NTE Electronics 16 Catalog Page

Features
Vernier Scale
No. 2-56 Spline Socket Set Screw for Mounting
Brake Lever Knob
Open Window Display
Satin Chrome Finish, Black Markings (503-0004) Black Chrome Finish, White Markings (503-0005)
Spectrol Model 16
Dial - 7/8” diameter, 1/4” dia shaft
NEW
Numeric
Spectrol No. NTE Part No.
18-1-11** 503-0004 Vernier Scale 15 D2
16-1-21 503-0005 Vernier Scale 15 D2
Display
No. of Turns
** 16-1-11 has been discontinued by Spectrol and has been replaced
by 18-1-11.
Diag
No.
D2
.625
(15.88)
Dia
.250
.410
(6.35)
(10.41)
Dia
Dia
.155 (3.94) .875 (22.22)
.310 (7.87)
.875 (22.22)
.562 (14.27)
.812 (20.62) Min
.562 (14.27) R
30°
50°
Note: Mounting bracket may vry
Specifications
Operation
Readout and Operation: Unit shall register a total count of 15 turns.
The number in the window (0 thru 14) indicates completed number of turns of the drive sleeve. Graduated circular dial indicates the percent of a partial turn of the drive sleeve.
Minor Scale Division: 1/50 turn Indication: 0 to 14.99 turn Brake Lever: 1st position (15° movement of brake lever) operates a
high torque system for fine adjustment; 2nd position (15° additional movement of brake lever) actuates brake. Accuracy: Backlash shall be zero between graduated dial and drive sleeve Rotation: The indication shall increase with clockwise and decrease with a counterclockwise rotation. Transfer Point: The number in the center of the window shall change as graduated dial rotates between 94 and 0.
Mechanical
Shaft Bore: 0.250” Runout: 0.004 in/in (Note 1) Mounting: Install mounting bracket (included) between panel and
panel nut. Multidial shall mount directly to shaft with No. 2-56 spline socket set screw, located adjacent to No. 50 on graduated dial (hex key included).
Note 1. Dial to be free running and without binds when axis of drive
sleeve is perpendicular to mounting surface within the specified dimension.
NTE Electronics, Inc. D Voice (973) 748-5089 D FAX (973) 748-6224 D http://www.nteinc.com
33
Loading...