NuTone RMIP33, RMIP45 Specification Sheet

Page 1
SPECIFICATION SHEET
36", 42", 48",
60"
4
4 1/2''
6 3/8''
HC0010
HK0076A
HB0032
HA0026
4
Adjustab
le depth
(See liner spec
sheet
fo
r details)
Fits custom hood nomina
l
width 36
”, 42”, 48”, 54
or 60
RMIP SERIES INSERT
Especially designed to be installed in custom hood fo r use ov er resid entia l com mercial-s tyle cooking surfaces.
A complete installation requires several optional components. Refer to page 2 when planning your installation.
FEATURES
Cabinet mount
Widths: 33’’, 45’’
Halogen lighting (33’’
PAR20)
Lamps not included
Controls: rocker switches for lighting and on-off,
knob for innite speed
Heat Sentry™ turns blower ON to HIGH speed when
excess heat is detected
OPTIONS
Custom hood liners (RML33 or RML45 Series):
Widths - 36’’, 42’’, 48’’, 54” and 60’’ Adjustable depth - see liner spec. sheet for details Stainless Steel construction - protects custom hood
base
and wipes clean easily
Dishwasher-safe stainless steel bafe lters RBFIP
Series
Backsplash (RMP Series):
Widths - 36’’, 42” 48”, 60” Stainless Steel construction - protects back wall and wipes clean easily
RMIP WC R em ot e control: Wi th S ta in le ss Steel
faceplate,
to t any décor.
INSERT SPECIFICATIONS
120 Vac, 60 Hz Amps (without blower): 0.8 (RMIP33) 1.3 (RMIP45)
REFERENCE QTY. REMARKS Project
_
custom application
_
2 x 50 watt; 45’’_ 3 x 50 watt
above cooking surface.
Custom Hood Liner
RML33 or RML45 Series
RMIPWC Remote Control
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
Bafe Filters
RBFIP Series
Backsplash
RMP Series
Location
Architect
Engineer
Contractor
Submitted by Date
70D 99043303E
Page 2
RMIP MOUNTING
HH0040A
1 1/2”
HD0093A
17 1/16''
16 3/8''
32 1/2'' or 44 1/2''
3 1/2''
2 1/4'' min.
HB0032
3/4’’
3 1/4’’
16 1/8’’
7 5/8’’
7/8’’
14’’
9 1/8’’
7/8’’ dia.
8’’ round transition
HK0031A
3/4’’
3 1/4’’
16 1/8’’
7 5/8’’
7/8’’
10’’
11 1/8’’
7/8’’ dia.
7’’ or 8’’ round transition
HK0030A
5 1/4’’
16 1/8’’
9 5/8’’ dia.
7/8’’ dia.
1 11/16’’
6 11/16’’
HK0029
3 1/4’’
22 1/8’’
13 5/8’’
7/8’’
3/4’’
15 1/8’’
14’’
7/8’’ dia.
8’’ round transition
HK0034A
3 1/4’’
22 1/8’’
13 5/8’’
7/8’’
3/4’’
17 1/8’’
10’’
7/8’’ dia.
7’’ or 8’’ round transition
HK0033A
5 1/4’’
22 1/8’’
12 11/16’’
1 11/16’’
9 5/8’’ dia.
7/8’’ dia.
HK0032
NOTE: If optional RML series liner is used, refer to installation
Size of the cut-out
instructions for size and location of the cut-out.
NOTE: The 3 1/2’’ notch must be cut only if the RMIPWC optional wall control will be installed.
RMIP SERIES INSERTS BLOWER DUCTING POSITIONS
Suggested Custom Hood Internal Framework
MODEL RMIP33 WITH P8 BLOWER (Vertical Outlet)
Top view
MODEL RMIP33 WITH P5 BLOWER (Vertical Outlet)
Top view
MODEL RMIP33 WITH 331H, 332H, 335, 336, HLB3, HLB6, HLB9 OR HLB11 BLOWER (Vertical Outlet)
Top view Top view
MODEL RMIP45 WITH P8 BLOWER (Vertical Outlet)
Top view
MODEL RMIP45 WITH P5 BLOWER (Vertical Outlet)
Top view
MODEL RMIP45 WITH 331H, 332H, 335, 336, HLB3, HLB6, HLB9 OR HLB11 BLOWER (Vertical Outlet)
Page 3
HL0067
RMP Series Backsplash
(Stainless Steel wall
covering with warming
shelves. Optional)
RML3336S, RML3342S, RML4548S, RML4554S or RML4560S Custom Hood Liner (optional)
Model 415
7” Rd adjustable
elbow (optional)
8” Rd adjustable elbow (optional)
Model 412
transition
(3
1
/4” x 10” to 7”)
Adapter and damper 3
1
/
4’’ x 10’’
(supplied with P5 and P8 blowers)
Adapter and damper 3
1
/4’’ x 14’’
(supplied with P8 blower)
Model P5
single-blower
(500 cfm)
RMIP33
OR RMIP45
INSERT
- RMIP33 AND RMIP45 INSERT SYSTEM -
INTERIOR BLOWERS
Flow deviator
(supplied with
P5 and P8 blowers)
Model 647
(7” Rd wall cap)
Model 634 or 644
(roof cap)
Model 643
(8” Rd wall cap)
8” Rd standard duct
Model 407
(7” Rd x 24’’
section)
7” Rd metal flexible duct
(optional)
8” Rd metal flexible duct (optional)
Model 413
transition
(3
1
/4” x 10” to 8”)
Model 459
transition
(3
1
/4” x 14” to 8”)
Model P8 dual-blower (900 cfm)
NOTE: The dual blower P8 can be
installed either with 7’’ round or 8’’ round ductwork. For optimal air and quiet sound performance,use 8’’ round ductwork.
Rough-in kit (supplied with P5 and P8 blowers)
RMIPWC
Wall control
(Optional)
RBFIP Series
Baffle Filters
(Optional)
Page 4
HL0068
RMP Series Backsplash
(Stainless Steel wall
covering with warming
shelves. Optional)
RML3336S, RML3342S, RML4548S, RML4554S or RML4560S Custom Hood Liner (optional)
Model 418
10” Rd
adjustable elbow
(optional)
Model HLB3 (280 cfm)
in-line blower
(includes one 8” to 10”
round transition)
RMIP33
OR RMIP45
INSERT
- RMIP33 AND RMIP45 INSERT SYSTEM -
IN-LINE AND EXTERIOR BLOWERS
Model 331H (600 cfm)
or 332H (900 cfm)
exterior blower
Model 335 (1200 cfm)
or 336 (1500 cfm)
exterior blower
Model 441
(10” Rd wall cap)
Model 437
(High capacity roof cap)
Model 441
(10” Rd wall cap)
Model 421 (10” Rd. vert. in-line damper) Recommended for use with exterior blowers
Model 410 (10” Rd duct
- 2ft. sections)
10” Rd metal
flexible duct
(optional)
332KR in-line and exterior blower rough-in kit - Purchase separately.
RMIPWC
Wall control
(Optional)
RBFIP Series
Baffle filters
(Optional)
Model HLB6 (600 cfm)
in-line blower
(includes two 4½” x 18½”
to 10’’ round transitions)
Model HLB9 (800 cfm)
or HLB11 (1100 cfm)
in-line blower
(includes two 8” x 12” to
10’’ round transitions)
Loading...