Nutek ATIF Users Manual

professional

series

Owner’s Guide

PROCOMP

Deluxe Vehicle Security and Remote

Start System with 900 Mhz 2 Way

Confirming OLED Remote Control

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR

SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.

Table of Contents

Using Your Remote Control ............................................................... 3

Using the 2 Way Remote Control for the First Time ........................ 3

Arming the Security System ............................................................ 3

Bypassing the Shock Sensor .......................................................... 3

Disarming the Security System ........................................................ 4

Two Stage Door Unlock (optional) ................................................... 4

Eliminating Arm / Disarm Notification Chirps ....................................4

Using the Progressive Car Finder Feature ...................................... 4

Using the Personal Protection Alarm ............................................... 4

Activating Trunk Release (optional) ................................................ 5

Activating Optional AUX 1 (optional) ............................................... 5

Activating Optional AUX 2 (optional) ............................................... 5

Activating Optional AUX 3 (optional) ............................................... 5

Activating Optional AUX 4 (optional) ............................................... 5

Turning On the Vehicle’s Headlights ............................................... 5

Valet Mode ........................................................................................ 6

2 Car Mode ........................................................................................ 6

Manually Overriding the Security System ....................................... 6

Programming Your Personal Override Code ................................... 7

Using Your Remote Vehicle Starter ................................................. 8

Remote Starting Your Vehicle .......................................................... 8

Entering Your Vehicle while it is Running via Remote Start ........... 8

Preheating or Precooling the Vehicle’s Interior ............................... 8

Using the “Quick-Stop” Feature ....................................................... 8

Turbo Timer Mode (optional) ............................................................ 9

Operating the Daily Start Timer ........................................................ 9

Operating the 2 / 4 Hour Start Up Timer Mode .............................. 10

Manual Transmission Mode ........................................................... 11

Fuel Saver Mode ............................................................................ 11

Temp Start ....................................................................................... 11

Remote Start Valet Mode ................................................................ 12

Remote Start Safety Features .......................................................12

Additional 2 Way OLED Remote Control Features ...................... 13

Activating 1 Way Remote Control Features ................................. 15

Activating 2 Way Remote Control Features ................................. 17

LED and Siren/Horn Indications ....................................................... 21

Replacing Remote Control Batteries ............................................. 22

Warranty Information ......................................................................... 23

Using Your Remote Control

Using the 2 Way Remote Control for the First Time.

The 2 way remote control has been shipped in Battery Save Mode to conserve battery power and will be necessary for you to turn off battery save mode before using the remote for normal operation. It is also recommended that you fully charge the battery before use. Refer to the additional 2 way remote control features section of this manual for details.

Arming the Security System

To arm the system, exit the vehicle, close all doors, then press the button. The parking lights will flash 2 times, indicating the system is armed, has locked the doors (if equipped and connected) and activated the starter disable feature. The LED status indicator will blink steadily, once per second.

NOTE: The system is defaulted with Silent Choice enabled, which requires a second press of the button to activate an audible arming response from the vehicle.

Bypassing The Shock Sensor

There are 3 additional modes of operation in which your system will react to the shock sensor, FULL TRIGGER ONLY, ALL OFF, or CITY MODE.

Standard Shock - Press once to arm the system, the shock sensor will be fully active.

Full Trigger Only - Pressing & together within 5 seconds will set the system to Full Trigger Only in which the system will ignore the light touch setting.

All Off - Pressing & again within 5 seconds will set the system to All Off. In this mode the system will not react to the shock sensor and the 2 way LCD remote will display the shock sensor icon.

City Mode - Pressing & again within 5 seconds will set the system to City Mode. In this mode the light touch horn output is extended to a full 10 seconds and full trigger horn output is shortened to 15 seconds, no icon is displayed.

NOTE: The system will only change the shock sensor setting for one arm cycle and will be defaulted back to normal operation the next time the system is armed.

*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more than 2 seconds.

Disarming the Security System

To disarm the system press the button. The parking lights will flash 1 time, indicating the system is disarmed and has unlocked the doors (if equipped and

connected).

NOTE: The system is defaulted with Silent Choice enabled, which requires a second press of the button to activate an audible arming response from the vehicle.

Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the button one time will

unlock only the driver’s door. Press again to unlock the remaining doors.

Eliminating Arm / Disarm Notification Chirps

System ARM/DISARM chirps can be toggled ON or OFF without entering the programming feature banks.

1. Turn the ignition ON then OFF.

2. Press and release the valet/programming button 3 times. The system will respond with 1 chirp for ON or 2 chirps for OFF.

Using the Progressive Car Finder Feature

Use the car finder feature to locate your vehicle. The system will sound 5 times at low volume, increasing in volume each time the button is pressed.

1 Way Transmitter - Press and release .

2 Way Transmitter - Press and release + .

Using the Personal Protection Alarm (Panic)

Press and hold the button(s) shown below for 3 seconds to activate the personal protection alarm . During panic mode, the normal function of the transmitter buttons

will be suspended. The transmitter’s and buttons can be used to lock and unlock the door (if the option is installed). To stop the alarm, press and hold the

button(s) on the transmitter again for 3 seconds. The system will automatically stop after 30 seconds.

1 Way Transmitter - Press and hold for 3 seconds.

2 Way Transmitter - Press and hold + for 3 seconds.

Activating the Trunk Release Feature (Optional)

If this feature is enabled on your system, pressing and holding the button for 3 seconds will open the vehicle’s trunk or hatch.

Activating Optional AUX 1 (Optional)

This feature can be programmed for a wide range of functions like power window or sunroof automation, please consult your installing dealer to determine the functionality of your system.

