Smart Watch
Model:G12
USER’S MANUAL
Thank you for choosing our smart band. You can read this
manual thoroughly to understand the use of the equipment
and how to do it simply. The Company reserves the right to
make changes to the contents of this manual without prior
notice without prior notice.
Product configuration:
1. Smart Watch * 1
2. Data cable* 1
3. Manual * 1
● Pair with the phone
Appstore Google Play
1: IOS, Android users scan the following QR code through
your mobile browser to download the APP.
2: Android phone users search: "Hplus " in Google Play Store
to download ,and IOS users download the application in App
Store please.
Open the "Hplus" applicationsettings-Bluetooth-Search ”SmartDevice” and connect
When the Bluetooth icon on the watch is blue,means
connected success, while red for unconnected.
● Charging instructions
Magnetic charging, as shown in the picture below. Please
note direction of charging cable.
*Please note that two contacts of the charging cable can’t contact
electric conductor at the same time, otherwise it will cause circuit
burning.
● Step count
There are three data: distance/step/calorie, click touch key to
enter next page
Step count is on 24/7 and returns to zero after storing the
data before 12am and counts again.
● Heart rate monitoring
Enter the heart rate interface to start measuring,
The heart rate is a dynamic heart rate test, and the measurement
is stopped when exiting.
If your heart rate doesn't show up or the display is unstable,
you can try the following:
• Clean your wrists and keep them dry before wearing the
device.
• Avoid wearing sunscreen on the part where the watch is worn
• Wear the watch on your wrist and tighten it.
●Sleep monitoring
Enter to view the quality of sleep.
●Exercise
The exercise mode has multiple motion modes to choose from.
Select long-press touch key to enter the exercise.
Press the touch key to record the number of laps during exercise
Press the Return key to pause to select <Save> <Delete>
<Continue> long press the touch key to confirm
●Information
Enter the information notification to view the last five messages
or notifications.
● Dial
Enter and select dial
● Setting
Enter and set vibration switch
Brightness adjustment (low, medium and high)
Reset (switch)
About (can view MAC address, firmware version number)
●FAQ
*Do not expose this device to overcooling or overheated conditions for a
long time, otherwise it will cause permanent damage.
*Why can’t wear watch when taking a hot bath?
As bath water temperature is high, it will generate mass steam which is
in gaseous phase and characterized by small molecule radius. It is easy
to penetrate through watch housing gap. When temperature lowers, it
will become liquid phase water drop, which is easy to cause short circuit
in the watch, resulting in damaged circuit board and watch.
*The watch can’t start up or charge
If your newly received watch can’t start up, it maybe because battery is
under protection due to collision during watch transportation. Plug in
charging cable to activate the watch.
If your watch can’t start up due to too low battery or the watch has not
been used for a long time, please plug in USB cable and charge for half
an hour for activation.
Warranty
1. If it appears quality problems caused by manufacturing, materials,
design within one year（since the day of purchase）, we will offer free
warranty for. We will offer free warranty for battery and adapter within 6
months. Premise is using normally and correctly.
2. About the fault caused by the users personal reasons, we don't offer
free warranty, as follows:
1). Disassemble or refit the product.
2). Caused by immodesty drop
3). All artificial damage or misuse (such as: make water into the host, the
external force shatter, scratch damage of peripheral components, etc.),
all these are beyond the scope of the warranty.
3. When ask for free warranty, you must provide a warranty card with the
seal of purchase place and purchase date.
4. If you met problems during use, please contact the shop customer
service which you bought from.
5. Please make the final products as the standard.
Date of purchase:
IMEI code:
Buy store:
Customer signature:
Clerk Signature:
Shop stamp:
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to pr ovide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate
this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without
restriction.
Loading...