NTI ST-C6HD-HDBT-L8-R Operation Manual
ST-C6HD-HDBT-L8-R
8 HDMI over CAT5e/6/7
Point-to-Point Transmitter
Operation Manual
Operation Manual
safety precautiONs
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
revisiON histOry
versiON NO. Date DD/MM/yy suMMary Of chaNge
VR0 03/08/12 Preliminary Release
cONteNts
1. introduction ............................................1
2. applications ...........................................1
3. package contents ................................1
4. system requirements ............................1
5. features ..................................................2
6. Operation controls and functions .......3
6.1 Front Panel ........................................3
6.2 Rear Panel .........................................4
7. connection Diagram ............................5
8. Specications ........................................7
9. acronyms ...............................................8
1
1. iNtrODuctiON
The 8 HDMI over CAT5e/6/7 Point-to-Point Transmitter supports the
transmission of uncompressed video (up to 1080p@60 Hz/36-bit) with
multichannel digital audio from up to eight high denition sources to
up to eight CAT6 outputs. Also, the unit can be used in conjunction
with the 8×8 HDMI matrix (optional) to provide switching control,
allowing the display of any source device on any output display.
2. applicatiONs
• Commercial advertising and display
• Lecture room display
• Hyper market demonstration
3. package cONteNts
• HDMI over CAT6 Transmitter
• 1×24 V/6.25 A DC Adaptor
• Operation Manual
4. systeM requireMeNts
• HDMI equipped input source devices
• Industry standard CAT5e/6/7 cables
Loading...