Page 1
Nylon Mounting Pads
Features
• Patented Stay-n-Place Tab keeps Cable Tie Head from Sliding
Down behind Bundle during Vertical Applications and maintains
Placement during Horizontal Applications
MP-01
Length
• Patented Lead-n-Feature Funnels Cable Tie into Position and
Countersunk Screw Hole allows Cable Tie to easily Pass Over
Screw Head
Width
• 4-Sided Entry and Center Screw Hole Saves Positioning Time
Slot Width
Height
Slot Height
Color Code Chart
0 Black 9 Natural
Rubber Adhesive Mounting Pads
NTE Type No. Square (in. / mm) Height (in. / mm) Slot Height (in. / mm) Slot Width (in. / mm) Screw Size Qty. per Bag Diag No.
04-MP750x .740 / 18.79 .190 / 4.82 .050 / 1.27 .200 / 5.08 #4 100 MP-01
04-MP1000x .990 / 25.14 .200 / 5.08 .060 / 1.52 .200 / 5.08 #6 100 MP-01
Acrylic Adhesive Mounting Pads
NTE Type No. Square (in. / mm) Height (in. / mm) Slot Height (in. / mm) Slot Width (in. / mm) Screw Size Qty. per Bag Diag No.
04-MPA750x .740 / 18.79 .190 / 4.82 .050 / 1.27 .200 / 5.08 #4 100 MP-01
04-MPA1000x .990 / 25.14 .200 / 5.08 .060 / 1.52 .200 / 5.08 #6 100 MP-01
Non-Taped Mounting Pads
NTE Type No. Square (in. / mm) Height (in. / mm) Slot Height (in. / mm) Slot Width (in. / mm) Screw Size Qty. per Bag Diag No.
04-MP750NTx .740 / 18.79 .190 / 4.82 .050 / 1.27 .200 / 5.08 #4 100 MP-01
04-MP1000NTx .990 / 25.14 .200 / 5.08 .060 / 1.52 .200 / 5.08 #6 100 MP-01
Note 1. Replace “x” in device number with corresponding color code from the “Color Code Chart”.
Natural Nylon Identification Plates
Features
• Allows Larger Print when Information and Visibility is Critical
• Increased Surface Area provides Twice the Area as Conventional
Identification Cable Ties
• Orientation Variety Apply to Bundle Vertically or Horizontally
Identification Plates
NTE Type No. Length (in. / mm) Height (in. / mm)
04-IDP19 1.570 / 40.0 .787 / 20.0 .039 / 1.0 .080 / 2.03 .180 / 4.57 100 MP-01a
04-IDP29 2.360 / 60.0 .984 / 25.0 .039 / 1.0 .080 / 2.03 .180 / 4.57 100 MP-01b
Thickness (in. / mm)
IP-01
Length
a.
Width
Length
b.
Width
Slot Height (in. / mm) Slot Width (in. / mm) Qty. per Bag Diag No.
NTE Electronics, Inc. D Voice (973) 748-5089 D FAX (973) 748-6224 D http://www.nteinc.com
7
Page 2
Standard Nylon Screw Mounts
Features
• Deep Cradle Design Provides Maximum Support for Larger
Bundles and Tubing
• Deep Recessed Screw Hole Allows Easy Insertion of Cable Ties
to Pass Over Screw Head
SM-01
Length
Width
Height
Color Code Chart
0 Black 9 Natural
Standard Nylon Screw Mounts
NTE Type No. Length Height Width Slot Height Slot Width Screw Size Qty. per Bag Diag No.
04-SM1x .590 / 14.98 .270 / 6.85 .370 / 9.39 .062 / 1.587 .190 / 4.82 #6 100 SM-01
04-SM2x .870 / 22.09 .380 / 9.65 .640 / 16.25 .125 / 3.175 .300 / 7.62 1/4” 100 SM-01
Note 1. Replace “x” in device number with corresponding color code from the “Color Code Chart”.
