NTI ENVIROMUX, ENVIROMUX E-5D, ENVIROMUX E-16D, ENVIROMUX E-2D Series Manual

ENVIROMUX

®

Series

Serial Control Manual

E-16D/-5D/-2D

Enterprise Environment Monitoring System

Front and Rear View of E-16D

Front View of E-5D

Front View of E-2D

MAN154-SCM Rev Date 5/8/19

TRADEMARK

ENVIROMUX is a registered trademark of Network Technologies Inc in the U.S. and other countries.

COPYRIGHT

Copyright © 2005, 2019 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored
in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.

CHANGES

The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the
right to make changes in the product design without reservation and without notification to its users.

Firmware Version

Current Firmware version 2.57

Electrical

E-16D: 100-240VAC, 50-60Hz, 1.5A@110VAC/0.75A@230VAC
E-5D: 100 to 240 VAC at 50 or 60 Hz via AC adapter; 1.7A@9VDC (9VDC 3A power supply included)
E-2D: 100 to 240 VAC at 50 or 60 Hz via AC adapter; 1.1A@9VDC (9VDC 3A power supply included)

RISK OF ELECTRIC SHOCK

maintenance must be performed by authorized service personnel only.

CAUTION

. Do not remove cover. No user serviceable components inside. All repairs and

CAUTION

Turn OFF power to the ENVIROMUX and discharge your body’s static electric charge by touching a grounded surface or
use a grounding wrist strap before performing any connections to the unit.

CAUTION

For continued protection against fire and electric shock this device should only be connected to an AC mains outlet
equipped with a proper ground terminal.

i