NTI XTENDEX ST-2FODVI-LC Installation And Operation Manual

y

®

XTENDEX

Series

ST-2FODVI-LC

DVI Extender via Fiber Optic Cable

Installation and Operation Manual

FIBER-D-LCLC-50-xxM

(Sold Separatel

)

MAN115 Rev Date 06/29/2009

TRADEMARK

XTENDEX is a registered trademark of Network Technologies Inc in the U.S. and other countries.

COPYRIGHT

Copyright © 2009 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.

CHANGES

The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the
right to make changes in the product design without reservation and without notification to its users.

TABLE OF CONTENTS

Introduction......................................................................................................................................................................1

System Requirements .................................................................................................................................................3

Installation .......................................................................................................................................................................3

Self-EDID Programming Procedure ............................................................................................................................6

Troubleshooting...............................................................................................................................................................7

Product Specifications.....................................................................................................................................................7

Warranty Information.......................................................................................................................................................8

TABLE OF FIGURES

Figure 1- Schematic connection diagram of optical DVI extension modules......................................................................................2

Figure 2- Connection of the power adapter to the transmitter............................................................................................................3

Figure 3- Connection of the power adapter to the receiver................................................................................................................4

Figure 4- Connection of optical fibers ................................................................................................................................................4

Figure 5- Connection of the transmitter to the DVI source.................................................................................................................5

Figure 6- Connection of the receiver to the display............................................................................................................................5

Figure 7- Position of EDID LED and PRGM button............................................................................................................................6

NTI XTENDEX DVI FIBER OPTIC EXTENDER

INTRODUCTION

The XTENDEX® ST-2FODVI-LC DVI Extender via Fiber Optic Cable locates a single link digital DVI display away from a
computer up to 4,920 feet (1,500 meters) using duplex singlemode fiber optic cable and 1,640 feet (500 meters) using duplex
multimode fiber optic cable with LC style connectors. Each extender consists of a transmitter that connects to a computer and a
receiver that connects to a monitor.

Features:

•

Ideal solution for digital signage applications.

• Supports computer resolutions to 1920x1200.

• Signal transmission via two strand single-mode or multimode LC fiber optic cable – no RF interference.

o Using single-mode cable, extend to 4,920 feet.
o Using multi-mode cable, extend to 1,640 feet.

• Small form factor – allowing for easy connection and placement.

• Cables can be installed in conduit prior to extender installation.

• EDID learning for the support of any DVI display device.

• Low RFI/EMI for sensitive applications.

• No software to install.

The DVI Optical Extender is the ideal solution for a wide range of applications. Examples include:

• Remote DVI display monitoring for medical, military, aerospace, industrial and traffic control applications.

• Digital Flat Panel Displays (FPD), Plasma Display Panels (PDP) and projectors in conference rooms and auditoriums.

• Kiosks with digital FPDs.

• Color LED signboards, FPDs and PDPs for information display at stadiums.

1