NTI XTENDEX USB-C5, XTENDEX USB-C5-CE Installation And User Manual
NTI
NETWORK
R
TECHNOLOGIES
INCORPORATED
1275 Danner Dr
Aurora, OH 44202
www.networktechinc.com
Tel:330-562-7070
Fax:330-562-1999
XTENDEX®Series
USB-C5
USB-C5-CE
USB EXTENDER
Installation and User Guide
Front and rear view of USB-C5-CE Devices Unit
MAN022 Rev Date 02/20/2007
TRADEMARK
XTENDEX is a registered trademark of Network Technologies Inc in the U.S. and other countries.
COPYRIGHT
© 2002-2007 Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the
prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.
CHANGES
The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the
right to make changes in the product design without reservation and without notification to its users.
Shielded CAT 5,5e, or 6 cable must be used to connect to the CAT5 ports in order to meet CE emission and immunity
requirements.
CE Statement
We, Network Technologies Inc, declare under our sole responsibility that the USB-C5-CE is in conformity with European Stand ard
EN55022.
i
MAN022 Rev Date 02/20/2007
TABLE OF CONTENTS
Introduction......................................................................................................................................................................1
Glossary.......................................................................................................................................................................1
Limitations....................................................................................................................................................................1
Materials ......................................................................................................................................................................1
Preparation for Installation ..............................................................................................................................................2
Features and Functions...................................................................................................................................................3
Installation .......................................................................................................................................................................4
The CPU Unit (Local)...................................................................................................................................................4
The Devices Unit (Remote) .........................................................................................................................................5
Plug-in and Boot Up.....................................................................................................................................................6
Technical Specifications..................................................................................................................................................7
General Specifications.................................................................................................................................................7
Power Requirements...................................................................................................................................................7
Interconnection Cable Wiring Method .........................................................................................................................8
Troubleshooting...............................................................................................................................................................8
Problem........................................................................................................................................................................8
Cause...........................................................................................................................................................................8
Solution........................................................................................................................................................................8
Warranty Information.......................................................................................................................................................9
TABLE OF FIGURES
Figure 1- Connect the CAT5 USB Extender to a CPU.......................................................................................................................4
Figure 2- Connect devices to the CAT5 USB Extender .....................................................................................................................5
Figure 3- Attach the CAT5 cable to the Devices Unit.........................................................................................................................5
Figure 4- Connect the AC adapter to the Devices Unit...................................................................................................................... 6
ii
MAN022 Rev Date 02/20/2007
NTI XTENDEX USB EXTENDER
INTRODUCTION
The NTI USB-C5 USB Extender was designed to allow the connection of up to 4 USB devices (keyboards, mice,
cameras, etc.) to a USB CPU using unshielded CAT5 cable. It acts as a remote USB HUB. The USB-C5 USB Extender is selfpowered and designed for high power devices.
It is extremely simple to install and has been thoroughly tested to insure re liable performance. Through the use of Category 5
unshielded twisted-pair cable it is possible to economically increase the range of the USB.
Available Option
• Model USB-C5-CE has been tested and certified to meet CE emission and immunity requirements.
Glossary
• bus-powered- devices powered from the USB cable- .5A (500mA) maximum
• self-powered- devices powered from a local source (such as batteries or transformer) requiring only negligible
current draw from the USB cable
Limitations
The total length of the CAT5 cable between a USB CPU and devices con nected to the USB-C5 USB Extender must not exceed
100 feet.
Note: "total length" includes the USB cable from the CPU + the CAT5 cable + cable length to any device.
(For bus powered devices only- exclude self-powered devices from calculation)
Materials
Materials Supplied with this kit:
• NTI USB-C5 (or USB-C5-CE) USB Extender Devices Unit (Local)
• NTI USB-C5 (or USB-C5-CE) USB Extender CPU Unit (Remote)
• 120VAC or 240VAC at 50 or 60Hz-9VDC/1.5A AC Adapter
• Line Cord, country specific
• USB-AB-1M Cable
• This owner's manual
Materials Not Supplied, BUT REQUIRED:
• CAT5 Cable
1
Loading...