NTI DL1 Specifications

Digilyzer DL1

Technical Specification

dated Oct 2003
Frame Consumer / Professional, up to 24 bit,

Sampling Frequency fs = 32 – 96 kHz,
Also supports: Interleaved 96 kHz mode on

all inputs (single channel double sampling
frequency mode)

Measurements

Signal Level-FS, Level-RMS, Signal Frequency,

THD+N (down to -100dB or 0.001%), Scope,
Frequency Sweep, VU+PPM,
Event Logger, Overload Detection

Carrier Sampling Frequency ( accuracy ±2.5 ppm),

Carrier Level, Error Indicator Box

Frame Channel Status according to AES 3

(edition 1999) and IEC 60958-3,
Bit Statistics, Consistency Check

Event Logger

Recording Resolution selectable 1”, 10”, 1’, 10’, 1h
Recording Duration 8’, 83’, 8h, 83h, 20days
Display ?t 1”, 10”, 1’, 10’, 1h, 10h, 24h, all
Recording Intervals max. 500

Single Errors in one
recording interval 10 - 36 000

Input Connectors

AES3 (110 Ohm) XLR, S/PDIF (RCA),
TOS-Link, ADAT,
AES3id (75 Ohm) using optional adapter,
phantom power resistant

Monitor Built-in speaker, headphone connector
Display Backlit graphic LCD
Power Supply - 3x AA size dry batteries (alkaline),

typical lifetime 8 hours

- External DC power, 7.5 VDC, 500 mA,
stabilized, use NTI recommended parts only

Dimensions (L x W x H)

163 x 86 x 42 mm (6.4“ x 3.38“ x 1.63“)

Weight 300 g (10.5 oz) incl. batteries
Temperature 0° to +45° C (32° to 113° F)

Contact details:

NTI AG
Im alten Riet 102
9494 Schaan
Liechtenstein
Tel. +423 / 239 60 60
Fax. +423 / 239 60 89
[e-mail],
www.minstruments.com

Humidity < 90 % R.H., non condensing

Page 1 of 1