NTE980
Integrated Circuit
CMOS, Micropower Phase–Locked Loop (PLL)
Description:
The NTE980 CMOS Micropower Phase–Locked Loop (PLL) consists of a low–power, linear voltage–
controlled oscillator (VCO) and two different phase comparators having a common signal–input amplifier and a common comparator input in a 16–Lead type package. A 5.2V zener diode is provided
for supply regulation if necessary.
Features:
D Very Low Power Consumption: 70µW (Typ) @ VCO fo = 10kHz, VDD = 5V
D Operating Frequency Range up to 1.4MHz (Typ) @ V
D Low Frequency Drift: 0.04%/°C (Typ) @ V
DD
= 10V
D Choice of Two Phase Comparators:
Exclusive–OR Network (I)
DD
w
/Phase–Pulse Output for Lock Indication (II)
= 10V
Edge–Controlled Memory Network
D High VCO Linearity: < 1% (Typ) @ V
D VCO Inhibit Control for ON–OFF Keying and Ultra–Low Standby Power Consumption
D Source–Follower Output of VCO Control Input (Demod. Output)
D Zener Diode to Assist Supply Regulation
D Standardized, Symmetrical Output Characteristics
D 100% Tested for Quiescent Current at 20V
D 5V, 10V, and 15V Parametric Ratings
= 10V, RI = 5kΩ
DD
Applications:
D FM Demodulator and Modulator
D Frequency Synthesis and Multiplication
D Frequency Discriminator
D Signal Conditioning
D FSK – Modems
D Data Synchronization
D Voltage–to–Frequency Conversion
D Tone Decoding
Absolute Maximum Ratings:
DC Supply Voltage Range (Voltages referenced to VSS terminal), V
DD
–0.5 to +20V. . . . . . . . . . . .
Input Voltage Range, All Inputs –0.5 to V
DC Input Current, Any One Input ±10mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Dissipation (T
T
= +60° to +85°C Derate Linearly at 12mW/°C to 200mW. . . . . . . . . . . . . . . . . . . . . . . . . . . .
A
Device Dissipation Per Output Transistor (T
Operating Temperature Range, T
Storage Temperature Range, T
Lead Temperature (During Soldering, 1/16” ±1/32” from case, 10sec Max), T
= –40° to +60°C), P
A
A
stg
D
= –40° to +85°C) 100mW. . . . . . . . . . . . . . . . . . . . . . .
A
–65° to +150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L
–40° to +85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DD
500mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
+265°C. . . . . . . . . . .
+0.5V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Operating Conditions: (TA = –40° to +85°C)
Parameter Min Typ Max Unit
Supply Voltage Range VCO Section:
As Fixed Oscillator
3 – 18 V
Phase–Lock–Loop Operation 5 – 18 V
Supply Voltage Range Phase Comparator Section:
Comparators
3 – 18 V
VCO Operation 5 – 18 V
Static Electrical Characteristics: (TA = +25°C unless otherwise specified)
Test Conditions
Parameter Symbol
V
O
VCO Section
Output Low (Sink) Current IOLMin 400mV 0V, 5V 5V 0.51 1.0 – mA
500mV 0V, 10V 10V 1.3 2.6 – mA
1.5V 0V, 15V 15V 3.4 6.8 – mA
Output High (Source) Current IOHMin 4.6V 0V, 5V 5V –0.51 –1.0 – mA
2.5V 0V, 5V 5V –1.6 –3.2 – mA
9.5V 0V, 10V 10V –1.3 –2.6 – mA
13.5V 0V, 15V 15V –3.4 –6.8 – mA
Output Voltage: Low–Level VOLMax
Pin4
driving
CMOS
CMOS
Output Voltage: High–Level VOHMax
e.g.
Pin3
Input Current IINMax – 0V, 18V 18V – ±10
Phase Comparator Section
Total Device Current
Pin14 = Open, Pin5 = V
DD
IDDMax – 0V, 5V 5V – 0.1 0.2 mA
– 0V, 10V 10V – 0.5 1.0 mA
– 0V, 15V 15V – 0.75 1.5 mA
– 0V, 20V 20V – 2.0 4.0 mA
Pin14 = VSS or VDD, Pin5 = V
DD
– 0V, 5V 5V – 10.0 20.0 µA
– 0V, 10V 10V – 20.0 40.0 µA
– 0V, 15V 15V – 40.0 80.0 µA
– 0V, 20V 20V – 80.0 160.0 µA
Output Low (Sink) Current IOLMin 400mV 0V, 5V 5V 0.51 1.0 – mA
500mV 0V, 10V 10V 1.3 2.6 – mA
1.5V 0V, 15V 15V 3.4 6.8 – mA
Output High (Source) Current IOHMin 4.6V 0V, 5V 5V –0.51 –1.0 – mA
2.5V 0V, 5V 5V –1.6 –3.2 – mA
9.5V 0V, 10V 10V –1.3 –2.6 – mA
13.5V 0V, 15V 15V –3.4 –6.8 – mA
V
IN
V
DD Min Typ Max Unit
0V, 5V 5V – 0 0.05 V
0V, 10V 10V
–
0 0.05 V
0V, 15V 15V – 0 0.05 V
0V, 5V 5V 4.95 5.0 – V
0V, 10V 10V 9.95 10.0 – V
0V, 15V 15V 14.95 15.0 – V
–5
±0.1 µA