NTE Electronics HD SERIES Catalog Page

HIGH–FREQ ALUMINUM ELECTROLYTIC

HD SERIES

SUBMINIATURE
(Radial Lead, Horizontal Deflection)

The NTE HD series o f aluminum electrolytic n on–polarized
capacitors are designed specifically for horizontal deflec­tion current c orrection w here high frequency and h igh r ipple
current occur.

RATINGS

Capacitance Range: 1.0µf to 10µf
Tolerance: ±20%
Voltage Range: 25 Volts and 50 Volts

PERFORMANCE SPECIFICATIONS

Operating Temperature Range:

–25°C to +85°C (–13°F to +185°F)

Leakage Current: I ≤ 0.2CV (measured after

5 minutes of applied rated voltage)

I = Leakage Current (µA)
C = Nominal Capacitance (µf)
V = Rated Voltage (V)

MECHANICAL SPECIFICATIONS

Lead Solderability:

Meets the requirements of MIL–STD 202,
Method 208

Marking:

Consists of series type, nominal capacitance,
rated voltage, temperature range, anode and/or
cathode identification, NTE identification.

Recommended Cleaning Solvents:

Methanol, isopropanol ethanol, isobutanol, petro­leum ether, propanol and/or commercial deter­gents. Halogenated hydrocarbon cleaning
agents such as Freon (MF, TF, or TC), trichloroe­thylene, trichloroethane, or methylchloride are
not recommended as they may damage the ca­pacitor.

CASE SIZE AND DIMENSIONS:

Insulating

Sleeve

15.0 Min

d Ø

A ±0.5

Capacitance Tolerance: ±20% (M)

measured at +20°C (+68°F), 1kH

Z

Load Life: 1000 Hrs @ 12V DC, +70°C (+158°F),

at specified ripple current
Leakage Current: Initial specified value or less

Dissipation Factor: < 200% of specified value
Capacitance Change: Within ±15% of initial value

Shelf Life: 500 Hrs @ +85°C (+185°F),

no voltage applied
Leakage Current: Initial specified value or less

Dissipation Factor: < 200% of specified value
Capacitance Change: Within ±15% of initial value

ORDERING INFORMATION

HD 4.7 M 50
Series
Capacitance
Tolerance
Voltage

L’ 5.0 Min

D’ Ø

HD Series Dimensions:

Diameter (D Ø) x Length (L): mm

Capacitance

(µf)

1.0 12.5 x 20 2.0

2.2 12.5 x 25 3.0

3.3 16 x 25 4.0

4.7 16 x 31.5 5.0

5.6 16 x 31.5 6.0

6.8 16 x 35.5 7.0

8.2 18 x 35.5 8.0

10.0 18 x 40 9.0

* Allowable ripple current @ 70°C, 12V DC, and 15.75kH

25V and 50V Ripple Current*

)

(A

p–p

HD Mechanical Specs: Dimensions (mm)

Outside Diameter (D Ø) 12.5 16 18
Lead Spacing (A) 5.0 7.5 7.5
Lead Wire (d Ø) 0.6 0.8 0.8

Z

9NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX [phone] D http://www.nteinc.com