NTE Electronics NTE30104 Data Sheet

NTE30104

p

()

LED − Dual Color

5mm High Efficiency Red/Yellow Green

Features:

D RoHS Compliant
D White Diffused

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation, P

High−Efficiency Red 90mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Yellow Green 84mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous Forward Current, I

High−Efficiency Red 30mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Yellow Green 25mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Peak Forward Current (1/10 Duty Ratio, 0.1ms Pulse Width), I

Reverse Voltage, VR 5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

LED Junction Temperature, T
Operating Temperature Range, T
Storage Temperature Range, T
DIP Soldering Temperature (During Soldering, 3mm from body, 5sec max), T

d

F

FM

j

opr

stg

L

−25°C to +80°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

−40°C to +100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

50mA. . . . . . . . . . . . . . . . . . . . . . .

+100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

+260°C. . . . . . . . . .

Electro−Optical Characteristics: (TA = +25°C unless otherwise specified)

View Angle of Half Power 2Q 1/2 IF = 20mA − 40 − deg
Forward Voltage

Luminous Intensity (Note 1) IV IF = 20mA 35 60 − mcd
Peak Emission Wavelength

Dominate Wave Length (Note 2)

Note 1. Luminous intensity is measured with an Exeltron 2001, Tolerance = 30%.
Note 2. The dominate wavelength, λd, is derived from the CIE Chromaticity Diagram and represents

Parameter Symbol Test Conditions Min Typ Max Unit

High Efficiency Red VF IF = 20mA − 2.05 2.80 V

Yellow−Green − 2.15 2.80 V

High Efficiency Red λp IF = 20mA − 625 − nm

Yellow−Green

High Efficiency Red λd(HUE) IF = 20mA − 618 − nm

Yellow−Green

− 570 − nm

− 567 − nm

the color of the device.

0.22

(5.75)

0.41

(10.5)

0.02 (0.7) Max

0.01 (0.5)

0.03 (1.0) MIn

0.34

(8.7)

0.94

(24.0)

Min

0.07 (2.0) MIn

1. Red +

2. Common Lead −

3. Green +

0.10

(2.54)