your NutriBullet®.
When using any electrical appliance, basic safety
precautions should always be observed, including
the following critical information.
PERSONAL SAFETY
Do not put hot liquids in
any of the blending vessels
before blending.
Start with cool or room
temperature ingredients.
Heated ingredients can
WARNING!
create internal pressure in a
sealed blending vessel, which
may erupt on opening and
cause thermal injury.
Friction from the rotating
blade will cause ingredients
to heat and generate internal
pressure in the sealed vessel.
Do not continuously operate
for more than one minute. If
the vessel is warm to touch,
allow to cool before carefully
opening pointed away from
your body.
Never blend carbonated
ingredients or liquids.
Built-up pressure from
released gases can
cause container to burst,
resulting in possible injury.
Never permit any blended
mixture to sit inside a sealed
vessel without first releasing
WARNING!
internal pressure.
Never store the extractor blade
on the power base without a
cup or vessel attached.
Remove spoon or other foreign
objects before blending.
Never leave the NutriBullet®
unattended while it is in use.
Close supervision is necessary
when any appliance is used by
or near children.
To avoid risk of electric shock,
never immerse the cord, plug,
or power base of blender in
water or other liquids.
At all times, avoid contact
with moving parts.
This appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
Children should be supervised
to ensure that they do not play
with the appliance.
If the power supply cord is
damaged, it must be replaced
by the manufacturer, its
service agent or similarly
qualified persons in order to
avoid a hazard.
Switch o the appliance and
disconnect from power supply
before changing accessories
or handling moving parts.
To reduce the risk of personal
injury or damage to the device,
keep hands and utensils away
from the cutting blade.
To reduce the risk of injury and
leakage, make sure the blade
base is securely screwed onto
the cup before placing it on
the power base and operating
the appliance.
Blades are sharp. Handle
carefully.
The use of attachments not
recommended or not sold by
the manufacturer may cause
fire, electric shock, or injury.
Do not allow blended mixtures
to sit for long periods in a
sealed container. The sugars
in the fruit and vegetables
can ferment, causing pressure
to build up and expand in
the vessel which can cause
ingredients to erupt and spray
out when moved or opened.
WARNING!
If you are taking any
medication, especially
cholesterol - lowering
WARNING!
medication, blood thinners,
blood pressure drugs,
tranquilizers, or antidepressants, please check with your
physician before consuming
any NutriBullet® recipes.
The following list of seeds and
pips contain chemicals that
release cyanide into the body
when ingested. Do not use the
following seeds and pips in
the nutribullet: apple seeds,
apricot seeds, cherry pips,
plum pips, and peach pips.
PRODUCT SAFETY
To prevent overheating,
never allow the motor to run
continuously for more than
one minute at a time, as this
may cause damage to the
motor as well as increase the
thermal pressure inside the
cup which can cause personal
injury.
If the NutriBullet® malfunctions
or is dropped, or damaged in
any manner, discontinue use
and contact Customer Service
for further assistance.
Check gasket to make sure
it is completely seated in the
blade unit before each use. If
seal is damaged, replace the
complete blade assembly.
If the motor stops for any
reason, unplug the power
base and let it cool for at least
15 minutes as this will reset the
internal thermal breaker.
Never use the NutriBullet®
without adding liquid or
when the cup is empty, as
doing so may damage the
blade.
The NutriBullet® is not intended
for use in microwave ovens.
Do not place the NutriBullet
cups, power base or any
accessories in a microwave as
this may result in damage to
the appliance.
Use of adapters and
converters is considered an
unauthorized modification
of the product and as such
will void the warranty. Use
of this product in locations
with dierent electrical
specifications may result in
damage to the product.
CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cutout, this appliance must
not be supplied through an
external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and o by the
utility.
Periodically inspect cord and
plug for damage. Do not
operate any appliance with
a damaged cord or plug.
Do not pull, twist, or damage
the power cord.
Do not allow the cord to hang
over the side of the counter
or table.
Do not allow cord to touch
hot surfaces, including stove.
®
The NutriBullet
is made exclusively to work
with the NutriBullet® cups and
blades only and not other Bullet
branded products such as the
Magic Bullet®. Use with items
not specifically manufactured
for the NutriBullet® will void
the warranty.
power base
WARNING: VENTILATION
CAUTION
Always operate the
nutribullet on a level surface,
leaving unobstructed space
WARNING!
beneath and around the
power base to permit proper
air circulation. Slots and
openings on the bottom of
the product are provided for
ventilation to ensure reliable
motor operation and to
prevent over-heating.
WARNING: to prevent fire
hazard, power base openings
should be free of dust or lint
and never obstructed with
flammable materials such
as newspapers, tablecloths,
napkins, dishtowels, or
place mats.
The cyclonic action of your
NutriBullet® requires the use of
liquids to make smoothies and
other nutritious beverages.
The NutriBullet® is not
intended to be used as an
ice crusher and not without
liquids. To make a delicious
cold smoothie, we suggest that
you use frozen fruit and chilled
liquids. Alternatively, you may
add crushed ice, up to 25%
of the total cup volume, with
water or other liquid filled up
to the “MAX” line. Do not crush
ice or other hard items without
liquid, as such prolonged use
over time may dull or damage
the blades. Always inspect
your blades before each use.
We recommend replacing
your extractor blade every 6
months (depending on use)
or as needed for optimal
performance.
