NTE Electronics NTE6249, NTE6250 Data Sheet

NTE6249 & NTE6250

Silicon Rectifier, Ultrafast

10 Amp, TO−220 Full Pack

Features:

D Glass Passivated Die Construction
D Ultrafast 50nS and 100nS Recovery Time
D Low Forward Voltage Drop
D Low Reverse Leakage Current
D High Surge Current Capability
D Ideally Suited for Use in High Frequency SMPS, Inverters, and As Free Wheeling Diodes
D Epoxy Meets UL 94V−0 Classification

Absolute Maximum Ratings:

(TA = +25C unless otherwise specified. Single Phase, Half Wave,
60Hz, Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%)
Peak Repetitive Reverse Voltage, V

RRM

NTE6249 200V...................................................................

NTE6250 800V...................................................................

Working Peak Reverse Voltage, V

RWM

NTE6249 200V...................................................................

NTE6250 800V...................................................................

DC Blocking Voltage, V

R

NTE6249 200V...................................................................

NTE6250 800V...................................................................

RMS Reverse Voltage V

R(RMS)

NTE6249 140V...................................................................

NTE6250 560V...................................................................

Average Rectified Output Current (T
Non−Repetitive Peak Forward Surge Current, I

= +100C), I

C

O

FSM

(8.3ms Single Half Sine−Wave Superimposed on Rated Load) 150A....................

RMS Isolation Voltage (t = 1 min), V
Operating Junction Temperature Range, T
Storage Temperature Range, T
Thermal Resistance, Junction−to−Ambient, R
Thermal Resistance, Junction−to−Case, R

ISO

J

stg

thJA

thJC

10A....................................

1500V..............................................

−55 to +150C..................................

−55 to +150C..........................................

75C/W...................................

5C/W.......................................

Rev. 6−17

Electrical Characteristics: (TA = +25C unless otherwise specified. Single Phase, Half Wave,
60Hz, Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%)

Parameter Symbol Test Conditions Min Typ Max Unit

Forward Voltage

NTE6249

NTE6250 − 1.7 − V

V

FM

IF = 10A − 1.0 − V

Peak Reverse Current
At Rated DC Blocking Voltage

Reverse Recovery Time

NTE6249

NTE6250 − 100 − nS

Typical Junction Capacitance

NTE6249

NTE6250 − 50 − pF

I

RM

t

C

T

= +25C

A

T

= +125C

A

rr

IF = 0.5A, IR = 1A, IRR = 0.25A,
Note 1

Note 1 − 80 − pF

J

− 10 − A

− 500 − A

− 50 − nS

Note 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0V D.C.

All Dimensions Maximum Value

.138 (3.50) Dia Max .189 (4.80)

.406

(10.30)

.271 (6.90)

.130 (3.30).112 (2.85)

.606

(15.40)

PIN1 3

.164

.114 (2.90)

(4.16)

.543

(13.80)

.035 (0.90)

.210 (5.33) .032 (0.80)

PIN1

PIN3