NuTone RMIP33, RMIP45 Specification Sheet
SPECIFICATION SHEET
36", 42", 48",
60"
4
4 1/2''
6 3/8''
HC0010
HK0076A
HB0032
HA0026
4”
Adjustab
le depth
(See liner spec
sheet
fo
r details)
Fits custom hood nomina
l
width 36
”, 42”, 48”, 54
”
or 60
”
RMIP SERIES
INSERT
Especially designed to be installed in custom hood
fo r use ov er resid entia l com mercial-s tyle
cooking surfaces.
A complete installation requires several optional
components. Refer to page 2 when planning your
installation.
FEATURES
• Cabinet mount
• Widths: 33’’, 45’’
• Halogen lighting (33’’
PAR20)
Lamps not included
• Controls: rocker switches for lighting and on-off,
knob for innite speed
• Heat Sentry™ turns blower ON to HIGH speed when
excess heat is detected
OPTIONS
• Custom hood liners (RML33 or RML45 Series):
Widths - 36’’, 42’’, 48’’, 54” and 60’’
Adjustable depth - see liner spec. sheet for details
Stainless Steel construction - protects custom hood
base
and wipes clean easily
• Dishwasher-safe stainless steel bafe lters RBFIP
Series
• Backsplash (RMP Series):
Widths - 36’’, 42” 48”, 60”
Stainless Steel construction - protects back wall
and wipes clean easily
• RMIP WC R em ot e control: Wi th S ta in le ss Steel
faceplate,
to t any décor.
INSERT SPECIFICATIONS
120 Vac, 60 Hz
Amps (without blower): 0.8 (RMIP33) 1.3 (RMIP45)
REFERENCE QTY. REMARKS Project
_
custom application
_
2 x 50 watt; 45’’_ 3 x 50 watt
Mount insert so bottom of custom hood is 24’’ to 30’’
above cooking surface.
Custom Hood Liner
RML33 or RML45 Series
RMIPWC Remote Control
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-800-543-8687)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
Bafe Filters
RBFIP Series
Backsplash
RMP Series
Location
Architect
Engineer
Contractor
Submitted by Date
70D 99043303E
RMIP MOUNTING
HH0040A
1 1/2”
HD0093A
17 1/16''
16 3/8''
32 1/2'' or 44 1/2''
3 1/2''
2 1/4'' min.
HB0032
3/4’’
3 1/4’’
16 1/8’’
7 5/8’’
7/8’’
14’’
9 1/8’’
7/8’’ dia.
8’’ round
transition
HK0031A
3/4’’
3 1/4’’
16 1/8’’
7 5/8’’
7/8’’
10’’
11 1/8’’
7/8’’ dia.
7’’ or 8’’
round transition
HK0030A
5 1/4’’
16 1/8’’
9 5/8’’ dia.
7/8’’ dia.
1 11/16’’
6 11/16’’
HK0029
3 1/4’’
22 1/8’’
13 5/8’’
7/8’’
3/4’’
15 1/8’’
14’’
7/8’’ dia.
8’’ round
transition
HK0034A
3 1/4’’
22 1/8’’
13 5/8’’
7/8’’
3/4’’
17 1/8’’
10’’
7/8’’ dia.
7’’ or 8’’
round transition
HK0033A
5 1/4’’
22 1/8’’
12 11/16’’
1 11/16’’
9 5/8’’ dia.
7/8’’ dia.
HK0032
NOTE: If optional RML series liner is used, refer to installation
Size of the cut-out
instructions for size and location of the cut-out.
NOTE: The 3 1/2’’ notch must be cut only if the RMIPWC
optional wall control will be installed.
RMIP SERIES INSERTS
BLOWER DUCTING
POSITIONS
Suggested Custom Hood Internal Framework
MODEL RMIP33 WITH P8 BLOWER (Vertical Outlet)
Top view
MODEL RMIP33 WITH P5 BLOWER (Vertical Outlet)
Top view
MODEL RMIP33 WITH 331H, 332H, 335, 336, HLB3,
HLB6, HLB9 OR HLB11 BLOWER (Vertical Outlet)
Top view Top view
MODEL RMIP45 WITH P8 BLOWER (Vertical Outlet)
Top view
MODEL RMIP45 WITH P5 BLOWER (Vertical Outlet)
Top view
MODEL RMIP45 WITH 331H, 332H, 335, 336, HLB3,
HLB6, HLB9 OR HLB11 BLOWER (Vertical Outlet)
Loading...