Do not use NutriBullet®
outdoors. If exposed to
inclement weather elements
such as rain or other wet
conditions, discontinue use.
Unplug the NutriBullet® when
it is not in use. Make sure the
power base is unplugged
before assembling, disassembling, adding additional
parts, or cleaning.
To avoid leakage, do not
overfill the blending vessels!
When filling the blending
vessels, make sure your
ingredients do not exceed
the MAX line. Exceeding the
indicated MAX line can result
in leakage, and may lead to
dangerous pressurization.
Never remove cup/blade
assembly from the power
base until the motor comes to
a complete stop. Removing
the cup/blade assembly
while power base is still
running may cause damage
the blade coupling or motor
gear.
Save these
!
instructions!
FOR HOUSEHOLD
US E O NLY
Care & maintenance.
Cleaning the NutriBullet
simply place any of the pieces
(except for the motor base and
extractor blade) on the TOP
RACK of the dishwasher or hand
wash with warm soapy water
and rinse.
®
is easy,
Here’s how to clean
the NutriBullet®:
STEP 1:
The most important thing
— ALWAYS UNPLUG the
motor base from the power
supply outlet when it is
left unattended, before
assembling, disassembling,
changing accessories or
approaching parts that move
in use or when cleaning. Do not
attempt to handle the appliance
until all parts have stopped
moving!
STEP 2:
Remove the cup/extractor blade
assembly from the motor base.
STEP 3:
Clean the individual components
(motor base, extractor blades,
NutriBullet® cups) as follows:
MOTOR BASE:
• For the most part, the motor
base doesn’t really get dirty,
but if you neglect to twist the
extractor blade on to the cup
tightly, liquids can leak out
and get into the base and
stick to the activator buttons.
• To avoid risk of injury, NEVER
use your hands or utensils
to clean the white actuator
Tabs while the NutriBullet® is
plugged in.
• Do not remove the rubber or
plastic liners inside the motor
base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the inside
and outside of the motor base
until clean.
• Pay particular attention
to the white Actuator Tabs
on the inside of the motor
base to loosen any sticky
debris from drips and spills.
If necessary, you may use a
small brush to scrub the area
to ensure it is kept clean.
WARNING: Never submerge
the motor base in water.
EXTRACTOR BLADE:
• DO NOT REMOVE THE
GASKET as this will
permanently damage the
extractor blade and cause
leakage. If after washing as
indicated above additional
disinfecting is desired,
you may rinse with a 10%
vinegar/water solution or
with lemon juice. If, over
time, the gasket becomes
loose or damaged, you may
order a new extractor blade
at: bulletbrands.com.au
bulletbrands.co.nz
or contact Customer Service.
• Dry the extractor blade
completely. It is helpful to
turn the blade on its side in
your dish drainer to ensure
BOTH SIDES of the extractor
blade are completely dried.
NUTRIBULLET® CUPS
& TOGO LIDS:
• These items are all TOP
RACK dishwasher safe. We
recommend rinsing them
and giving them a quick
brush with a dish brush to
remove any dried debris
before washing them in the
dishwasher. NEVER use the
sanitize cycle to wash the
Cups as this may warp the
plastic.
• Regularly check the 3 tabs
on the side of the Cup
(cracking, crazing, breakage
or rounding). If damaged,
replace immediately to
prevent possible personal
injury.
• NEVER USE A CUP WITH A
BROKEN, DAMAGED, OR
MISSING TAB AS DOING SO
MAY CAUSE THE CUP AND
MOTOR BASE TO SEPARATE
EXPOSING THE BLADE
ASSEMBLY!
STUBBORN CLEAN UP:
• If ingredients dry inside the
NutriBullet® Cup, make your
cleanup a snap by filling the
cup about 2/3 full with room
temperature (21°C/70°F or
less) water and screw on
the extractor blade. Place
the cup/extractor blade
assembly on the NutriBullet®
motor base for about 20-30
seconds. This will loosen the
stuck ingredients, and with a
light scrub and rinse, you’ll
be all finished.
Replacement parts.
To order additional parts and
accessories, please visit our
website at:
bulletbrands.com.au
bulletbrands.co.nz.
8
INTRODUCTION
8
For busy, active people, good nutrition is a prime concern. Eating
wholesome, high quality food ensures you operate at the highest level,
whether on the field, in the boardroom, in the classroom, or at home.
The problem that so oen presents itself, however, is that unprocessed
whole food requires more preparation than packaged convenience
food—taking time and energy that many don’t have in their already
busy lifestyles.
Enter the NutriBullet. More than a blender and more than a juicer,
the NutriBullet is a powerful nutrition extractor that uses patented
technology to transform nutrient-dense greens, vegetables, fruits, nuts,
seeds, and other healthful foods into silky-smooth, super-portable
NutriBlast smoothies. When enjoyed as a meal replacement or a snack,
NutriBlasts provide all the sustenance of whole fruits and vegetables—
fiber, pulp, seeds, and skins included—without any peeling, dicing,
slicing, or even chewing, saving you the time, energy, and cleanup
required of traditional food preparation.
Prioritising nutrition doesn’t have to be inconvenient. Create fast,
nourishing meals and snacks with the NutriBullet, and see what happens
when you start giving your body the fuel it deserves. We’re confident
you’ll be blasting for a long time to come.
NutriBullet
Long live you.
Loading...