Page 1
NTE30102
p
()
LED − Dual Color
3mm Super Fresh Red/Super Yellow Green
Features:
D RoHS Compliant
D Water Clear
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation, P
Continuous Forward Current, I
Peak Forward Current (1/10 Duty Ratio, 0.1ms Pulse Width), I
d
F
FM
Super Fresh Red 50mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Super Yellow Green 80mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reverse Voltage, VR 5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED Junction Temperature, T
Operating Temperature Range, T
Storage Temperature Range, T
DIP Soldering Temperature (During Soldering, 3mm from body, 5sec max), T
j
opr
stg
L
−25°C to +85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
−40°C to +100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+260°C. . . . . . . . . .
Electro−Optical Characteristics: (TA = +25°C unless otherwise specified)
Parameter Symbol Test Conditions Min Typ Max Unit
View Angle of Half Power 2Q 1/2 IF = 20mA − 20 − deg
Forward Voltage
Super Fresh Red VF IF = 20mA − 2.00 2.50 V
Super Yellow−Green − 2.20 2.50 V
Reverse Current IR VR = 5V − − 10 μA
Luminous Intensity (Note 1)
Super Fresh Red IV IF = 20mA 400 1000 − mcd
Super Yellow−Green 250 600 − mcd
Peak Emission Wavelength
Super Fresh Red λp IF = 20mA − 635 − nm
Super Yellow−Green
Dominate Wave Length (Note 2)
Super Fresh Red λd(HUE) IF = 20mA − 626 − nm
Super Yellow−Green
− 575 − nm
− 572 − nm
Note 1. Luminous intensity is measured with an Exeltron 2001, Tolerance = 30%.
Note 2. The dominate wavelength, λd, is derived from the CIE Chromaticity Diagram and represents
the color of the device.
Page 2
0.15
(3.85)
0.25
(6.6)
0.02 (0.7) Max
0.11 (3.0)
0.20
(5.3)
1. Red (Yellow) +
2. Common Lead −
3. Green +
0.03
(1.0)
Min
0.01 (0.5)
0.94
(24.0)
Min
123
0.10
(2.54)
Loading...