NTI XTENDEX ST-C5VRS-600 Installation And Operation Manual

R
NETWORK TECHNOLOGIES INCORPORATED
XTENDEXTM Series
ST-C5VRS-600
VIDEO AND RS232
EXTENDER
Installation and Operation Manual
Manual 039 Rev. 3/13/03
WARRANTY INFORMATION
The warranty period on this product (parts and labor) is one (1) year from the date of purchase. Please contact Network Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at http://www.nti1.com for information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.
COPYRIGHT
Copyright © 2003 by Network Technologies Inc, all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202. For more information please contact Network Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070.
CHANGES
The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the right to make changes in the product design without reservation and without notification to its users.
Table of Contents
Introduction.............................................................................................................................................................. 1
Materials..................................................................................................................................................................1
Features and Functions...........................................................................................................................................2
Limitations ...............................................................................................................................................................3
Preparation for Installation ......................................................................................................................................3
Installation ...............................................................................................................................................................4
The Local Unit......................................................................................................................................................4
The Remote Unit..................................................................................................................................................6
Plug-in and Boot Up................................................................................................................................................7
Video Quality........................................................................................................................................................... 7
Technical Specifications..........................................................................................................................................8
Interconnection Cable Wiring Method.....................................................................................................................8
Troubleshooting....................................................................................................................................................... 9
Table of Figures
Figure 1- Connect the Local Unit to the CPU.................................................................................................................... 4
Figure 2- Connect Local User's Monitor to Local Unit...................................................................................................... 5
Figure 3- Connect the Extended Components to the Remote Unit................................................................................ 6
Figure 4- Connect the AC adapters to the Remote and Local Units.............................................................................. 7
Figure 5- View looking into RJ45 female............................................................................................................................ 8
Introduction
Introduction
The XTENDEX Series ST-C5VRS-600 Video and RS232 Extender is designed to enable one CPU to be viewed or accessed by two touchscreen monitors, one local and one remote. The remote monitor can be located as much as 600 feet away from a CPU via Category 5 unshielded twisted-pair cable. The local monitor will be located near the CPU.
The XTENDEX Series ST-C5VRS-600 Video and RS232 Extender is extremely simple to install and has been thoroughly tested to insure reliable performance. Through the use of Category 5 unshielded twisted-pair cable it is possible to economically increase the flexibility of a computer system. Here are some of the features and ways this can benefit any workplace:
Allows the placement of a touchscreen monitor in a location where only this is needed without having
the CPU there too, taking up valuable space
Allows a CPU to be accessed by both a local and remote user (up to 600 feet away)
Compatible with XGA, VGA, and SVGA systems
RS232 support enables the extension of a serial device (i.e. touch-screen monitor or mouse)
Provides crisp and clear resolution up to 1280 x 1024 @ 600 feet
Compatible with all NTI video switches and splitters, enabling the joining of products to create a
system that satisfies all networking needs
Video quality is automatic providing optimum image quality
Materials
Materials
Materials Included with this kit:
9 NTI ST-C5VRS-600 Video and RS232 Extender Local Unit 9 NTI ST-C5VRS-600 Video and RS232 Extender Remote Unit 9 2- 120VAC or 240VAC at 50 or 60Hz-5VDC/2.0A AC Adapters 9 This owner's manual
Additional materials may need to be ordered, depending upon the configuration:
¾ VEXT-xx and DINT-xx if the Local Unit will be located further than 15" from the CPU or NTI switch ¾ CAT5 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1,
etc. (see pg. 8 for proper EIA/TIA 568 B wiring method)
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US & Canada or 330-562-7070 (Worldwide) or at our website at http://www.nti1.com and we will be happy to be of assistance.
1
Loading...
+ 9 hidden pages