Numatic Henry Spraymop User manual

A Professional Microfibre Floor Cleaning System
The 40cm/16” Spraymop has been designed to provide highly efficient performance with the minimum of effort, ensuring a high standard of floor cleaning in the shortest period of time.
In the majority of applications the mop will always be used “Damp Wet”, not too wet and not too dry, so that all surfaces are actually wiped clean. The NyloStripe mop head is a dual function operational design with the active stripes cleaning the floor surface, while the white fabric holds the accumulated dirt.
Before starting your cleaning, remove the elastic pocket mop head from the mop holder, rinse under the tap and wring out until Damp Wet and refit to the mop holder.
Fill the spray bottle with water and, with the damp mop fitted, mop the floor normally. For extra performance you can add a small amount of floor cleaner or disinfectant to the bottle which will improve cleanliness, aroma and hygiene... three jobs done instead of one!
Due to the high performance cleaning characteristics of NyloStripe, floors can be cleaned without any added chemicals - NyloStripe and water do a excellent job.
629143 - Microfibre NyloStripe
(1) Mops can easily be washed as necessary by hand or machine at 60°C max. DO NOT use fabric conditioners, softeners, bleach or bleach agents as this damages the micro fibres. (2) Do not leave mop head immersed in water, always leave to dry naturally. (3) Although the NyloStripe mop is a professional specification, please replace when signs of wear are evident. (4) Because the Henry Spraymop is so easy and fast to use, and the mop head is only damp, floors will dry very quickly - so regular mopping is better than a once a week marathon.
The Henry Spraymop provides a quick and effective floorcare system to professional standards.
Model Bottle Pad Weight Size
HM40 400ml 40cm 1Kg 1400mm
When using the mop you will soon see when added dampness is required and, at this point, a couple of pumps of the pump action s pray will be all that is needed. Soak the liquid on the floor into the fabric mop head to keep it damp and keep on mopping. Repeat as necessary, until the whole area to be cleaned is completed.
If you are cleaning a large area that is heavily soiled, rinse out the mop head under a tap as necessary.
Mop Tips
Numatic International Limited, Chard, Somerset, TA20 2GB
Telephone: 01460 68480 Fax: 01460 68560
• Sales- Tel: 01460 68600 Fax: 01460 68458
www.numatic.co.uk © Numatic International Limited 2008
233471/0408A
Loading...