NTE Electronics NTE30124 Data Sheet

NTE30124

Super Bright LED Indicator

Super Purple, 10mm

Features:

D Low Power Consumption
D High Efficiency
D Versatile Mounting on P.C. Board or Panel

Applications:

D TV Sets
D Monitor
D Telephone

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation, P

D

Peak Forward Current (1/10th Duty Cycle, 0.1ms Pulse Width), I
Continuous Forward Current, I
Reverse Voltage, V

R

Operating Temperature Range, T
Storage Temperature Range, T

F

opr

stg

Lead Temperature (During Soldering, 3mm from Body, 5sec Max), T

D Low Current Requirement
D Reliable and Robust

D Computer
D Circuit Board

FM

L

80mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

100mA. . . . . . . . . . . . . . . . . . . .

30mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

-25° to +85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

-25° to +100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

+260°C. . . . . . . . . . . . . . . . . .

Electrical Optical Characteristics: (TA = +25°C unless otherwise specified)

Parameter Symbol Test Conditions Min Typ Max Unit

Luminous Intensity I

View Angle of Half Power 2 q

Peak Emission Wavelength λ

Dominant Emission Wavelength λ

Full Width at Half Max Δλ IF = 20mA - 12.3 - nm

Forward Voltage V

Reverse Current I

IF = 20mA 150 180 - mcd

V

1/2IF

P

d

F

R

= 20mA - 20 - deg

IF = 20mA - 400 - nm

IF = 20mA - - - nm

IF = 20mA - 3.3 4.0 V

VR = 5V - - 10 μA

Note 1. Luminous intensity is measured with a light sensor and filter combination that approximates

the CIE eye-response curve.

Note 2. q

is the off-axis angle at which the luminous intensity is half the axial luminous intensity.

1/2

Note 3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents

the single wavelenght, which defines the color of the device.

.425

(10.8)

Dia

.394 (10.0) Dia

.537

(13.65)

.078
(2.0)

Cathode

.019 (0.5)

.100 (2.54)

1.063
(27.0)

.078 (2.0) Min