Note 2. Dimensions are listed as “inch / millimeter”.
Low Profile Nylon Natural Screw Mounts
Features
• Reduces Snags Allowing Bundles Closer Proximity to Mounting
Material
• Confined Spaces and Control panels or Other Areas where
Space is Limited
• Achieve Extreme Low Height when Combined with Cobra Low
Profile Cable Tie
Low Profile Nylon Screw Mounts
NTE Type No. Length Height Width Slot Height Slot Width Screw Size Qty. per Bag Diag No.
04-LPM19 .750 / 19.05 .120 / 3.04 .500 / 12.70 .062 / 1.587 .180 / 4.57 #8 100 SM-02
Note 2. Dimensions are listed as “inch / millimeter”.
SM-02
Length
Width
Thickness
8
NTE Electronics, Inc. D Voice (973) 748-5089 D FAX (973) 748-6224 D http://www.nteinc.com
Page 3
Natural Nylon Wing Push Mounts
Features
• One Piece Design Allows for Quicker Mounting with no
Mechanical Fastener Reducing Time and Cost
• Quickly Secures and Positions Wire Bundles, Cables, Hoses,
etc. to Panels
• Easy Insertion of Cable Ties through Wide Entry Slot
SM-03
Head
Depth Slot
Width
• Extra Stability is Created from the Push Mount Tensioning
Wings
Height
Width
Wing Width
Nylon Wing Push Mounts
NTE Type No. Height Depth Wing Width Head Width Slot Width Mount Width Qty. per Bag Diag No.
04-PMW9 .732 / 18.6 .374 / 9.5 .790 / 20.1 .422 / 10.72 .310 / 8.1 .244 / 6.2 100 SM-03
Note 2. Dimensions are listed as “inch / millimeter”.
Black Nylon Button Push Mounts
Features
• One Piece Design Allows for Quicker Mounting with no
Mechanical Fastener Reducing Time and Cost
• Quickly Secures and Positions Wire Bundles, Cables, Hoses,
etc. to Panels
• Easy Insertion of Cable Ties through Wide Entry Slot
• The Button Mount's Stay-n-Place Tab Keeps Cable Ties from
Sliding during Application
Nylon Button Push Mounts
NTE Type No. Height Exposed Shaft Length Button Diameter Slot Width Shaft Diameter Qty. per Bag Diag No.
04-BM0 .535 / 13.6 .248 / 6.3 .287 / 7.3 .634 / 16.12 .196 / 5.0 .299 / 7.6 100 SM-04
SM-04
Slot
Shaft
Height
Button Diameter
Note 2. Dimensions are listed as “inch / millimeter”.
NTE Electronics, Inc. D Voice (973) 748-5089 D FAX (973) 748-6224 D http://www.nteinc.com
9
Page 4
04-TG1
Tie Gun
Description:
Hand held tie gun rapidly tensions and cuts off excess cable
tie without leaving behind any sharp edges that would cause
cuts, snags, and abrasions. Manually cuts off excess with a
squeeze of its cut-off handle. For use with 120 and 175 lb.
cable ties.
Material:
Metal
Length:
7.680” (195.0mm)
Weight:
0.57 lbs. (0.26kg.)
04-TG2
Tie Gun
Description:
Hand held tie gun rapidly tensions and cuts off excess cable
tie without leaving behind any sharp edges that would cause
cuts, snags, and abrasions. Saves time by automatically
cutting off excess when selected tension has been achieved.
Saves time on installation with one pull of its trigger to pro‐
duce a very consistent tension from one cable tie to the next.
For use with 18, 40 and 50 lb. cable ties.
Material:
Metal
Length:
6.500” (165.0mm)
Weight:
0.66 lbs. (0.30kg.)
NTE Electronics, Inc. D Voice (973) 748-5089 D FAX (973) 748-6224 D http://www.nteinc.com
11
Loading...