NuTone BN200 Operating Instructions Manual

DELUXE ELECTRIC

POWER BRUSH

HOMEOWNERS OPERATING INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

AB0008

MODEL: BN200

FOR HOUSEHOLD USE ONLY

Broan-NuTone Canada Inc.; Mississauga, Ontario www.broan.ca or www.nutone.ca

877-896-1119

Register your product online at: www.broan.ca or www.nutone.ca

!

!

BN200d100707

- 2 -

When using an electric appliance, basic precautions should always be followed,
including the following:

READ ALL INSTRUCTIONS BEFORE USING THE POWER BRUSH.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY:

1. Always turn power off and unplug before cleaning or servicing the power brush.

2. Do not

pick up the following items: sharp objects, flammable liquids, hot

ashes, burning matches, cigarettes, etc.

3. Never

use, connect or disconnect the power brush with wet hands.

4. Do not use with damaged power plug or plug pins. If the power brush is not
working properly, contact your local supplier or service agent. The problem
may be covered under the warranty.

5. Do not

put objects into the brush opening.

6. Do not use with brush opening or air channel blocked. Keep free of dust, hair, etc.

7. Keep hair, loose clothing, fingers or any other parts of the body away from
moving parts.

8.Never

leave electric power brush unattended while it is plugged in.

9. This is not a toy. Do not let children play with power brush. Children should
be supervised when near the power brush.

10. Use only manufacturer’s recommended attachments.

11. Do not

use outdoors or on wet surfaces.

12. Do not use to pick up water.

13. Use extra care when cleaning stairs.

14. Always check underside of product for any obstructions prior to use.

15. Do not

use without dust bag or cyclonic filter in place in power unit.

16. Motor shaft can become hot during normal use. To prevent burns, avoid
touching the motor shaft when servicing the drive belt.

17. Keep your work area well lighted.

18. When servicing or cleaning the unit, it is recommended to wear safety glasses
and gloves.

19. Store your cleaner indoors in a clean, dry area.

!

IMPORTANT SAFETY INSTRUCTIONS

The instructions given in this booklet serve as a guide to routine maintenance. To
obtain the most satisfying years of service, read through these instructions and
keep them handy for future reference.

HOSE HANDLE TO WAND CONNECTION

1. HOW TO ASSEMBLE POWER BRUSH/WAND/HANDLE

1. Read important safety instructions before installing power brush.

2. Ensure hose is disconnected from
power supply before installing power
brush.

3. Push wand into power brush neck so
that the lock button snaps in place.

4. Connect hose handle into wand quick
connector and ensure that the prongs
are aligned with the receptacle holes.
Push until lock button snaps in place.

HOSE
HANDLE

POWER

BRUSH

LOCK

BUTTON

LOCK BUTTON

POWER BRUSH

NECK

WAND TO POWER BRUSH CONNECTION

HEIGHT

ADJUSTMENT

PEDAL

PRONGS

LOCK

BUTTON

LOCK

BUTTON

HOSE
HANDLE

PRONGS

WAND

WAND

- 3 -

RECEPTACLE

RECEPTACLE

WAND

GRIP

WAND

RELEASE

PEDAL

POWER BRUSH

NECK RELEASE

PEDAL

HOSE HANDLE

RELEASE BUTTON

QUICK
CONNECTOR

AO0019

AO0020

AO0021

WAND & HOSE COMPATIBILITY

See section 5 on page 7

for wand and hose
compatibility table.

?