NTE Electronics NTE3132 Data Sheet
NTE3132
Light Emitting Diode
Water Clear, High Efficiency Super Yellow−Green
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation, P
Forward Current, I
D
F
Continuous 25mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Peak (0.1 ms pulse width, 1/10 duty cycle) 50mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reverse Voltage, V
LED Junction Temperature, T
Operating Temperature Range, T
Storage Temperature Range, T
Lead Temperature (During Soldering, 3sec max, 2mm below package base), T
R
J
opr
stg
−30° to +85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
−40° to +100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L
Electrical Characteristics: (TA = +25°C unless otherwise specified)
Parameter Symbol Test Conditions Min Typ Max Unit
View Angle of Half Power 2θ1/2 IF = 20mA − 24 − degree
Forward Voltage V
Reverse Current I
Luminous Intensity I
Peak Emission Wavelength λp IF = 20mA, Note 2 − 570 − nm
Dominate Wave Length λ
Spectrum Width of Half Valve ∆λ IF = 20mA − 30 − nm
R
V
d(HUE)IF
IF = 20mA − 2.15 2.80 V
F
VR= 5V − − 10 µA
IF = 20mA, Note 1 200 500 − mcd
= 20mA − 567 − nm
84mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+240°C. . . . . . . . .
5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note 1. Tolerance: 30%, measured using Exeltron 2001.
Note 2. The dominate wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the
color of the device.
.088 (2.25)
.016 (0.4)
.070 (1.8) Dia
.240 (6.1)
.181 (4.6)
.119 (3.04)
.088 (2.25)
Cathode Stripe
.108 (2.75)
.043 (1.1)
Loading...