NTE Electronics NTE30106 Data Sheet

NTE30106
p
()
LED Dual Color
5mm Super Fresh Red/Super Yellow Green
Features:
D RoHS Compliant D Water Clear
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Power Dissipation, P Continuous Forward Current, I Peak Forward Current (1/10 Duty Ratio, 0.1ms Pulse Width), I
d
F
FM
Super Fresh Red 50mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Super Yellow Green 80mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reverse Voltage, VR 5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED Junction Temperature, T Operating Temperature Range, T Storage Temperature Range, T DIP Soldering Temperature (During Soldering, 3mm from body, 5sec max), T
j
opr
stg
L
25°C to +85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40°C to +100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+260°C. . . . . . . . . .
ElectroOptical Characteristics: (TA = +25°C unless otherwise specified)
Parameter Symbol Test Conditions Min Typ Max Unit
View Angle of Half Power 2Q 1/2 IF = 20mA 20 deg Forward Voltage
Super Fresh Red VF IF = 20mA 2.00 2.50 V
Super Yellow−Green 2.20 2.50 V
Reverse Current IR VR = 5V 10 μA Luminous Intensity (Note 1)
Super Fresh Red IV IF = 20mA 700 1500 mcd
Super Yellow−Green 400 800 mcd
Peak Emission Wavelength
Super Fresh Red λp IF = 20mA 635 nm
Super Yellow−Green
Dominate Wave Length (Note 2)
Super Fresh Red λd(HUE) IF = 20mA 626 nm
Super Yellow−Green
575 nm
572 nm
Note 1. Luminous intensity is measured with an Exeltron 2001, Tolerance = 30%. Note 2. The dominate wavelength, λd, is derived from the CIE Chromaticity Diagram and represents
the color of the device.
0.22
(5.75)
0.41
(10.5)
0.02 (0.7) Max
0.01 (0.5)
0.03 (1.0) MIn
0.34
(8.7)
0.94
(24.0)
Min
0.07 (2.0) MIn
1. Red +
2. Common Lead
3. Green +
0.10
(2.54)
Loading...