Nuova Kiara 6 User Manual
Nuova Distribution USA, LLC
6940 Salashan Parkway Building A • Ferndale WA 98248
www.nuovadistribution.com • (p) 360.366.2226 • (f) 360.366.4015
Kiara 6 Pre-Installation Checklist
Water Requirements
• 3/8” dedicated hot water (140 degrees) line with
shut-off valve and compression fitting.
• Water hardness cannot exceed 3gpg or 50ppm. If
water hardness exceeds 3gpg a water softener must
be installed.
• Minimum incoming water Flow Rate of 35 GPH and
maximum line pressure 70 PSI / 5 BAR.
Water Softening Equipment
1. Water Softener Capacity: Single - 4400 gpg
2. Water Softener Capacity: Double - 8800 gpg
3. Water Softener Capacity: Triple - 13200 gpg
4. Water Softener: Automatic - Programmable
5. Water Softener Capacity: Manual - 4400 gpg
Water Softener/Maintenance Calculation:
NSF/ANSI Std.3
Power Requirements
• Volts: 220 (voltage range of 208–240)
• Watts: 4750
• Amp draw: 22
• Receptical: Nema L6-30 Twist
Nema L6-30 Twist
Cartridge Grain
Capacity
________________ ÷ ________________ = ________________ ÷ ________________ = ________________
÷ Water Hardness
Grains-per-Gallon
= Gallon Capacity of
Cartridge
÷ Gallons Used per
Day
= Days Until
Replacement
Cartridge
Counter-Space Requirements
• 32 inches (height)
• 25 inches (depth)
• 23 inches (width)
• 2 ½ Inch Drain Hole
Drain Requirements
• Open gravity drain of minimum
1.25 inch I.D., with in 4 feet of machine.
• Drain must be 24” above ground (see diagram)
I the customer understand that these requirements must be in when the installer arrives. Failure to have the site ready will
result in additional service and travel charges, and may cause further delays in installation.
24 inches
25 inches
23 inches
32 inches
Customer Name: ____________________________________ Signature: ________________________________________
Company Name: ________________________________________________________________________________________
Phone: __________________________ Fax: __________________________ E-mail: __________________________
Version 2.2
Loading...