NT ware Systemprogrammierung URSHID01, URSPLUS01, URSHITAG01, URSMULTI01 User Manual

uniFLOW Release Station

Installation & Configuration

Versioning

Version

Date

Author(s)

Reviewer(s)

1.0

03-Sep-2014

Sebastian
Husnik

Oliver Shikaloski, Holger Bauszus, Thomas Lemmer

1.1

05-Sep-2014

Sebastian
Husnik

Thomas Lemmer

1.2

08-Sep-2014

Sebastian
Husnik

Thomas Lemmer

1.3

17-Sep-2014

Sebastian
Husnik

Thomas Lemmer

1.4

06-Oct-2014

Sebastian
Husnik

Thomas Lemmer

1.5

08-Oct-2014

Sebastian
Husnik

Thomas Lemmer

WP Name

uniFLOW Release Station - Installation & Configuration

Knowledgebase

MOMKB-770 https://web.nt-ware.net/its/browse/MOMKB-770

File Name

uniFLOW Release Station - Installation & Configuration.pdf

Technologies
concerned

uniFLOW Release Station, uniFLOW

Short Summary

This document describes the installation and configuration of the uniFLOW Release Station.

Document
changes

Version

Topic(s)

Changes

1.1

Configuration (on page 12), Network
Configuration (on page 21), Firmware
Update (on page 23), Factory Reset (on
page 22), Job Release via uniFLOW Release
Station (on page 24)

 Added note that IPv6 is not supported
 Added note about USB drive file

system (FAT, FAT32)

 Updated cost center search

description

1.2

Card Reader (on page 18)

 Added PLUS card reader configuration

instructions

1.3

Mounting Options (on page 10)

 Corrected a link

1.4

Card Reader (on page 18)

 Added MiCard PLUS config tool

download instructions.

1.5

FCC and IC Compliance Notes (on page 4)

 Updated IC Notes

Versioning

Disclaimer

All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or
mechanical, including photocopying, recording, taping, or information storage and retrieval systems - without the
prior written permission of NT-ware Systemprogrammierung GmbH.
Company and product names mentioned herein are registered or unregistered trademarks of their respective
companies. Mention of third-party products is for information purposes only and constitutes neither an endorsement
nor a recommendation. NT-ware assumes no responsibility with regard to the performance or use of these products.
Also, NT-ware makes no claim to these trademarks. Any use of trademarks, logo, service marks, trade names, and
product names is prohibited without the written permission of the respective owners.
Adlib, Express and Express Server are either registered trademarks or trademarks of Adlib Publishing Systems Inc.;
Adobe®, Adobe® Reader, Acrobat®, Distiller®, PostScript® and products of the CREATIVE SUITE(S) are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries; Apple®, the
Apple® logo, Mac®, Mac OS®, Macintosh®, iPhone®, iPad® and AirPrint® are trademarks of Apple Inc. registered in the

U.S. and other countries; Box of Box Inc.; Blackboard Transact™ of Blackboard Inc.; CANON, imageRUNNER,

imageRUNNER ADVANCE, MEAP, CPCA, AMS, iW AMS, iW Desktop, iSend, iW SAM are trademarks or registered
trademarks of Canon Inc.; CBORD CS Gold® of the CBORD Group Inc.; Crystal Reports and other Business Objects
products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of

Business Objects Software Ltd. Business Objects is an SAP company; Dropbox of Dropbox Inc.; eCopy™, eCopy®

ShareScan®, and eCopy® ScanStation® are marks or trademarks of Nuance Communications, Inc.; Evernote® of
Evernote Corporation; FileNet® of IBM Corporation; Foxit®SDK and Foxit® Reader of Foxit Corporation; Google Docs of

Google Inc.; Google Cloud Print™ web printing service is a trademark of Google Inc.; Helix™ Production Workflow is a

trademark of NT-ware Systemprogrammierung GmbH; HP, HEWLETT-PACKARD, PCL and LASERJET are registered
trademarks that belong to Hewlett-Packard Development Company, L.P.; iOS® of Cisco Technology Inc.; iDRS™ SDK
and IRISConnect™ are unregistered trademarks of I.R.I.S. Group S.A.; JAWS pdf courier™ are trademarks of Global
Graphics SA.; Microsoft®, Windows®, Windows Vista®, Windows 7®, Internet Explorer®, Internet Information Services,
Microsoft® Word, Microsoft® Excel, OneDrive, SQL Server® are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries of Microsoft Corporation; Neevia Document

Converter Pro™ of Neevia Technology; Novell®is a registered trademark of Novell Inc. in the United States and other
countries; OpenOffice.org™ of Oracle Corporation; PAS™ NetWare Print Server is a trademark of Equitrac Corp.;

PosterJet is copyrighted and an internationally registered trademark of Eisfeld Datentechnik GmbH & Co. KG; Red

Titan EscapeE of Red Titan Limited; NETAPHOR®, SiteAudit™ are trademarks of NETAPHOR SOFTWARE Inc.;
Therefore™ of Therefore; UNIX® is a registered trademark of The Open Group; uniFLOW®, uniFLOW Serverless Secure