1 Way Transmitter - Press and hold for 3 seconds.

2 Way Transmitter - Press and hold + for 3 seconds.

Activating Optional AUX 2 (Optional)

This feature can be programmed for a wide range of functions like power window or sunroof automation, please consult your installing dealer to determine the functionality of your system. Press and hold + for 3 seconds to activate.

Activating Optional AUX 3 (Optional)

Activating Optional AUX 4 (Optional)

This feature can be programmed for a wide range of functions like power window or sunroof automation, please consult your installing dealer to determine the

functionality of your system. Press and hold + for 3 seconds to activate.

Turning on the Vehicle’s Headlights (Optional)

If this feature is enabled on your system, pressing and holding the button for 3 seconds will turn on the vehicle’s headlights for 30 seconds. Press and hold again for 3 seconds to turn off the headlights prior to the 30 second time limit.

Valet Mode

To engage valet mode:

1. Turn the ignition key to the ON position.

2. Press and hold the valet button for 5 seconds.

3. The LED will light solid indicating that the system is in valet mode.

When valet mode is activated the status LED will light solid, and all security functions will be disabled.

To disengage valet mode:

1. Turn the ignition key to the ON position.

2. Press and release the valet button.

3. The LED will turn off indicating that the system has exited valet mode.

2 Car Mode

It is possible for your remote transmitter to control 2 vehicles provided the both are equipped with compatible security or remote start systems and your transmitter has been programmed to the additional vehicle’s system. To operate the additional vehicle you must first enter 2 car mode from the remote control. Once in 2 car mode, the remote control will operate only the second vehicle, the original vehicle will have no response from the remote. To enter or exit 2 car mode, refer to the transmitters advanced functions menu section of this manual.

Manually Overriding the Security System

If your transmitter is lost or disabled, it will be necessary use the emergency override button to turn the security system off. There are two types of emergency override procedures. Check with your installing dealer to find out what has been activated on your system.

Standard Emergency Override Procedure:

1. Open the vehicle door. The alarm will sound.

2. Turn the ignition key to the ON position.

3. Within 5 seconds, press and release the valet button.

The alarm system will stop sounding and enter the (by-passed) mode. You can now start and operate the vehicle normally.

Coded Emergency Override Procedure:

The system has an optional override mode that allows you to program a 2 digit personal code using the emergency override button offering a higher level of security. This feature must be enabled by your installing dealer, the default override code is 11.

1. Enter the vehicle (the security system will trigger).

2. Turn the ignition switch to the ON position.

3. Within 5 seconds press the valet button the number of times corresponding to the first digit of your personal code (Default digit is

1).

4. Within 5 seconds turn the ignition key OFF, then ON.

5. Within 5 seconds press the valet button the number of times corresponding to the second digit of your personal code (Default digit is 1).

6. Within 5 seconds turn the ignition key OFF, then ON.

7. If entered correctly the security system will turn off.

8. Turn the ignition key to the OFF position.

Programming Your Personal Override Code

1. Make sure the security system is disarmed.

2. Turn the ignition key to the ON position.

3. Within 10 seconds press and release the valet button 3 times.

4. Within 10 seconds turn the ignition key OFF then ON 3 times (The horn will honk and the lights will flash 1 time).

5. Within 10 seconds press and release the valet button the number of times corresponding with the first digit of your personal code (1-9).

6. Within 10 seconds turn the ignition key OFF then ON.

7. Within 10 seconds press and release the valet button the number of times corresponding with the second digit of you personal code (1-9).

8. Within 5 seconds turn the ignition key OFF.

9. You will notice the LED flash a number of times corresponding with the code you entered.

Note: If 15 seconds of inactivity passes the system will abort programming.

Note: Do not lose your “Personal Override Code”. Reprogramming a new code without the original code can only be performed by an authorized dealer.

Using Your Remote Vehicle Starter

Remote Starting Your Vehicle

To activate the remote vehicle start function, press and release the button 2 times within 2 seconds. The system will sound, the parking lights will flash 1 time and the system will check the vehicle to ensure it is safe to start. If all safety parameters are correct, the vehicle will start within 5 seconds. The vehicle’s parking lights will turn on (or flash depending on system settings) as a visual indication that the vehicle has started and is running. Press and hold the button for 3 seconds to turn the vehicle off.

If your vehicle stalls or does not start, the system will pause 3 seconds, then try 3 more times to start the vehicle (a total of 4 attempts). The system will pause 3 seconds between each start attempt. If the vehicle does not start after the 4th attempt, the system will abort the remote vehicle start process.

Entering the Vehicle while it is Running via Remote Vehicle Start

1. Unlock the vehicle’s doors.

2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!

3. Insert the key into the ignition switch and turn to the ON or RUN position.

4. Press the brake pedal. The remote vehicle starter will disengage and the vehicle will operate normally.

Preheating or Precooling the Vehicle’s interior

Before exiting the vehicle, set the temperature controls to the desired setting and operation. After the system starts the vehicle, the heater or air conditioner will activate and heat or cool the vehicle’s interior to your setting.

Using the “Quick-stop” Feature

If you want to make a short stop and keep your vehicle running (to keep the interior warm or cool), the quick-stop feature allows you to do this while keeping your vehicle secure and your keys with you.

To engage quick stop:

1. Stop the vehicle and place the transmission in PARK.

2. With your foot off the brake pedal, press and release the button 2 times within 2 seconds. The LED will flash 3 times to confirm quick stop is entered. If your vehicle has a manual transmission, set the parking brake after this step to prevent activating manual transmission ready mode.

3. Remove the keys from the ignition and exit the vehicle. Press the button to lock the vehicle’s doors if desired.

NOTE: Do not leave children or animals unattended in the vehicle when using the quick-stop feature.

+ 16 hidden pages

Nutek ATIF Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual