Nutek UT0A Users Manual

Operators Manual for the TR4 Transmitter

The TR4 is an extremely easy transmitter to use. The following will explain each of the button functions of the
transmitter.

Button 1 :Arm/Disarm

Pressing this button for 1 second will indicate to your receiver to arm your home security panel. Pressing this button
again will indicate to the receiver that you wish to disarm your panel.

Button 2: Panic

Pressing this button for 1 second will indicate to your receiver to send a panic signal to your home security panel.

Button 3: Garage/Door

Pressing this button for 1 second will indicate to your receiver to send an open garage./door signal to your home
security panel.

Button 4: Medic Alert

Pressing this button for 1 second will indicate to your receiver to send a medic alert signal to your home security
panel.

NOTE: Pressing any button for 3 seconds will generate a PANIC alarm signal.

Your transmitter also has the capability to send a battery low condition to your receiver unit. This signal will be
generated when pressing any of the 4 transmitter buttons.

1