NTE Electronics VHT SERIES Catalog Page
105°C ALUMINUM ELECTROLYTIC
VHT SERIES
SUBMINIATURE
(Radial Lead, 105°C Max)
The NTE VHT series of aluminum electrolytic capacitors
are designed for use in automotive, commercial, and industrial applications. These high temperature, radial lead
capacitors are especially suitable for applications that require extended life and higher temperature operation.
RATINGS
Capacitance Range: 0.1µf to 4700µf
Tolerance: ±20%
Voltage Range: 16 to 250 Volts
PERFORMANCE SPECIFICATIONS
Operating Temperature Range:
–40°C to +105°C (–40°F to +220.9°F)
Leakage Current:
6.3V to 100V: ≤ 0.01CV (+3µA)
160V to 250V: ≤ 0.03CV (+15µA)
Capacitance Tolerance: ±20% (M)
measured at +20°C (+68°F), 120H
High Temperature Load Test:
1000 Hrs @ +105°C (+220.9°F) and rated voltage
Ripple Current:
The ripple current multipliers (See Table) adjust
the current to make the capacitors operating temperature the same for different ambient temperatures and ripple frequencies.
Temperature 45°C 55°C 65°C 75°C 85°C 95°C 105°C
Multiplier 1.5 1.46 1.32 1.17 1.0 0.79 0.5
Load Life: 1000 Hrs @ +105°C (+220.9°F),
no voltage applied
Shelf Life: 1000 Hrs @ +105°C (+220.9°F),
no voltage applied
Z
MECHANICAL SPECIFICATIONS
Lead Solderability:
Meets the requirements of MIL–STD 202,
Method 208
Marking:
Consists of series type, nominal capacitance,
rated voltage, temperature range, anode and/or
cathode identification, vendor identification.
Recommended Cleaning Solvents:
Methanol, isopropanol ethanol, isobutanol, petroleum ether, propanol and/or commercial detergents. Halogenated hydrocarbon cleaning
agents such as Freon (MF, TF, or TC), trichloroethylene, trichloroethane, or methylchloride are
not recommended as they may damage the capacitor.
CASE SIZE AND DIMENSIONS:
Insulating
Sleeve
L
L’ 5.0 Min
D’ Ø = D Ø + 0.5 Max L’ = L + 1.0 Max at D Ø ≤ 8.0 L’ = L + 2.0 Max at D Ø ≥ 10.0
18.0 Min
d Ø
A ±0.5
ORDERING INFORMATION
VHT 10 M 25
Series
Capacitance
Tolerance
Voltage
D Ø
D’ Ø
10
NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com
105°C ALUMINUM ELECTROLYTIC
VHT SERIES
VHT Series Dimensions: Diameter (D Ø) x Length (L): mm
WV
Cap (µf)
0.1 5 x 11
0.22 5 x 11
0.33 5 x 11
0.47 5 x 11 5 x 11
1.0 5 x 11 5 x 11 6 x 11 6 x 11
2.2 5 x 11 5 x 11 6 x 11 8 x 11.5
3.3 5 x 11 5 x 11 8 x 11.5 10 x 12.5
4.7 5 x 11 5 x 11 5 x 11 5 x 11 8 x 11.5 10 x 12.5
10 5 x 11 5 x 11 5 x 11 5 x 11 6 x 11 10 x 12.5 10 x 20
22 5 x 11 5 x 11 6 x 11 6 x 11 8 x 11.5 10 x 20 13 x 25
33 5 x 11 6 x 11 6 x 11 8 x 11.5 8 x 11.5 13 x 21 13 x 25
47 6 x 11 6 x 11 8 x 11.5 8 x 11.5 10 x 12.5 13 x 25 16 x 25
100 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 10 x 20 16 x 25 18 x 36
220 10 x 12.5 10 x 16 10 x 20 13 x 20 13 x 20
330 10 x 16 10 x 20 13 x 20 13 x 20 13 x 25
470 10 x 20 13 x 20 13 x 25 16 x 25 16 x 25
1000 13 x 25 16 x 25 16 x 25 16 x 25 18 x 31.5
2200 16 x 25 16 x 31.5 18 x 31.5
3300 16 x 31.5 18 x 31.5
4700 18 x 31.5
* These dimensions are for reference only, please consult the factory for actual size.
16 25 35 50 63 160 250
VHT Mechanical Specs: Dimensions (mm)
Outside Diameter D Ø 5.0 6.0 8.0 10.0 13.0 16.0 18.0
Lead Spacing A 2.0 2.5 3.5 5.0 7.5
Lead Wire d Ø 0.5 0.6 0.65 0.8
* These dimensions are for reference only, please consult the factory for actual size.
11NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com
Loading...