Thank you for your SiriusXM Satellite Radio purchase! This product was developed using Bluetooth® Streaming Audio technology to connect to
your vehicle's Bluetooth® enabled radio. This system was professionally installed and includes a pairing button mounted in your vehicle's glove
compartment.
All radio controls will operate in a similar manner as other paired Bluetooth® Streaming Audio devices, and will display your SiriusXM channels as
tracks. The current channel will always be shown, along with the artist and song title. There are 2 types of radios that this system was designed
to work with - Type I and Type II. Please reference the appropriate section of this owner's manual that best matches the radio in your vehicle.
Note: The SiriusXM Satellite Radio is a paired Bluetooth® device in your radio's paired device list. It was paired and connected during the
installation process. This product is designed to stay paired to your radio even if the battery is disconnected. This device must be paired again to
the radio if it is accidentally deleted from the device list, or if the radio is replaced or serviced. The pairing procedure is described in this manual.
OPERATIONAL STATEMENT
While the steering wheel mounted audio controls (if equipped) will provide limited functionality with the SiriusXM Device, actual operation of
the steering wheel mounted audio controls will vary from vehicle to vehicle and operation cannot be guaranteed. This is due to the vehicle's
design and not due to a defect or malfunction in the SiriusXM Satellite Radio device.
Due to the operation of the factory radio, prioritizing devices in the paired device list is not available. This may result in the radio pairing with
other devices such as cell phones, audio players, or tablets when the radio is turned on. This may occur even if the last device being used was
the SiriusXM Satellite Radio. This is an operating charactaristic of the radio and not a defect or malfunction of the SiriusXM Satellite Radio
Device. If this occurs, please reference page 7 or 17 for information to connect the radio to the SiriusXM Satellite Radio.
Due to the operation of the factory radio, text elds may be slow to refresh while changing channels quickly. This is a normal operating
charactaristic of the factory radio. It is recommended to use the "Browse" menu to search for channels by category for quicker response. Please
reference page 9 or 19 for more information on using the "Browse" menu.
Radio images in this manual are provided for reference and for informational purposes only. The actual radio displays may vary from vehicle to
vehicle, and this manual may not represent the actual menu and displays of the radio in any particular vehicle.
3
ACTIVATING YOUR SUBSCRIPTION:
You should be able to hear the SiriusXM preview channel on Channel 1. If you cannot hear the preview channels, please visit your
local dealer for troubleshooting. Note that the vehicle must be outside and the antenna must have a clear view of the sky to be
able to receive a signal.
After you can hear the Preview channel, tune to Channel 0 to nd the Radio ID of your tuner. You will need this number to activate
your subscription. Write this number down for reference.
Note: the SiriusXM Radio ID does not include the letters I, O, S, or F.
In the USA, you can activate online or by calling SiriusXM Listener Care:
•Visit www.siriusxm.com/activatenow
•Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions, please contact:
•Visit www.siriusxm.ca/activatexm
•Call XM Customer Care at 1-877-438-9677
As part of the activation process, the SiriusXM satellites will send an activation message to your tuner. When your radio detects
that the tuner has received the activation message, your radio will display: "<<Subscription Updated>>". Once subscribed, you
can tune to channels in your subscription plan. Note, the activation process usually takes 10 to 15 minutes, but may take up to an
hour. Your radio will need to be powered on and receiving the SiriusXM signal to receive the activation message.
4
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any change or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
5
TYPE I RADIO
Volume
Audio
Car
Setup
Bluetooth Audio
Select Device
Browse
SiriusXM
Preview Channel
Channel 1
II
6
Source
Sound
Tune
V
Seek
Track
V
SELECTING SIRIUSXM FROM THE DEVICE LIST:
Select Audio Source
1. Access the Bluetooth® Streaming Audio source in the
vehicle's factory radio.
2. Press the "Select Device" button to display the list of
currently paired devices.
3. Find the "SiriusXM" device in the paired device list.
4. To the right of the label you will see an icon that looks like a
music note. Press this icon to select SiriusXM.
Note: If you wish to use another device to stream content into the radio
via Bluetooth®, use the same procedure to select the alternate device. This
will not remove the SiriusXM from the paired device list, and you can return
to listen to SiriusXM content at any time by following the steps above (see
page 14).
5. The main SiriusXM screen will now display. (See page 8 for
more information)
Bluetooth®
Streaming
Audio source
Select
Device
AMFM
Audio
Bluetooth Audio
Select Device
Browse
Bluetooth Setup
SiriusXM
Mobile Phone
Reorder
II Sound
Source
Select
SiriusXM
Add
System Settings Remove
7
OVERVIEW OF CONTROLS:
•Use the "Tune" knob or Track ^/v buttons to select channel
up or down.
Volume
Up or Down
Bluetooth®
Button
Tune Channel
Up or Down
•The "Tune" knob can also be used to navigate through the
radio's menus.
•Use the "Volume" knob to adjust volume.
•Press the "Browse" button to access the main menu.
•Press the "Bluetooth®" button to access the preset list.
•Use the "Sound" button to adjust the sound settings (Bass/
Treble/Balance/Fade/etc.)
•"II" (Pause) Button - No Function for SiriusXM content.
Actual screens and button conguration may dier from vehicle
to vehicle.
Display Paired
Device List
Main Menu
Volume
Audio
Car
Setup
Bluetooth Audio
Select Device
Browse
SiriusXM
Preview Channel
Channel 1
II
Source
Sound
No FunctionAdjust Sound Settings
Tune
Seek
Track
V
V
8
BROWSE MENU:
1. Press the "Browse" button on the main screen.
2. This will bring up the option for
Current Category
Categories (browse)
Store Preset
Recall Preset
SiriusXM Radio ID
3. Pressing the "Categories" button will bring up a category
list. To select a channel to listen to from a specic category, use
the "Scroll" arrows to bring up the desired category. Once the
desired category appears, touch it to select it.
4. Once selected, a list of all the channels within the selected
category will appear. Select the desired channel within the
category and it will tune the radio to that channel.
Note: At any time, pressing the (Return) button will
return to the previous menu/screen.
Return to
Category
List
Select from the list
Current Category: Rock
Categories
Store Preset
Recall Preset
SXM Radio ID: 1234ABCD
Select from the list
Pop
Rock
Hip-Hop
R&B
Dance/Electronic
Select from the list
Now Playing
Now Playing
^
^
^
^
^
^
^
^
Scroll
Ch2: Hits 1
Ch3: Venus
Ch4: 40s on 4
Ch5: 50s on 5
Ch6: 60s on 6
Now Playing
^
^
^
^
9
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.