NTE Electronics NTE3002 Catalog Page

Page 1
NTE3002
Light Emitting Diode
Water Clear, Yellow
Description:
The NTE3002 is a yellow source color device made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode in a two lead epoxy package with a clear lens. The NTE3002 is intended for high volume indicator light applications. Major usage is in applications such as diag­nostic lights on printed circuit boards and panel lights. It can also be used to displace subminiature lamps as small as T3/4 size.
D Subminiature Package D Wide Viewing Angle D Long Life Solid State Reliability D Low package Profile
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation 105mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Forward Current
Continuous 30mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Peak (0.1 ms pulse width, 1/10 duty cycle) 140mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reverse Voltage 5.0V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Temperature Range -40 ° to +85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage Temperature Range -40 ° to +85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead Temperature (During Soldering, 5sec max, 2mm below package base) +260°C. . . . . . . . . . . .
Electro-Optical Characteristics: (TA = +25°C unless otherwise specified)
Parameter Test Conditions Min Typ Max Unit
Luminous Intensity IF = 20mA 10 30 - mcd Peak Emission Wavelength IF = 20mA - 590 - nm
Dominate W avelength
Spectral Line Halfwidth IF = 20mA - 35 - nm Forward Voltage IF = 20mA - 2.1 2.5 V Capacitance V = 0, f = 1MHz - 20 - pF Reverse Current VR = 5.0V - - 10 µA View Angle (2θ1/2) Note 1 - 20 - degrees
IF = 20mA
- 588 - nm
Note 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical
centerline value.
Page 2
.016 (0.4)
.098 (2.5)
.043 (1.1)
.075 (1.9) Dia
.020 (0.5)
Cathode
.276 (7.0) Min
.055 (1.4)
.315 (8.0) Min
Polarity Mark
.110
(2.8)
.079 (2.0)
Loading...