NuTone 8870 User Manual

INSTALLATION

• Not for use in kitchens.

• Wall sleeve assembly is installed during rough-in stage of construction. Removable outlet box may be wired at rough-in stage and may be mounted behind plaster or drywall. Includes three (3) wiring knockouts.

• Motor and blade assembly installs quickly over screws mounted on sleeve. Spring-operated aluminum backdraft damper opens automatically when fan is turned on; closes quietly when unit is turned off. Grille installs with thumbscrew provided.

• Features weather seal when fan is not operating. Timer switch sold separately.

• Installation instructions included with each unit.

CERTIFIED TEST DATA

HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in AMCA's state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements. This NuTone model is listed by Underwriters' Laboratories Inc.

Architectural & Engineering Specifications

March 2004

Through-the-Wall

Fan

MODEL: 8870

DESCRIPTION

• For baths up to 75 sq. ft.

• UL listed for use in tub/shower enclosures when used

with GFI branch circuit wiring.

• Telescoping 7" diameter sleeve allows exact fit through

wood or masonry walls from 4" to 9" thick. Required cutout: 7

⁄8" diameter.

• Louvered grille; all-aluminum exterior parts eliminate

maintenance.

• Switch operated: turn fan on and aluminum spring-sealed

damper opens automatically; provides weather seal when fan is not operating.

• Refer to NuTone's catalog for a complete listing of

accessories to effectively adapt this Fan to your construction requirements.

DESIGN FEATURES

Air Delivery: 80 CFM. Sound Level: 6.0 Sones. Dimensions: Grille: 8

⁄16" x 91⁄2".

Outside Sleeve: 6

⁄

" ID x 5

⁄

Flash Plate: 10" square Hood Extension: 57⁄16" from wall.

Material & Finish: Grille: White polymeric, pebble-grain

finish.

Inside Sleeve:

Galvanized steel.

Outside Sleeve: Aluminum. Flash Plate & Hood Assembly:

Aluminum.

Motor: Plug-in, Thermally protected.

Fan Blade: One-piece polymeric, 5-leaf.

Electrical Rating: 120v, 60Hz, 1.5Amp

ARCHITECT'S SPECIFICATIONS

Through-the-Wall Fan shall be NuTone Model Number 8870 as manufactured by NuTone according to listed specifications. Unit shall ventilate 80 CFM at .03" S.P. at a sound level of 6.0 Sones. Unit shall be equipped with aluminum flash plate and hood and includes adjustable telescoping 7" diameter wall sleeve.

8870

DIMENSIONAL DRAWING

10" SQ.

9" SQ.

⁄16"

SPRING-OPERATED BACKDRAFT DAMPER

⁄2"

⁄

GRILLE

MOTOR/BLADE ASSEMBLY

Product specifications subject to change without notice.

NuTone, Inc., 4820 Red Bank Road, Cincinnati, Ohio 45227

Printed in U.S.A.