NTE Electronics R02 Series Data Sheet
Features
• Hermetically Sealed, Metal Enclosure Types (H−suffix)
• U/L Approved for Class 1, Div 2 Hazardous Locations (H−suffix)
• Push−to−Test Button Types (B−suffix)
• Indicator Lamp Types (N−suffix)
• Mechanical Indicator Types (M−suffix)
• 8−Pin and 11 −Pin Octal Plug−In Types
• SPDT, DPDT and 3PDT Types
• Clear Plastic Dust Cover
AC OPERATED
Coil
Nom.
NTE TYPE No.
R02−5A10−12 12VAC SPDT − 3.9VA 10A D1C
R02−5A10−24 24VAC SPDT − 3.9VA 10A D1C
R02−5A10−120 120VAC SPDT − 3.9VA 10A D1C
R02−5A10−240 240VAC SPDT − 3.9VA 10A D1C
R02−11A10−6 6VAC DPDT − 2.0VA 10A D1A
R02−11A10−12 12VAC DPDT − 2.0VA 10A D1A
R02−11A10−24 24VAC DPDT − 2.0VA 10A D1A
R02−11A10−24B 24VAC DPDT − 2.0VA 10A D1A
R02−11A10−24H 24VAC DPDT − 3.0VA 10A D2A
R02−11A10−24N 24VAC DPDT − 2.0VA 10A D1A
R02−11A10−120 120VAC DPDT − 2.0VA 10A D1A
R02−11A10−120B 120VAC DPDT − 2.0VA 10A D1A
R02−11A10−120H 120VAC DPDT − 3.0VA 10A D2A
R02−11A10−120N 120VAC DPDT − 2.0VA 10A D1A
R02−11A10−240 240VAC DPDT − 2.0VA 10A D1A
R02−14A10−6 6VAC 3PDT − 3.9VA 10A D1B
R02−14A10−6M 6VAC 3PDT − 3.9VA 10A D1B
R02−14A10−12 12VAC 3PDT − 2.75VA 10A D1B
R02−14A10−24 24VAC 3PDT − 2.75VA 10A D1B
R02−14A10−24B 24VAC 3PDT − 2.75VA 10A D1B
R02−14A10−120 120VAC 3PDT − 2.75VA 10A D1B
R02−14A10−120B 120VAC 3PDT − 2.75VA 10A D1B
R02−14A10−120H 120VAC 3PDT − 3.0VA 10A D2B
R02−14A10−120N 120VAC 3PDT − 2.75VA 10A D1B
R02−14A10−240 240VAC 3PDT − 2.75VA 10A D1B
Voltage
Contact
Arr.
Res.
Ohms
(Typ)
Nom.
Power
DC OPERATED
R02−5D10−6 6VDC SPDT 30 1.2W 10A D1C
R02−5D10−12 12VDC SPDT 120 1.2W 10A D1C
R02−5D10−24 24VDC SPDT 480 1.2W 10A D1C
R02−5D10−11 0 110VDC SPDT 10K 1.2W 10A D1C
R02−11D10−6 6VDC DPDT 30 1.2W 10A D1A
R02−11D10−12 12VDC DPDT 120 1.0W 10A D1A
R02−11D10−12B 12VDC DPDT 120 1.0W 10A D1A
R02−11D10−12H 12VDC DPDT 100 1.5W 10A D2A
R02−11D10−12N 12VDC DPDT 120 1.0W 10A D1A
R02−11D10−24 24VDC DPDT 470 1.0W 10A D1A
R02−11D10−24B 24VDC DPDT 470 1.0W 10A D1A
R02−11D10−24N 24VDC DPDT 470 1.0W 10A D1A
R02−11D10−48 48VDC DPDT 1630 1.5W 10A D1A
R02−11D10−110 110VDC DPDT 10K 1.2W 10A D1A
R02−11D10−110H 110VDC DPDT 8K 1.5W 10A D2A
R02−14D10−6 6VDC 3PDT 30 1.2W 10A D1B
R02−14D10−12 12VDC 3PDT 120 1.0W 10A D1B
R02−14D10−12B 12VDC 3PDT 120 1.0W 10A D1B
R02−14D10−24 24VDC 3PDT 470 1.0W 10A D1B
R02−14D10−24B 24VDC 3PDT 470 1.0W 10A D1B
R02−14D10−48 48VDC 3PDT 1630 1.5W 10A D1B
R02−14D10−110 110VDC 3PDT 10K 1.2W 10A D1B
ACCESSORIES
MOUNTING
STYLES DESCRIPTION
SURFACE MOUNT 8−PIN OCTAL
DIN RAIL MOUNT 8−PIN OCTAL
PANEL MOUNT 8−PIN OCTAL
11−PIN OCTAL
11−PIN OCTAL
11−PIN OCTAL
Max.
Contact
Cur. @
28VDC
or 120VAC
NTE
TYPE NO.
R95−101
R95−104
R95−113
R95−181
R95−114
R95−182
R95−118
R95−119
Diag
No.
R02 Series
General Purpose, 10 Amp
Multicontact AC and DC Relays.
Electrical Specifications
Contact
Poles 120VAC 240VAC 28VDC
SPDT 10A (1/10 HP) 10A (1/6 HP) 10A
DPDT 10A (1/3 HP) 8A (1/2 HP) 10A
3PDT 10A (1/3 HP) 6A (1/2 HP) 10A
Contact Material: 3/16” Silver cadmium oxide
Contact Resistance: 0.050 ohms max initial
Coil
Coil Voltages: See Chart
Pick−up Voltage: 80% of nominal or less, DC
Resistance: See chart
Min Sensitivity: (125mW per pole)
Duty Cycle: Continuous
Operational Characteristics
Timing Values Operate Time: 25 mS or less. . . . .
Insulation Characteristics
Dielectric Strength
Insulation Material: Molded polyester
Insulation Resistance: 1 x 103 megohms min
Environmental Characteristics
Operating: −10°C to +50°C (AC), −10°C to +60°C (DC)
Non−operating (storage): −30°C to +105°C
Weight
Std: 31/2 ozs (99.2 grams)—typical
Hermetic sealed: 5 ozs (141.7 grams)—typical
Contact Rating
80% of nominal or less, AC
at nominal
Release Time: 20 mS or less
coil voltage
Contact To Coil: 1500 VRMS
Across Open Contacts: 1000 VRMS
Pole to Pole: 1500 VRMS
Contacts To Frame: 1500 VRMS
NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 D http://www.nteinc.com
15
D1 D2
1.53 (38.89)
1.30 (33.02)
2.23
(56.64)
1.40
(35.56)
2.03
(51.59)
2.80
(71.12)
1.69
(42.86)
Note: Models with “N” suffix will have indicator lamp connected across coil.
A (DPDT), 2 Form “C” B (3PDT), 3 Form “C” C (SPDT), 1 Form “C”
5
4
3
2
1
6
7
8
Viewed from Pin end of Plug Viewed from Pin end of Plug Viewed from Pin end of Plug
Note: R02−14A10−120H has Pin5 and Pin6
Reversed.
6
5
4
3
2
7
8
9
10
11
1
3
3
3
2
2
2
5
5
5
4
4
4
6
6
6
7
7
7
1
1
1
8
8
8
16
NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 D http://www.nteinc.com
Loading...