Printing®, Helix Production Workflow®, MIND®, microMIND®, and MiCard® are registered trademarks of NT-ware
Systemprogrammierung GmbH; pcProx®, AIR ID® are registered trademarks of RFIdeas Inc.Readers; CASI-RUSCO® is a

registered trademark of ID Card Group; Radio Key® is a registered trademark of Secura Key; GProx™ II is an

unregistered trademark of Guardall; HID® ProxHID is a registered trademark of HID Global Corporation; Indala® is a
registered trademark of Motorola; ioProx™ is an unregistered trademark of Kantech.
All other trademarks, trade names, product names, service marks are property of their respective owners and are
hereby acknowledged.
While every precaution has been taken in the preparation of this document, NT-ware assumes no responsibility for
errors or omissions, or for damages resulting from the use of information contained in this document or from the use
of programs and source code that may accompany it. NT-ware does not assume any responsibility or liability for any
malfunctions or loss of data caused by the combination of at least one NT-ware product and the used operation
system and/or third-party products. In no event shall NT-ware be liable for any loss of profit or any other commercial
damage caused or alleged to have been caused directly or indirectly by this document.
In addition, this manual provides links to the sites of affiliated or independent companies and certain other
businesses. NT-ware is not responsible for examining or evaluating, and NT-ware does not warrant the offerings of,
any of these businesses or individuals or the content of their websites. NT-ware does not assume any responsibility or
liability for the actions, product, and content of all these and any other third parties. You should carefully review their
privacy statements and other conditions of use.

PLEASE NOTE: Serious problems might occur if you modify the registry of your Windows operating system incorrectly.
These problems might require that you reinstall the operating system. We strongly recommend to always back up the
registry of your Windows operating system before applying changes to it, just in case you do something wrong.
NT-ware does not assume any responsibility or liability for any impact on the operating system after changing the
registry. You understand and accept that you use this information and modify the registry of your Windows operating
system at your own risk.
Wednesday, October 08, 2014, Bad Iburg (Germany)

Important note: Information that is crucial for the correct functioning of the uniFLOW
software.

External manual: Pointer to additional manuals for third party hardware or third party
software.

Region Specific Feature: In case some features of uniFLOW are not universally
available, this icon will indicate it.

Link to an external reference within the WWW.

Detailed explanation of configuration settings or operational procedures.

Symbols

Text Styles

Text that appears in this style is used for screen text that appears in the uniFLOW user interface and on
user interface controls.

Text that appears in this style is used for User entries on screen, text that the user actually has to type in.

Text that appears in this style is used for hyperlinks to an external web page, or internal links to other pages
of this manual.

Text that appears in this style is used for code examples: XML code, variables or
regular expressions.

Pictograms

Screenshots and diagrams

This manual contains screenshots of the software, diagrams explaining relations and pictures of products.
All visuals are up-to-date at the time of writing. However, please note, that these visuals are subject to
change.

Copyright and Contact

©1998-2014 NT-ware Systemprogrammierung GmbH.

In case of errors or improvement suggestions please contact [e-mail].

uniFLOW Release Station Contents

Contents

1 Introduction ............................................................................................... 1

2 Available Models ........................................................................................ 2

3 Scope of Supply .......................................................................................... 2

4 Technical Specifications .............................................................................. 3

5 FCC and IC Compliance Notes ..................................................................... 4

6 Ports ........................................................................................................... 6

7 Supported Card Standards .......................................................................... 7

8 LED / Beep Status ....................................................................................... 9

9 Mounting Options .................................................................................... 10

10 Copy Control Cables.................................................................................. 10

11 Installation ............................................................................................... 11

12 Configuration ........................................................................................... 12

12.1 Advanced Configuration .............................................................................................. 13

12.1.1 Specific Settings ................................................................................................................................ 15

12.2 uniFLOW Release Station Website ............................................................................... 16

12.2.1 Release Station .................................................................................................................................. 16

12.2.2 Card Reader ....................................................................................................................................... 18

12.2.3 Port Configuration ............................................................................................................................. 19

12.2.3.1 Signal Interpreter ............................................................................................................................................. 19

12.2.4 Network Configuration ..................................................................................................................... 21

12.2.5 Support .............................................................................................................................................. 22

12.2.6 Upgrade ............................................................................................................................................. 22

12.2.7 About ................................................................................................................................................. 22

12.3 MiCard Configuration .................................................................................................. 22

12.4 Factory Reset .............................................................................................................. 22

12.5 Firmware Update ........................................................................................................ 23

13 Job Release via uniFLOW Release Station ................................................. 24

14 Index ........................................................................................................ 27

I

uniFLOW Release Station

Copy accounting can only be used on devices for which a copy control cable has been
developed and produced.

For a list of available copy control cables, please refer to chapter Copy Control Cables
(on page 10).

1 Introduction

The uniFLOW Release Station is an easy to use external terminal with touch screen and
embedded card reader that can be used for releasing personal secure print jobs from
any device as well as for print & copy accounting.

Specifications

 5.7 inch capacitive multi-touch screen.
 Integrated MiCard contactless card readers or model without card reader for PIN

code or credentials authentication.

 Integrated two port network switch.

For a use in projects, the uniFLOW Release Station is furthermore equipped with:

 A USB port for connecting external MiCard card readers via USB.
 An I/O connector for controlling and monitoring copying devices via copy control

cable.

1

uniFLOW Release Station

2 Available Models

The uniFLOW Release Station is available in versions with integrated MiCard card
readers and in a version without integrated card reader.

Available Models

 uniFLOW Release Station Hitag (with MiCard Hitag reader)
 uniFLOW Release Station HID (with MiCard HID reader)
 uniFLOW Release Station Multi (with MiCard Multi reader)
 uniFLOW Release Station PLUS (with MiCard PLUS reader)
 uniFLOW Release Station Touch (PIN code or credentials only; without

integrated card reader)

3 Scope of Supply

The uniFLOW Release Station package includes:

 The uniFLOW Release Station device.
 A patch cable to connect the device to a printer.
 Power supply.
 The uniFLOW Release Station Installation Guide.

2